Professional Documents
Culture Documents
EP03-210-200
Release 201
Revision Date: March 23, 2004
Version 1.1
Experion Station Specifications and Technical Data EP03-210-200
Release 201 Version 1.1
-i-
Experion Station Specifications and Technical Data EP03-210-200
Release 201 Version 1.1
Revision History
Revision Date Description
0.1 12 August 2003 Release 200 Preliminary Revision
1.0 16 December 2003 Release 200 Final Revision
1.1 19 March 2004 Update for R201 Release (no content changes)
- ii -
Experion Station Specifications and Technical Data EP03-210-200
Release 201 Version 1.1
Introduction
Experion PKS embeds In addition to embedding Distributed Control
Experion PKS three decades of System (DCS) technologies, Experion PKS
The Next Honeywell process integrates powerful knowledge-driven
Generation control, asset decision support and diagnostic tools,
Process management, and providing information where and when it is
Knowledge domain expertise, needed. This revolutionary system
System combined with Six Sigma approach unifies business, process, asset,
methodologies, into a and safety management to:
unified Process Knowledge System • Facilitate knowledge capture
architecture. Experion PKS optimizes work • Promote knowledge sharing
processes, improves routine maintenance • Optimize work processes
efficiencies, and releases personnel from • Accelerate improvement and
manual processes. Capturing and innovation
managing untapped process knowledge in a
single Process Knowledge Solution™, Unified, Collaborative
Experion PKS delivers process and control
data using innovative technologies that are Architecture
only offered by Honeywell. These Experion PKS is a unified, collaborative
technologies fully integrate with existing architecture with state-of-the-art DCS
Honeywell systems, including TPS, capabilities that encompass Abnormal
TDC2000®, TDC3000®, TotalPlant® Alcont, Situation Management® (ASM®), Safety
FSC, and the PlantScape® system. Management, and Information Management
technologies. Experion PKS interfaces with
FOUNDATION* Fieldbus, Profibus,
Process Knowledge – DeviceNet, LON, ControlNet and Interbus.
Beyond Distributed Control Robustness, security, compliance, control,
safety, and reliability are plant-wide,
Experion PKS Process Knowledge penetrating all layers of the architecture to
capabilities expand the provide the only
role of distributed control, available high-
addressing all of performance, plant-
manufacturing’s critical wide infrastructure.
business objectives to Experion PKS’
facilitate knowledge distributed control
sharing and workflow features include a
management. The result complete continuous,
is improved operating logic, sequential, and
profit, capital cost and drive object-oriented
cash flow. Delivering a control environment
robust, scalable, plant- hosted on fully
wide system, Experion redundant controllers.
PKS connects your
operations staff with the By unifying the plant-
latest automation wide architecture,
technology as well as Experion PKS allows
with each other. Built on you to make the right
a rock-solid foundation of product at the right time, optimize and
process control and safety system know- automate, increase workforce effectiveness,
how, this next-generation system provides and increase availability of resources while
unprecedented connectivity through all reducing incidents. Rather than taking the
levels of process and business operations. narrow instrument-centric approach that
This is a truly collaborative production and informs you only when there is a need to
safety management solution. replace a valve or perform maintenance,
-1-
Experion Station Specifications and Technical Data EP03-210-200
Release 201 Version 1.1
Redundant
Servers
GE Fanuc
Versamax
Comprehensive
Support for
Smart Field
Ethernet Devices
Video as a Process Input!
-2-
Experion Station Specifications and Technical Data EP03-210-200
Release 201 Version 1.1
Functional Description
Experion Station Experion Station – Flex
The Experion Station employs industry- The ES-F is a very versatile operator
leading technology and advanced features interface. Since it utilizes a client-server
to provide the operations platform required relationship to present process data to the
for today’s enterprises. Addressing today’s operator, it can be applied anywhere as long
needs and tomorrow’s requirements is the as it has a connection to the server (or
hallmark of the HMIWeb technology at the redundant servers), including Internet,
heart of the Experion Station. wireless and dial-up connections.
There are several types of Experion Station When configuring an ES-F, the user has a
available to satisfy a broad range of needs. choice of connection methods:
They include:
• Static – Provides a permanent,
• Experion Station – Flex (ES-F) dedicated link to a specific ES-F.
