Professional Documents
Culture Documents
PRODUCT CATALOG
Creating Innovative Solutions
TABLE OF CONTENTS
QUALITY ASSURANCE 1
MISSION STATEMENT 1
HEALTH & SAFETY POLICY 3
RETRIEVABLE PACKERS 4
RETRIEVABLE CASING PATCH 15
PERMANENT PACKERS 16
PERMENANT PACKER ACCESSORIES 32
BRIDGE PLUGS 34
RETRIEVABLE BRIDGE PLUG 44
CEMENT RETAINERS 48
OPEN HOLE PACKERS 52
CANUCK OPEN HOLE STRADDLE SYSTEM 54
THRU TUBING RESETTABLE INFLATE SYSTEM 58
LINER HANGERS 60
SELECTIVE ACID TOOL ASSEMBLY 66
PRODUCTION ACCESSORIES 67
COIL ACCESSORIES 84
COIL PACKERS 86
MOBILE AND OFFSHORE WORKSHOP 89
Main Office
Box 8964
12 Cuendet Ind. Way
Sylvan Lake, AB Canada
T4S 1S6
p. 403-887-9991
f. 403-887-9908
www.canuckcompletions.com
info@canuckcompletions.co
QUALITY ASSURANCE MISSION STATEMENT
Canuck Completions Ltd. is committed The mission of Canuck Completions
to continuous improvement in quality Ltd is to develop on a long-term basis
and productivity. Quality is defined its activities and to extend services
by customer requirements and by respecting all positive codes of
expectations. Our goal is to provide profession and business ethics, to
high quality, consistent products and meet demands of the Oilfield Market,
superior services that anticipate and to strengthen the existing position on
meet or exceed the requirements of our foreign markets, to win new markets,
customers. All products meet with API to attain the highest level of quality
Standards. recognized worldwide, efficiency, and
at the same time to apply the highest
At Canuck Completions Ltd, we are standards of service, quality control
constantly searching for ways to improve and occupational and environmental
areas for you, our valued customer. protection.
Ultimately, our goal is your complete
satisfaction.
info@CanuckCompletions.com 1
Creating Innovative Solutions
HEALTH & SAFETY POLICY It is the position of Canuck Completions
Canuck Completions Ltd management Ltd management that the company’s
at every level considers the Health safety policies and procedures will, as
and Safety of every employee to be of a minimum, comply with all federal,
extreme importance. Toward this ideal provincial and local regulations applicable
and with a safe workplace as one of our to employee safety. In other countries
main goals, every employee, supervisor, where Canuck Completions operates,
and manager is committed to support the company will likewise comply with
our HSE Program. Injury prevention and regulatory directives that improve and
the maintaining of a safe and healthy enhance employee safety.
working environment for all employees
The HSE Program calls for the participation
benefit Canuck Completions Ltd and
of all employees working toward an
all who work for and with Canuck
environment in which every job or task is
Completions Ltd.
performed in the safest practical manner
Every employee of the company is by a well-trained workforce using the
responsible for personal safety and proper equipment. The benefits of such
the safety of fellow workers. The efforts are numerous and obvious.
responsibility begins with the company
President, and continues through
each level of enagement to each and
every employee to include the newest
employee. This responsibility cannot be
delegated or otherwise set aside.
info@CanuckCompletions.com 3
R E T R I E VA B L E PA C K E R S
4 info@CanuckCompletions.com
R E T R I E VA B L E PA C K E R S
SPECIFICATION GUIDE MECHANICAL SET CX-10 PACKER
info@CanuckCompletions.com 5
R E T R I E VA B L E PA C K E R S
6 info@CanuckCompletions.com
R E T R I E VA B L E PA C K E R S
SPECIFICATION GUIDE WIRELINE SET CWX-10 PACKER
info@CanuckCompletions.com 7
R E T R I E VA B L E PA C K E R S
8 info@CanuckCompletions.com
R E T R I E VA B L E PA C K E R S
Run the tool to setting depth. Pick up Set weight down on the packer, rotate
tubing to allow for setting stroke plus 1/4 right-hand turn at the packer and
desired tubing load. Rotate tubing 1/4 pick up while holding torque. The tool
right-hand turn at the packer. Lower can now be moved and reset or pulled
tubing while releasing torque until from the well.
