You are on page 1of 3

Root Causes

Electrical Dept.
1 Cable Fault
2 Breaker Switch Malfunction
3 Human Maloperation
4
5
Instrumentation Dept.
Reason

Damaged Insulation due to various reasons


Defective Component
Wrong operation by Maintenance personnel by closing breaker

Dept.
Eliminated?

Yes - By checking insulation resistance of individual cables from 6.6kV breaker to Interface panel at PH-3 Substation
Yes - Breaker switch operation checked and found working OK after incident. It may or may not repeat in the future
Yes - Breaker operation was not recorded in SCADA

You might also like