Professional Documents
Culture Documents
Where protected XPIC links are installed (dual ODUs on a common feed) an
equal-loss coupler should be used. Unequal couplers will reduce XPD.
XPIC links must be configured for identical frequency, Tx power and
bandwidth/modulation, and ATPC must not be used.
ODUs must be from the same sub-band (not from overlapping sub-bands).
o Where a dual-polarized antenna presents the same orientation on both ports, one
should have a straight waveguide feed to the antenna feedhead, the other will in-
clude a 90 degree twist or have a straight waveguide feed but with a polarization ro-
tator in the feedhead. Generally the polarization rotator will act on the outer-most
waveguide on the feedhead.
o For convention, if ports are not marked for V and H, it is recommended that the
port that has the straight waveguide feed or is connected to the inner-most
waveguide at the feedhead is selected as the horizontal antenna feed port. The fol-
lowing graphic of an antenna feedhead assembly illustrates this. The top port is
connected to the inner feed on the feedhead, and with the port orientation shown
provides a horizontally polarized feed. The lower port has a rotator included in the
feedhead to provide a vertical feed.