sufficient weight is applied on packer to
close the bypass valve and set the lower
slips.
info@CanuckCompletions.com 9
R E T R I E VA B L E PA C K E R S
CG-7 Hydraulic Set Packer The CG-7 strokes from the middle of the
tool so that no mandrel movement is
The CG-7 is a hydraulic set mechanical required during the setting of the tool.
packer with dual opposing slips. When An internal mandrel lock system holds
the tubing is pressurized, an internal the packer in the set position until it is
setting cylinder sets the slips and the released. The releasing shear values of
packing element. The setting pressures the packer are easily accessible to allow
can be adjusted to allow for selective field adjustment of the releasing shear.
setting of stacked packers. The tool has Tool is released with straight pull.
an internal balance system.
10 info@CanuckCompletions.com
R E T R I E VA B L E PA C K E R S
CG-7 Features:
• Inexpensive
• Rugged construction
• Shear release
• Pressure balanced.
info@CanuckCompletions.com 11
R E T R I E VA B L E PA C K E R S
12 info@CanuckCompletions.com
R E T R I E VA B L E PA C K E R S
info@CanuckCompletions.com 13
R E T R I E VA B L E PA C K E R S
Casing
Tool OD Tool ID
O.D. Weight
(in) (mm) Range (lbs/ft) Range (kg/m) (in) (mm) (in) (mm)
4 1/2 114.3 9.5 13.5 14.14 20.09 3.750 95.25 1.875 47.63
5 1/2 139.7 14.0 20.0 20.83 29.76 4.625 117.48 2.000 50.80
5 1/2 139.7 20.0 23.0 29.76 34.22 4.500 114.30 2.000 50.80
5 1/2 139.7 14.0 20.0 20.83 29.76 4.625 117.48 2.375 60.33
7 177.8 26.0 35.0 38.69 52.08 5.875 149.23 2.500 63.50
7 177.8 17.0 26.0 25.3 38.69 6.094 154.79 2.500 63.50
9-5/8” 244.5 32.3 40.0 48.07 59.53 8.500 215.90 4.000 101.6
9-5/8” 244.5 43.5 47.0 64.74 69.94 8.375 212.73 4.000 101.6
9-5/8” 244.5 53.5 53.5 79.62 79.62 8.250 209.55 4.000 101.6
14 info@CanuckCompletions.com
R E T R I E VA B L E C A S I N G PATC H
info@CanuckCompletions.com 15
P E R M A N E N T PA C K E R S
16 info@CanuckCompletions.com
P E R M A N E N T PA C K E R S
Permanent Packer
Technology
Canuck’s Metal-to-Metal Backup Shoes
are used to create a Compliant Backup
System featuring Circumferential
deformable metal shoes . This offers
360° casing wall contact to prevent seal
element extrusion.
Case-Carburized Slips
Slip-to-Casing Loading
info@CanuckCompletions.com 17
P E R M A N E N T PA C K E R S
PERMABORE PERMANENT PRODUCTION PACKER IMPERIAL SIZES
18 info@CanuckCompletions.com
P E R M A N E N T PA C K E R S
PERMABORE PERMANENT PRODUCTION PACKER METRIC SIZES
info@CanuckCompletions.com 19
P E R M A N E N T PA C K E R S
20 info@CanuckCompletions.com
P E R M A N E N T PA C K E R S
General Releasing Proceedure: does not shear out easily, then there is
a built in bumper sub in the retrieving
Retrieve the production string and tool. By bumping upward, either the
anchor latch form the packer. Run the support ring will shear or the shear ring
retrieving tool on a work string and in the retrieving tool will release. This is
apply set down force of approximately a safety release device, which will enable
2,000-3,000 lbs when the packer is the retrieving tool to be rotated free of
reached. The latch on the retrieving tool the packer if the packer will not release.
will engage with the top of the packer. If it is necessary to use the emergency
At this point, the releasing collet is release from the packer, pull tension
positioned directly below the support of approximately 2000-3000lbs and
ring of the packer. rotate to the right at least 8 turns at the
packer to release the retrieving tools
Pick-up at least 10,000lbs over string form the packer. The shear value of the
weight to part the shear screws in to release ring is adjustable and should
support ring and shift it upward thus be considered prior to running the
releasing the packer. If the support ring retrieving tool.