• Experion Station – Console (ES-C) This is the recommended
• Experion Station – Console connection type when used for
Extension (ES-CE) fulltime operations.
• Experion Station – TPS (ES-T) • Rotary – Provides an “as required”
Note that the ES-T encompasses many connection to an ES-F. This is the
functions specific to the migration of TPS. recommended connection type for
As such, it’s technical data and staff who do not need full-time
specifications are included in document access. Rotary connections are
EP03-220-200, TPS Integration advantageous from a licensing point
Specification and Technical Data. of view because your license only
specifies the number of
In addition to the Experion Stations cited simultaneously connected ES-Fs
above, a wireless configuration is also (concurrent-use licensing).
available. Mobile Station PKS is discussed
on page 5. Rotary Stations also provide the option of
using the Experion Station interface or
All Experion Station types utilize the same Microsoft’s Internet Explorer (IE). IE is ideal
operator interface and share the available for staff that wants to use familiar desktop
feature set for consistent operation tools to interact with the process. All the
regardless of node. This also means that security mechanisms (see page 11) of the
configuration is simplified as custom Experion Station are employed when using
displays, trend sets, etc. are configured Internet Explorer to protect your process
once and available across the various types from unauthorized changes.
of Experion Stations.
Server
ES-F ES-F
A mix of Experion Station types can be
implemented to provide the most
Dynamic
appropriate, site-specific solution possible. Cache
For example, a site may choose to
implement a mix of ES-Cs and ES-CEs in a
central control room. ES-Fs could be used
on the plant floor, in satellite control rooms,
and in the engineering and maintenance
offices. Additionally, casual users
throughout the enterprise may use ES-Fs or C200 Controllers
eServer solutions (see PN PN03 - 103E,
Data and Alarms/Events owned by CEE Devices
eServer Product Information Note). (C200, FIM, ACE, etc.) and published to Server
Data and Alarms/Events presented by
ES-F
-3-
Experion Station Specifications and Technical Data EP03-210-200
Release 201 Version 1.1
The performance benefits even reach above processes that run continuously and require
and beyond the economic benefits of operations personnel to maintain a constant
implementing ES-Fs in an Experion PKS view of that process.
architecture. For instance, the Experion
PKS Server subscribes to data and Some key characteristics of the ES-C
alarms/events on a proxy basis for each ES- include:
F as required. This results in the minimum • Direct connection to data and
possible communications to the CEE alarms/events for CEE-based
Devices (C200 controller, ACE, etc.) as devices such as the C200 controller,
shown in Figure 2. ACE, etc. within a Server cluster.
• No duplicate database configuration
A full description of specific Experion Station – no extra engineering effort to add
features begin on page 6 of this document. an ES-C to a system
Page 22 is the beginning of the technical • Multi-window functionality (including
specifications for the hardware and SafeView®) is standard functionality
software. with each ES-C
• Honeywell’s Fault Tolerant Ethernet
Experion Station – Console (FTE) support is standard
An ES-C provides all the capabilities of an functionality with each ES-C
ES-F except that it communicates directly to
the Experion PKS CEE subsystem (supports Additional functionality known as Console
devices such as the C200 controller, ACE, functions will be delivered in late 2004.
etc). This provides a high-availability These functions are dependent upon the
operations platform for critical processes. ES-C and ES-CE nodes. Console functions
This node is designed specifically for include items such as the ability to segment
alarm acknowledgement scope, cross
screen invocation, and more.
ES-C ES-C
Server
ES-F ES-F
Dynamic
Cache
Data and
Alarms/Events owned
by CEE Devices (C200, C200 Controllers
FIM, ACE, etc.) and
published to the Server
Data and Alarms/Events presented by ES-F
Data and Alarms/Events owned by C200s and published to ES-Cs
-4-
Experion Station Specifications and Technical Data EP03-210-200
Release 201 Version 1.1
ES-CE ES-C
Server
ES-F ES-F
Dynamic
Dynamic Cache
Cache
Data and
Alarms/Events owned
by CEE Devices and C200 Controllers
published to the Server
Data and Alarms/Events presented by ES-F
Data and Alarms/Events owned by CEE Devices and published to ES-Cs
Data and Alarms/Events presented ES-CE
-5-
Experion Station Specifications and Technical Data EP03-210-200
Release 201 Version 1.1
Common Experion Station graphic shows the most recent (or oldest)
highest priority, unacknowledged alarm at all
Features times.
