Professional Documents
Culture Documents
OBJECT - This method of test covers the procedure for determining the SPECIFIC GRAVITY of small clear specimens of timber.
TEST METHOD: IS:1708-PART-2-1986
APPARATUS -
The apparatus for the standard test shall consist of following:
A) Hot air oven to maintain temperature at 103+/-2 deg. C.
B) Balance to weight 1mg min.
TEST SAMPLE- 1. The dimension of test specimen shall be taken as 6 cm in length and 2 × 2 cm or 15 cm in length and 5 × 5 Cross-section.
TEST PROCEDURE-
The sample shall be weighed with an accuracy of 0.001g in a weighing balance. The dimension of the rectangular section should be
measured correctly to 0.01 cm and volume calculated by multiplying all the three dimensions.
CALCULATIONS-
W1
specific Gravity at test= .................
V1
W1 100
Adjusted Specific gravity = ....................X...................
V1 100+m
where
W1 = weight of sample at test in g, and
V1 = Volume in cm3
m= % moisture content
DESCRIPTION 1
Sides of specimen L cm
B cm
D cm
VOLUME V1 cm3
W1
Specific Gravity at test = ……………..
V1
W1 100
Adjusted Specific gravity = ………….X…………….
V1 100+m