Note: Canuck Completions does not recommend the use of fishing or drilling jars in
the workstring when trying to retrieve the Canuck Retrievable Seal Bore Packer with
the retrieving tool.
Casing Packer
Size (In/ Weight Min ID Max ID Gauge Upper Lower Min ID Catalog
mm) (Lb/ft - (In/mm) (In/mm) Diameter Bore (In/ Bore (in/ Thru Seals Number
kg/m) (In/mm) mm) mm) (in/mm)
7 23-32 6.094 6.366 5.938 4.750 4.000 4.000 CW-280-
177.8 34.22- 154.8 161.7 150.8 120.7 101.6 101.6 74
47.61
7 5/8 20-29.7 6.875 7.125 6.688 4.750 4.000 4.000 CW-280-
193.7 29.76- 174.6 181.0 169.9 120.7 101.6 101.6 75
44.19
9 5/8 36-43.5 8.755 9.001 8.539 7.500 6.000 6.000 CW-280-
244.5 53.57- 222.4 228.6 216.9 190.5 152.4 152 97
64.73
info@CanuckCompletions.com 21
P E R M E N A N T PA C K E R S
Canuck ELB Seal Bore The ELB series is available in 10K pressure
Packer rating, with special higher pressure
ratings upon request.
The Canuck ELB (Extra Large Bore)
Permenant Seal Bore Production Packer Features:
provides a two step seal bore to allow for • Extra large upper seal bore for maxi-
maximum ID through both the packer mum ID through seals
and the seals. The tool incorporates
a standard sized lower bore for high- • Electric line set, hydraulic set or
pressure service. The extended upper mechanical set
seal bore provides a sealing point for an • Components keyed for milling
extra large set of seals. The seals can be • Anti-extrusion rings to expand to
latched or landed into the upper bore, casing I.D. to prevent rubber extru-
depending upon tubing movement sion
requirements.
• Full circle slips allow for fast run time
The ELB Packer is available with a
complete line of tubing seal accessories
and elastomers.
22 info@CanuckCompletions.com
P E R M E N A N T PA C K E R S
CANUCK ELB SEAL BORE PACKER SELECTION CHART
Casing Packer
Max OD of Lower Bore Upper Bore Min ID Thru
Size (mm) Weight Range (kg/m)
Tool (mm) (mm) (mm) Seals (mm)
17.11 19.35 107.95
127.0 68.28 76.20 49.2
22.32 31.25 100.78
19.34 25.30 115.90
68.28 82.55 61.90
29.76 34.22 112.70
139.7
19.34 25.30 115.90
76.20 92.08 76.20
29.76 34.22 112.70
25.30 34.22 152.40
34.22 47.62 147.65 82.55 101.6 75.82
47.62 56.54 138.89
177.8
25.30 34.22 152.40
34.22 47.62 147.65 101 .60 120.65 73.03
47.62 56.54 138.89
35.71 50.15 165.10
193.7 101.60 120.65 73.03
50.15 58.03 158.75
244.5 53.57 79.61 206.38 152.4 190.50 152.4
Casing Packer
Max OD of Lower Bore Upper Bore Min ID Thru
Size (in) Weight Range (lb/ft)
Tool (in) (in) (in) Seals (in)
11.5 13 4.25
5 2.688 3.00 1.938
15 21 3.968
13 17 4.563
2.688 3.25 2.437
20 23 4.437
51 /2
13 17 4.563
3.00 3.625 3.00
20 23 4.437
17 23 6.000
23 32 5.813 3.25 4.00 2.98
32 38 5.468
7