The Experion PKS Human Machine
Interface (HMI) utilizes Honeywell’s HMIWeb The Experion Station can be customized to
technology, a Web-based architecture that provide the appropriate operating
allows HMIs, application data, and business environment for an operator, site or
data to be integrated. HMIWeb utilizes company. This includes the ability to add
Honeywell’s next-generation operator and modify toolbars, menus and keyboard
interface technology, which uses HTML as shortcuts of the Experion Station.
the native display format to provide access
to process graphic displays from either the Standard System Displays
secure Experion Station environment or
Standard system displays make it easy for
directly from Microsoft’s Internet Explorer,
operators to learn and use the system. An
without functionality-reducing exports or
extensive range of standard displays is
cumbersome plug-ins. The use of an open,
available including:
industry standard file format reduces
• Menu/navigation displays
engineering time while allowing users to
• Alarm summary
take advantage of existing knowledge and
reuse displays between systems. Full • Event summary
support for displays from earlier PlantScape • Trends
release file formats ensures direct migration • Operating groups
path for existing PlantScape release • Point details
systems. These benefits are all achieved • Popup faceplates
while maintaining secure access, robust • System status displays
design, and high performance. • Configuration displays
• Loop Tuning displays
The Experion Station HMI allows for state of • Diagnostic and maintenance displays
the art, object based graphics to provide a • Summary displays
powerful interface for the user. The use of
industry standards, such as Microsoft Live Video
Windows 2000 and XP, Ethernet, HTML and
the Internet, minimize operator training by Live video integration is an important feature
providing a familiar operating environment at where remote sites may be unmanned. The
all times. Experion Station not only allows the
operator to view live video from remote
The HMIWeb Station makes extensive use locations but also provides the ability to
of user configurable pull-down menus and switch cameras, and pan, tilt or zoom the
toolbars to allow easy, intuitive navigation camera to focus in on a particular area. The
and fast access to key process data. The integrated video can be displayed from any
usability of the operator interface is further video source, and accessed in Experion
enhanced with features such as recently Station via a simple video card, a networked
used command list, copy and paste, live video streamer, or alternatively the Digital
video integration, ActiveX support, scripting, Video Manager (see page 21) solution
launching applications and support for available from Honeywell.
standard peripherals such as:
• Sound cards, OPC Display Data Client
• Touch screens, The OPC Display Data Client allows the
• Multi-screen video cards, and user to insert OPC Data onto a display
• Trackballs. without the need to build points (the user is
not required to purchase SCADA points for
Critical information is conveyed using OPC Data of this type). This is ideal for data
dedicated annunciators for alarms, system that just needs to be visualized by the
events and operator/controller messages. A operator and does not need to be alarmed,
dedicated alarm line at the bottom of each historized, etc. OPC Data that is acquired in
this fashion supports both reads and writes.
-6-
Experion Station Specifications and Technical Data EP03-210-200
Release 201 Version 1.1
-7-
Experion Station Specifications and Technical Data EP03-210-200
Release 201 Version 1.1
addition to this
feature, the
alarm
annunciator in
the Station
status zone
blinks with the
color of the
highest priority
unacknowledged
alarm – another
time saving
feature for plant
personnel.
-8-
Experion Station Specifications and Technical Data EP03-210-200
Release 201 Version 1.1
-9-
Experion Station Specifications and Technical Data EP03-210-200
Release 201 Version 1.1
Trending
Flexible Trend Configuration
allows trends to be configured on
line as necessary by simply
selecting the point and the
parameter from the database.
Any of the history collection
intervals may be used as the
basis. Standard trend types
include:
• Single bar graphs
• Dual bar graphs
• Triple bar graphs
• Multi-plot trends
• Multi-range trends
• X-Y scatter plots, Figure 10. Simple Copy/Paste of Trend Data
• Numeric tables
• S9000, Micromax and
UMC800 Set Point Program plots
Group Displays
• Group trends
Standard Group Displays are provided to
Functions providing data analysis include: allow configuration of panel board-like
displays. By grouping related points into a
• Combination real-time/historical
Group Display, operators can more easily
trending
interpret process activity.
