Professional Documents
Culture Documents
Emerson Process G-Series pneumatic and hydraulic actuators provide global customers with
Management – the latest in valve actuation design. It is a highly unique and reliable means of
operating ball, butterfly or plug valves along with louvers, dampers and other
Valve Automation 90 degree rotating mechanisms. G-Series actuators are back by a five-year
materials and workmanship warranty, the best in the industry.
sets the standards
for innovation and G-SERIES SERIES APPLICATION AND FEATURES
quality in pneumatic • The actuators are PED 97/23/EC compliant to meet the stringent
and hydraulic valve requirements of pressure mounting vessels.
automation. • G-Series actuators meet both IP66 and IP67M specifications for
submergence and high pressure water deluge test. This offers superior
water ingress and corrosion protection.
Bettis G-Series • The actuator has suitability for use within the demanding applications of
actuators are a SIL environment.
• 5-Year Warranty.
Bettis G-Series
with Topworx Positioner
Operating Ranges Reduces Wear
G-Series has guaranteed torque outputs for spring-return The Power-Swivl™ piston rod and guide block connection
models in excess of 3,000,000 lb-in (339,000 Nm) and compensates for side load deflection and reduces wear.
double-acting 12,581 – 6,000,000 lb-in (1420 – 678,000 Nm). Seal-lubricating bearings protect sliding and rotating
Operating pressures are: components.
Pneumatic – 40-220 psig (3-14 Bar)
Hydraulic – to 5,000 psig (345 Bar)
Powr-Swivl™
Resists Corrosion
Tie-bars on pneumatic power
Promotes Safety modules are corrosion resistant, and
The patented Tension-Lok™ device positively locks the spring internal and external surfaces are coated to protect in harsh
module to allow its safe removal and installation, eliminating environments.
accidental release of the spring force.
Seals Positively
With dual drive module vent checks, breather seals , total
O-ring sealing and no gaskets , the G-Series prevents water
ingress and seals out the environment.
Tension-Lok™
Other G-Series Solutions
Pneumatic
Power Module Pneumatic
with Extended Power Module
Travel Stop (Dual Cylinder
(shown)or Configuration)
Jackscrew
Drive
Module
M-11 Override
Extended Travel Stop
for Hydraulic DA
(shown) or Jackscrew
Actuators
Automated Packages
valve control. At our World Area The G-Series adds an extra measure
of versatility with its field serviceable G-Ride™
Configuration Centers (WACC),
modular configuration. It can be Manual Gear
we combine the G-Series actuator, altered from a single acting to a
Override for
G4 & G5
controls and a valve in a single double-acting and add a hydraulic
system . We can integrate a manual override after installation.
complete controls offering including Both the module and spring modules Hydraulic Power Module or
M11 Override Cylinder for
world-class PlantWeb® digital are removable with out the need for DA Pneumatic Actuators
plant architecture. We also supply special tools or disassembly of any
BettiSystems™, pre-engineered and modules. Modules can be purchased
documented controls packages, separately at an Emerson World
Configuration Center and can be
available at our WACC for reducing
serviced at your own maintenance
lead times, simplifying purchasing facility.
and easing installation.
Note: The above graphic does not necessarily depict all modular orientations.
Consult Factory for certified dimensional drawings.
PED/97/23/EC –
Pressure
Equipment
ISO-9001 ABS Directive
World Area Configuration Centers (WACC) offer sales support, service,
inventory and commissioning to our global customers. Choose the WACC
or sales office nearest you:
For complete list of sales and manufacturing sites, please visit The Emerson logo is a trademark and service mark of Emerson Electric Co. Bettis™
www.emersonprocess.com/valveautomationlocations is a mark of one of the Emerson Process Management family of companies. All other
Or contact us at info.valveautomation@emerson.com marks are property of their respective owners.
www.emersonprocess.com/bettis
DOC.6P.BG.US Rev G 08-14