17 23 6.000
23 32 5.813 4.00 4.75 2.875
32 38 5.468
24 33.7 6.500
75/8 4.00 4.75 2.875
33.7 39 6.250
9-5/8 36 53.5 8.125 6.00 7.50 6.00
info@CanuckCompletions.com 23
P E R M E N A N T PA C K E R S
24 info@CanuckCompletions.com
P E R M E N A N T PA C K E R S
CANUCK CONTINUOUS SEAL BORE PACKER SELECTION CHART
Casing
Min Bore Thru
Max OD of Tool Packer Bore (in)
Size (in) Weight Range (lb/ft) Seals (in)
(in)
4 1/2 9.5 13.5 3.750 2.688 1.94
11.5 13 4.250 2.688 1.94
5
15 21 3.968 2.688 1.94
13 17 4.563 2.688 1.94
17 23 4.437 2.688 1.94
5 1/2
13 17 4.563 3.000 2.38
17 23 4.437 3.000 2.38
17 23 6.000 3.250 2.38
23 32 5.813 3.250 2.38
32 38 5.468 3.250 2.38
7
17 23 6.000 4.000 3.00
23 32 5.813 4.000 3.00
32 38 5.468 4.000 3.00
24 33.7 6.500 3.250 2.38
33.7 39 6.250 3.250 2.38
7 5/8
24 33.7 6.500 4.000 3.00
33.7 39 6.250 4.000 3.00
24 36 7.500 4.000 3.00
8-5/8
36 49 7.125 4.000 3.00
36 53.5 8.125 3.250 2.38
36 53.5 8.125 4.000 3.00
9 5/8
36 53.5 8 .1 25 4.750 3.50
36 53.5 8.125 6.000 4.75
info@CanuckCompletions.com 25
P E R M E N A N T PA C K E R S
CANUCK CONTINUOUS SEAL BORE PACKER SELECTION CHART
Casing
Packer Bore Min Bore Thru
Max OD of Tool
Size (mm) Weight Range (kg/m) (mm) Seals (mm)
(mm)
114.3 14.14 20.09 95.25 68.28 49.23
17.11 19.35 107.95 68.28 49.23
127.0
22.32 31.25 100.78 68.28 49.23
19.34 25.30 115.90 68.28 49.23
25.30 34.22 112.70 68.28 49.23
139.7
19.34 25.30 115.90 76.20 60.33
25.30 34.22 112.70 76.20 60 .33
25.30 34 .22 152.40 82.55 60.33
34.22 47.62 147.65 82.55 60.33
47.62 56.54 138.89 82.55 60.33
177.8
25.30 34.22 152.40 101 .60 76.20
34.22 47.62 147.65 101 .60 76 .20
47.62 56.54 138.89 101 .60 76.20
35.71 50.15 165.10 82.55 60.33
50.15 58.03 158.75 82.55 60.33
193.7
35.71 50.15 165.10 101 .60 76.20
50.15 58.03 158.75 101 .60 76 .20
35.71 53.57 190.50 101.60 76 .20
219.1
53.57 72.91 180.97 101 .60 76.20
53.57 79.61 206.38 82.55 60.33
53.57 79.61 206.38 101 .60 76.20
244.5
53.57 79.61 206.38 120.65 88 .90
53.57 79.61 206.38 152.40 120.65
26 info@CanuckCompletions.com
P E R M E N A N T PA C K E R S
info@CanuckCompletions.com 27
P E R M E N A N T PA C K E R S
CANUCK SEVERE SERVICE (HPHT) SEAL BORE PACKER SELECTION CHART
Casing
Packer Bore Min Bore Thru
Max OD of Tool
Size (mm) Weight Range (kg/m) (mm) Seals (mm)
(mm)
114.3 14.14 20.09 95.25 68 .28 49.23
17.11 19.35 107.95 68.28 49.23
127.0
22 .32 31 .25 100.78 68.28 49.23
19.34 25.30 115.90 68 .28 49.23
25 .30 34.22 112.70 68 .28 49.23
139.7
19.34 25.30 115.90 76.20 60.33
25.30 34.22 112.70 76.20 60.33
25.30 34.22 152.40 82.55 60.33
34.22 47.62 147.65 82.55 60 .33
47.62 56 .54 138.89 82.55 60.33
177.8
25.30 34.22 152.40 101 .60 76.20
34.22 47.62 147.65 101.60 76.20