• Trend zooming, panning, and
scrolling
• Hairline readout
• Declutter
• Configurable trend density
• Simple recall of archived history
• Trend protection
• Smart clipboard support for
copy/paste of data
- 10 -
Experion Station Specifications and Technical Data EP03-210-200
Release 201 Version 1.1
- 11 -
Experion Station Specifications and Technical Data EP03-210-200
Release 201 Version 1.1
- 12 -
Experion Station Specifications and Technical Data EP03-210-200
Release 201 Version 1.1
Associated Stations
Experion Station can be configured so that Area Profiles
the current display is “sent” for display to An Area Profile consists of an Area List,
one of two other Experion Stations when a containing one or more areas, and an Area
particular keyboard shortcut is used at the Time Period. If you are using operator-
original Experion Station. The Experion based security, Area Profiles provide:
Station to which the display is sent is known • Additional security, through the
as an “Associated Station.” This provides a ability to assign areas only for
simple mechanism for an operator to view specified times.
displays on many Experion Stations while • A method of giving an operator
controlling from a single Experion Station. additional access at specified times.
Additionally, scripts and other display For example, after hours monitoring
mechanisms can use the Associated Station from a central location.
functionality to automatically call up displays • A quick way of assigning areas to
of interest. operators.
To use Area Profiles, you need to:
Station Scripting Objects 1. Configure the areas in the system
Sophisticated Experion Station 2. Configure Area Lists
customization can be implemented by 3. Configure Area Time Periods
creating Station Scripts that can be run on 4. Configure Area Profiles
an Experion Station. For example, you
might want to configure Experion Station so When defining the Area list, the chosen area
that a specific display is shown on operator access can be refined to include view only,
changeover. acknowledge only, or full control capability.
- 13 -
Experion Station Specifications and Technical Data EP03-210-200
Release 201 Version 1.1
Efficient Workspace
The HMIWeb Display Builder tool
provides a Display Area (see Figure 13)
for the user to create and modify custom Toolbars
displays. In addition, there are dockable
menus and toolbars that can be placed
where the user prefers. An object Figure 12. HMIWeb Display Builder Layout
explorer is provided to present a tree
view of all objects in the display. The
tree of objects can be presented in Transformation functions extend the display
alphabetical order by name or in stacking developers ability to create objects appropriate
order (order placed in display). All object for their installation. These include the ability
properties are presented in a modeless (click to rotate the object to the left or right as well as
on new object to present properties without flipping horizontally or vertically. In addition,
closing window) Properties Window. the user can choose to perform Union,
Difference, Intersection, Exclusive Or, and
The Display Area can be optionally enhanced Join (used to create a “closed” object from
to include a ruler and grid. The grid is user multiple “open” objects) functions on groups of
configurable and includes the ability to force objects to create complex display objects.
objects to align to the grid. Figure 14 illustrates these concepts further.
The final transformation functions include
Standard Tools Combine and Uncombine. Combine is used
HMIWeb Display Builder is equipped with to improve the performance of an extremely
standard functions for building, modifying, and
saving a display. Functions include: New
Display (Display, Template Display, Popup,
Shape Sequence, and Dynamic Shape),
Open, Close, Save, Save As, Save All, Page
Setup, Print, Print Preview, and recently used
File List. Standard editing functions include
Undo/Redo (user configurable number of
levels), Cut/Copy/Paste, Duplicate, Delete,
and Select All. View functions include Zoom,
Ruler, Grid, and Snap to Grid.
- 14 -
Experion Station Specifications and Technical Data EP03-210-200
Release 201 Version 1.1
complex display by combining static vector The following types of graphics can be
graphic objects — this converts them into a inserted:
single metafile, which is easier to render. • Windows Bitmap (*.bmp)
Uncombine reverses this function. • JPEG Image (*.jpg)
• Metafile (*.wmf)
The node editor further extends the flexibility in • Enhanced Metafile (*.emf)
creating display objects (see Figure 15). • Portable Network Graphic (*.png)
• CompuServe GIF (*.gif)
Script
Although the majority of animation
requirements are met with native functions
provided by the HMIWeb Display Builder,
display scripts can also be employed as
necessary. HMIWeb displays are DHTML
(Dynamic HTML) pages that are based on
the Web-standard Document Object Model
(DOM). Therefore, display scripts are very
Figure 15. Modifying a Rounded similar to scripts used in standard Web
Rectangle with the Node Editor pages.
