DESCRIPTION Etch wash primer is meant for use on non-ferrous
metals. It is specially formulated for passivating the metal and improves the adhesion of the subsequent primer and finish coatings. It is recommended as a temporary primer on blast cleaned mild steel surfaces. On mild steel substrate, it adds to overall performance of the coating system.
RECOMMENDED USE Used on aluminium cladding, galvanized surfaces and metals
sprayed on steel surfaces. It is also used on mild steel surfaces for preparation. It is recommended as a primer coat for epoxy systems where blast cleaning of the surface is not possible. TYPE Two pack, cold curing.
APPLICATION By brush, roller, conventional or airless spray.
MIXING RATIO Base: Accelerator 1: 1 by volume.
DRYING TIME Surface Dry : 10 -15 mins.
Hard Dry : 2 Hours.
RECOAT INTERVAL Overnight.
POT LIFE 4 hours.
RECOMMENDED DFT 6 to 8 microns per coat.
FINISH Matt.
COLOUR Yellow.
THEORETICAL COVERAGE 6 to 8 Sq Metres/litre at 8 microns.
FLASH POINT Above 22 Deg. C.
THINNER Not recommended.
STORAGE Upto 9 months as long as the sealed containers are kept