47.62 56 .54 138.89 101 .60 76.20
35.71 50 .15 165.10 82.55 60.33
50 .15 58.03 158.75 82 .55 60.33
193.7
35.71 50.15 165.10 101.60 76.20
50.15 58 .03 158.75 101 .60 76.20
35.71 53.57 190.50 101 .6 76.20
219.1
53.57 72.91 180.97 101.6 76.20
53.57 79.61 206.38 82.55 60 .33
53.57 79.61 206.38 101 .60 76.20
244.5
53 .57 79.61 206.38 120.65 88.90
53 .57 79.61 206.38 152.40 120.65
28 info@CanuckCompletions.com
P E R M E N A N T PA C K E R S
CANUCK SEVERE SERVICE (HPHT) SEAL BORE PACKER SELECTION CHART
Casing
Min Bore Thru
Max OD of Tool Packer Bore (in)
Size (in) Weight Range (lb/ft) Seals (in)
(in)
41/2 9.5 13.5 3.750 2.688 1.94
11 .5 13 4.250 2.688 1.94
5
15 21 3.968 2.688 1.94
13 17 4.563 2.688 1.94
17 23 4.437 2.688 1.94
51 /2
13 17 4.563 3.000 2.38
17 23 4.437 3.000 2.38
17 23 6.000 3.250 2.38
23 32 5.813 3.250 2.38
32 38 5.468 3.250 2.38
7
17 23 6.000 4.000 3.00
23 32 5.813 4.000 3.00
32 38 5.468 4.000 3.00
24 33 .7 6.500 3.250 2.38
33.7 39 6.250 3.250 2.38
7 5/8
24 33.7 6.500 4.000 3.00
33.7 39 6.250 4.000 3.00
24 36 7.500 4.000 3.00
8-5/8
36 49 7.125 4.000 3.00
36 53.5 8.125 3.250 2.38
36 53.5 8.125 4.000 3.00
9 5/8
36 53.5 8.125 4.750 3.50
36 53.5 8.125 6.000 4.75
info@CanuckCompletions.com 29
P E R M E N A N T PA C K E R S
30 info@CanuckCompletions.com
P E R M E N A N T PA C K E R S
CANUCK RETRIEVABLE PACKER BORE SELECTION CHART
Casing
Min Bore Thru Seals
Max OD of Tool (in)
Size (in) Weight Range (lb/ft) (in)
Casing
Max OD of Tool Min Bore Thru Seals
Size (mm) Weight Range (kg/m) (mm) (mm)
info@CanuckCompletions.com 31
P E R M E N A N T PA C K E R A C C E S S O R I E S
32 info@CanuckCompletions.com
P E R M A N E N T PA C K E R A C C E S S O R I E S
info@CanuckCompletions.com 33
BRIDGE PLUGS
The 10K Cast Iron Bridge Plug is designed Always spot sand or cement on top
for speed and safety while running on of bridge plug before continuing
wireline, and for strength and durability operations up hole.
after setting. High performance and
Features
reliability are not compromised in any
way. • Compact for ease in running wire-
line set.
Features
• Slips securely set in hardness
• Compact for ease in running wire- through P-110.
10K Cast Iron Bridge Plug
line set.
• One piece slips eliminates prema-
• Slips securely set in hardness ture setting.
through P-110.
• Pressure rated to 5,000 psi (34,475
• One piece slips eliminates prema- kPa) at 250oF (121oC).
ture setting.
• Packing element one piece design.
• Pressure rated to 10,000psi (68 950
• Drillable cast iron, open body con-
kPa) at 400oF (204 oC)
struction with a release ring for easy
• Drillable cast iron, open body con- drill-out.
struction.
• Ratchet ring holds plug in set posi-
tion.
