Applications
The Combichem is eminently suitable for the
‘chemical and petrochemical industries. Media
which can be easily pumped are acids, caustics,
nitrogen, ammonia, phosphates, sulphates, nitrates,
chlorides, dyes, oil, solvents, alcohols, sulphides,
light hydrocarbons, aromatics, condensates etc.
Also suitable for textile, Food processing,
pharmaceutical and paper & pulp industries.
Range
Max. capacity 350mm
Max. head 160 m.
Max. pressure 16 bars
Max. temperature 200°C
Standard material C1, CS, Nod Cl,
$8316, Nobler Alloys
Shaft Stainless Steel
Shaft sleeve Stainless Steel
Design
‘The ‘Combichem’ - CC/CCR , is an end suction,
hocizontal, back pull out pump in accordance with
DIN 24256/1S0 2858.
Dynamically balanced closed impeller in radially
split top discharge volute provides smooth flow
of tiquid
Flanges according to ISO 7005 PN 16 for stainless
steel executions, ANSIBI6.5, 150 LBS. is also
available
Features
Combichem process pumps are manufactured to
meet customer specific requirements with optimum
standardization. High degree of mutual inter
‘changeability of components within the 31 models.
‘of Combichem, as well as the Combisystem pump
family, requires minimum assembly time at work
& lower inventory of spares for the customer.
ndardised Process
Pump CC/CCR
Combichem
Seal arrangements
Soft packing arrangement with provision for
‘ushing and sealing liquid connections. Also
available is jacketed stuffing box for high temperature
applications. Generous seal cavity permits easy
fitment of various configuration of mechanical
seals in internal, externa, cartridges types, with
provision for API sealing plans,
A stuffing box supported with cooling jacket can
‘be employed to handle liquids with temperatures,
ranging from 160°C to 200°C. If cooling water
discharges are unacceptable (o the environment, @
Combitherm pump with mechanic
can operate at temperatures up to 200°, is offered.
The Combitherm pump has same dimensions and
hydraulic performances as that of Combichem,
seal which
Bearing arrangements
Employs single piece bearing housing cum bearing
‘bracket that ensures perfect alignment even after
‘Strong over sized shaft with combination of deep
_Brooved angular contact and cylindrical bearings
to withstand radial & axial thrust and ensure
‘continuous extended service life.
‘Two different assemblies, each equipped
with either grease or oil bath lubricating system.
The resulting combinations are completely
interchangeable.
JOHNSON PUMPPerformance overview
ce
cc
mt ri ee
=| imi 1
of [a6 bist 0 a al
- p Lo Laas oe
4 3]
i "4
ss SF
Sew wie 3 www WT Os te
#1500 min a ~m Phen" 3000"? a =
CGR Stainless Steel RE CCR Stainless Stoo! RE
xe)
ae ma
a...)
Jonnson PUMP 2)
JJM sonnson PUMP
al ‘an SPX Process Equipment Operation
Johnson Pump (Indl) Limited
Survey No, 275, Odhav Road, Odhav,Ahmedabad-382 416,
Tel: +91 79 22670311, 2875583, 22872005 Fax: +91 79 22870503, 22672522 E-mail: mareting@ohnsonpump.coin; amish patek@johnsonpump. coin.
For mor information about our worldwide locations, approvals and certifications and local representatives, please visit
www.johnson-pump.com and www.spxpe.com
Jorson Pup esas he go ncomorte ou ats en and mata hangs Wao oe a cbiate,
Desig etre, mata of construction and imensinal dal, as descrbed in ths ule, ar provide or your infomation only and should nt be reed ypon
‘ues confirmed in wg. Ceti drawings ae avalable upon request