HMIWeb Display Builder
provides standard tools for
manipulating items such
as text, color, and lines.
These tools adhere to
defacto Microsoft
standards to make the
display developer as
effective as possible.
Data-bound Objects
Standard objects are
supplied to allow easy
links to real-time data in
the Experion PKS
database. Objects
include alphanumeric,
checkbox, pushbutton,
indicator, combobox, Figure 14. HMIWeb Display Builder Script Editor with Sample
chart, alarm table, and Display Script Written with the Aid of Intellisense
event table.
Scripts can be written in either VBScript or
ActiveX Jscript. This is a configurable selection per
In addition to standard data bound objects, display. The script editor supports the
the user can enhance the capabilities of a Intellisense feature that displays information
display by inserting objects such as ActiveX in lists and popups as you write your code.
documents and ActiveX controls. Figure 15 shows a sample script and the
Intellisense feature in the script editor.
Graphics
Scripts are event-driven, which means that a
Inserting digitized photographs, schematic script only runs when the associated event
drawings and other suitable graphics can occurs.
significantly enhance your displays.
Displays support event bubbling, which
means that an event passes up the object
- 15 -
Experion Station Specifications and Technical Data EP03-210-200
Release 201 Version 1.1
hierarchy until it reaches an object that has guidance to the user on where to improve the
a script for that event. For example, if a construction of the display.
user clicks an object that is part of a group,
the event can bubble up from the object, to The final set of tools is called Display Builder
the group and finally to the page. Assistant. It allows a display developer to
perform operations on collections of displays
Event bubbling allows the user to write files. These operations include the ability to
page-level scripts that handle a particular rename points for a set of files; upgrade
event for all objects – this technique makes shapes in a set of files; and archive (and un-
it easier to maintain and debug scripts. For archive) a set of display files. An archive
example, rather than writing a separate encapsulates the display and all its
onclick script for each object, simply write associated files (bitmaps, data definitions,
one onclick script for the page. Such a etc.) into a single text-based file. The text
script would check which object generated file is easily integrated with source control
the event and then perform the appropriate systems, more easily transmitted via e-mail,
task. Note that properties can be set to turn etc.
event bubbling off, if necessary.
Shape Gallery
The Shape Gallery makes it
easy to insert shape
sequences and dynamic Figure 16. Shape Gallery Tool
shapes (see page 17) into
your display. Additionally, a preview tool is
provided with the Gallery to help the user by Display Types
previewing the shape’s animation. Display
- 16 -
Experion Station Specifications and Technical Data EP03-210-200
Release 201 Version 1.1
- 17 -
Experion Station Specifications and Technical Data EP03-210-200
Release 201 Version 1.1
- 18 -
Experion Station Specifications and Technical Data EP03-210-200
Release 201 Version 1.1
Options
• The operator cancels the Electronic
Electronic Signatures Signature dialog box.
The Electronic Signatures option is • A timeout has been set for the
specifically designed to support users (such action and the time has been
as the Pharmaceutical industry) that must exceeded before the signing was
meet the requirements of 21 CFR Part 11. complete.
However, it is also useful to any user • The operator does not have the
requiring the ability to absolutely trace all appropriate security level required
operator actions. Electronic signatures are for the action.
the legally binding equivalent of an
operator’s handwritten
signature. This feature
allows operator actions,
such as acknowledging a
message or controlling a
point, to request one or
more electronic
signatures to complete
the action.
Electronic Signatures
requires the use of
operator-based security
integrated with Windows
2000 accounts.
An action can be
configured to require
single or double
signatures as well as a
reason for the action. A
set of reasons must be
configured so that the
operator can select from
this set at the time of
signing. A reason set
can contain up to 32 Figure 20. Sample Electronic Signature for a Message
reasons. Acknowledgement
The legal text displayed in the Electronic
Events recording the names of the operators
Signatures dialog box can be customized to
responsible for the action, date, time and
meet site requirements. The legal text
reasons are generated and stored in the
informs the operator that their electronic
events database (see document EP03-200-
signature is the legally binding equivalent of
100, Server Specifications and Technical
their handwritten signature.