34 info@CanuckCompletions.com
BRIDGE PLUGS
10K & 5K CAST IRON BRIDGE PLUG SIZING CHARTS
Weight
Casing Plug Setting Range (mm) Set
Range
(mm) (lbs/ft) (mm) Min Max (lbs)
60.3 5.95-8.62 44.45 45.21 52.68 9,000'
73 9.52-9.67 56.39 59.44 64.14 9,000'
88.9 8.55-15.32 69.85 72.82 82.75 9.000'
88.9 19.04-23.50 61 .72 64.72 70.21 9,000·
101 .6 8.33-20.82 79.76 84.84 94.79 20,000
114.3 14.14-22.47 90.47 97.18 103.89 33,000
127 17.11-30.94 100 105.51 115.82 33,000
139.7 19.34-34.22 109.52 116.33 128.12 33,000
146.1 20.82-37.49 119.35 124.21 134.37 33,000
168.3 25.30-47.62 136.53 142.11 155.83 50,000
177.8 25.30-52.08 144.45 152.4 166.07 50,000
193.7 29.75-58.03 160.32 168.28 180.98 50,000
219.1 35.70-72.91 180.98 185.67 205.66 50,000
Weight
Casing Plug Setting Range (in)
Range Set (lbs)
(in) (lbs/ft) (in) Min. Max
23/8 4.0-5.8 1.750 1.78 2.074 9,000'
27/8 6.4-6.5 2.220 2.34 2.525 9,000'
31/2 5.75-10.3 2.750 2.867 3.258 9.000'
31/2 12.8-15.8 2.430 2.548 2.764 9,000·
4 5.6-14.0 3.140 3.340 3.732 20,000
41/2 9.5-15.1 3.562 3.826 4.09 33,000
5 11.5-20.8 3.937 4.154 4.56 33,000
51/2 13.0-23.0 4.312 4 .580 5.044 33,000
53/4 14.0-25.2 4.699 4.890 5.29 33,000
65/8 17.0-32.0 5.375 5.595 6.135 50.000
7 17.0-35.0 5.687 6.000 6.538 50,000
75/8 20.0-39.0 6.312 6.625 7.125 50,000
85/8 24.0-49.0 7.125 7.310 8.097 50,000
info@CanuckCompletions.com 35
BRIDGE PLUGS
36 info@CanuckCompletions.com
BRIDGE PLUGS
COMPOSITE BRIDGE PLUG SIZING CHART
PART NUMBER
Bridge LOW LOW
(“X” DENOTES Bridge MID TEMP HI Temp.
CASING CASING Temp. & Temp. &
PRESSURE AND Plug Plug & MID PSI. & HI PSI. Setting Tool
O.D. WEIGHT LOW PSI. HIGH PSI.
TEMP OF PLUG OD NITRILE BLUE
Length GREY YELLOW
G,Y,N, OR B)
05.CBPA.238.175X 2 3/8” 4.7 1.75 14.25 300° / 10K 400° / 10K GO
05.CBPA.278.220X 2 7/8” 6.5 2.2 14.25 250° / 10K 300° / 10K 400° / 10K BK #5 or GO
05.CBPA.27H.215X 2 7/8” 7.9 2.15 14.25 250° / 10K 300° / 10K 400° / 10K BK #5 or GO
05.CBPA.31L.283X 3 ½”LW 7.7 2.725 14.25 250° / 10K 300° / 10K 400° / 10K BK #5 or GO
05.CBPA.312.272X 3 ½” 9.3-10.2 2.725 14.25 250° / 10K 300° / 10K 400° / 10K BK #5 or GO
05.CBPA.31H.250X 3 ½”HW 12.95 2.5 14.25 250° / 10K 300° / 10K 400° / 10K BK #5 or GO
05.CBPA.400.319X 4” 9.5-11 3.188 14.25 250° / 8K 250° / 10K 300° / 10K 400° / 10K BK #10 or GO
05.CBPA.412.360X 4 ½” 9.5-15.1 3.6 14.25 250° / 8K 250° / 10K 300° / 10K 400° / 10K BK #10 or GO
05.CBPA.412.360X 4 ½”HW 13.5-15.1 3.44 14.25 250° / 8K 250° / 10K 300° / 10K 400° / 10K BK #10 or GO
05.CBPA.41C.337X 4 ½”HW 18.8 3.375 14.25 250° / 8K 250° / 10K 300° / 10K 400° / 10K BK #10
05.CBPA.500.400X 5” 11.5-18 3.92 14.25 250° / 8K 250° / 10K 300° / 10K 400° / 10K BK #10 or GO
05.CBPA.512.440X 5 ½” 15.5-23 4.4 20.75 250° / 8K 250° / 10K 300° / 10K 400° / 10K BK #20 or GO
05.CBPA.51H.430X 5 ½” 20-26 4.3 20.75 250° / 8K 250° / 10K 300° / 10K 400° / 10K BK #20 or GO
