M Code

M2 Program End
M17 Enable/Power all stepper motors
M18 Disable all stepper motors
M82 Set extruder to absolute mode
M83 Set extruder to relative mode
M84 Stop idle hold
M104 Set Extruder Temperature
M105 Get Extruder Temperature
M106 Fan On
M107 Fan Of
M109 Set Extruder Temperature and Wait
M190 Wait for bed temperature to reach target temp
G Code
G1 Move (linear move)
G20 Set Units to Inches
G21 Set Units to Millimeters
G28 Move to Origin (Home)
G90 Set to Absolute Positioning
G91 Set to Relative Positioning
G92 Set Position
G161 Home axes to minimum
G162 Home axes to maximum