Data). These events can be viewed in the
Event Summary. If an operator partially
completes signing an action and then
Specialized Keyboards
cancels the action, an event is also Honeywell offers two specialized keyboards
generated. for use with Experion Station. They are the
Integrated Operator Keyboard (IKB) and the
Operator actions are not complete if: Operator Entry Panel keyboard (OEP).
• The user name or password
provided by the operator is invalid.
- 19 -
Experion Station Specifications and Technical Data EP03-210-200
Release 201 Version 1.1
- 20 -
Experion Station Specifications and Technical Data EP03-210-200
Release 201 Version 1.1
- 22 -
Experion Station Specifications and Technical Data EP03-210-200
Release 201 Version 1.1
Multi-window Functionality
Specification
1
Multiple Static Station Option
- 23 -
Experion Station Specifications and Technical Data EP03-210-200
Release 201 Version 1.1
Model Numbers
Experion Station Hardware
Model Number Description
MZ-NTPC61 Operator Station with Windows XP
MZ-NTPC31 Operator Station with Windows 2000 Professional
MZ-PCRT06 High Resolution 21” Monitor
TP-DFP201 Desktop 20.1” Flat Panel Display
MZ-PCEB22 Ethernet Comm. Board, 100 Mbps for Station PC (For FTE models,
see FTE Specifications and Technical Data)
MZ-PCEM24 1 GB Memory Expansion Module for Station PC
MZ-DVID01 Dual Display Video Card, 32 MB per channel (for installation in the
Station PC)
TP-DSOEP1 Desktop Operator Entry Panel
TP-OPADP1 Operator Entry Panel Adapter to Com Port
TP-DUIKBN Desktop Integrated Keyboard w/o Trackball, USB Interface
MZ-PCDD06 Trackball w/PS-2 Connector
EP- EPKY01 Experion PKS Keyboard Overlay
- 24 -
Experion Station Specifications and Technical Data EP03-210-200
Release 201 Version 1.1
Glossary
Include if necessary.
- 25 -
Experion Station Specifications and Technical Data EP03-210-200
Release 201 Version 1.1
Experion PKS
www.experionpks.com
TotalPlant ® and Experion PKS® are registered trademarks and Process Knowledge System™ and PKS™ are
trademarks of Honeywell International Inc. All other products and brand and product names shown herein are trademarks
of their respective owners.
* FOUNDATION is a trademark of the Fieldbus Foundation.
While this information is presented in good faith and believed to be accurate, Honeywell disclaims the implied warranties
of merchantability and fitness for a particular purpose and makes no express warranties except as may be stated in its
written agreement with and for its customer. In no event is Honeywell liable to anyone for any indirect, special or
consequential damages. The information and specifications in this document are subject to change without notice.
USA: Honeywell Industry Solutions, 16404 N. Black Canyon Hwy., Phoenix, AZ 85053 /Canada: The Honeywell Centre, 155 Gordon
Baker Rd., North York, Ontario M2H 3N7/Latin America: Honeywell, Inc., 480 Sawgrass Corporate Parkway, Suite 200, Sunrise, Florida
33325/Japan: Honeywell K.K., 14-6 Shibaura 1-chome, Minato-ku, Tokyo, Japan 105-0023/Asia: Honeywell Pte Ltd., Honeywell Building,
17 Changi Business Park Central 1, Singapore 486073, Republic of Singapore/Pacific Division: Honeywell Pty Ltd., 5 Thomas Holt Drive,
North Ryde NSW Australia 2113/Europe and Africa: Honeywell S.A. Avenue du Bourget 3, 1140 Brussels, Belgium/Eastern Europe:
Honeywell Praha, s.r.o. Budejovicka 1, 140 21 Prague 4, Czech Republic/Middle East: Honeywell Middle East Ltd., Technology Park, Cert
Complex Block Q, Muroor Rd., Abu Dhabi, U.A.E.
Industry Solutions
www.acs.honeywell.com
©Honeywell International Inc.
Subject to Change - 26 -