05.CBPA.51H.460X 5 ½” 14-17 4.6 20.75 250° / 8K 250° / 10K 300° / 10K 400° / 10K BK #20 or GO
05.CBPA.700.575X 7” 20-32 5.75 26.34 250° / 8K 250° / 10K 300° / 10K 400° / 10K BK #20 or GO
05.CBPA.70L.595X 7”LW 17-20 5.75 26.34 250° / 8K 250° / 10K 300° / 10K 400° / 10K BK #20 or GO
05.CBPA.758.625X 7 5/8” 24-33.7 6.25 26.75 250° / 8K 250° / 10K 300° / 10K 400° / 10K BK #20 or GO
05.CBPA.858.725Y 8 5/8” 36-44 7.25 32 250° / 8K BK #20 or GO
05.CBPA.958.838Y 9 5/8” 32.3-47 8.375 32 250° / 8K BK #20 or GO
info@CanuckCompletions.com 37
BRIDGE PLUGS
The HM-1 permanent cast iron • One setting tool sets plugs for 4
bridge plug is designed to set with a ½-in. through 5 ½-in. casing by
combination of hydraulic pressure and changing setting sleeves
mechanical pull. • Sets with a combination of hydraulic
pressure and mechanical pull
The HM-1 bridge plug requires a setting
tool. It’s special setting tool is full bore • Excellent for use in deviated applica-
and allows for cement to be dumped tions
on the plug without round tripping • Available in high pressure and low
making this a one step tool in shallow pressure on most sizes.
applications.
Applications:
Features:
• Well abandonment
• Field-proven design
• Temporary and permanent zonal
• Constructed of drillable materials isolation
• Right-hand rotation releases setting • Squeeze cementing
tool fromplug
• Fracturing
• One-piece slips.
• Deviated wellbores
38 info@CanuckCompletions.com
BRIDGE PLUGS
HM-1 BRIDGE PLUG SELECTION CHART
Casing Casing Casing Plug Minimum Maxi- Surface Mini- Maxi- Product No.*
OD Weight Weight OD Setting mum Pressure mum mum
(kg/m) (kg/m) Range Setting Pull Pull
Range Force Force
(mm) Min Max (mm) (mm) (mm) Kpa daN daN
114.30 14.14 24.70 3.562 97.18 103.89 10,342 12,455 13,345 450HM1-5
14.14 22.47 3.562 97.18 103.89 10,342 12,455 13,345 4450HM1-10
127.00 17.11 30.95 3.937 105.51 115.82 10,342 12,455 13,345 550HM1-10
139.70 19.35 34.23 4.312 116.33 128.12 10,342 12,455 13,345 550HM1-5
19.35 34.23 4.312 116.33 128.12 10,342 12,455 13,345 550HM1-10
146.05 20.83 37.50 4.699 124.21 134.37 10,342 13,345 14,679 575HM1-10
168.28 25.30 46.13 5.375 142.11 155.83 10,342 20,017 22,241 658HM1-10
177.80 25.30 52.09 5.687 152.40 166.07 10,342 20,017 22,241 700HM1-5
25.30 52.09 5.687 152.40 166.07 10,342 20,017 22,241 700HM1-10
193.68 29.76 58.04 6.312 168.28 180.98 10,342 20,017 22,241 758HM1-10
219.08 35.72 72.92 7.125 185.67 205.66 10,342 20,017 22,241 858HM1-10
244.48 43.60 86.91 8.175 214.25 230.20 10,342 20,017 22,241 958HM1-8
273.05 48.66 90.33 9.437 245.36 258.88 10,342 20,017 22,241 1075HM1-5
298.45 56.55 89.29 10.437 273.61 283.21 10,342 20,017 22,241 1175HM1-5
89.29 123.52 9.937 258.88 273.61 10,342 20,017 22,241 1176HM1-5
339.73 71.43 125.75 11.88 309.25 309.25 10,342 20,017 22,241 1338HM1-3
406.40 96.73 175.60 14.125 370.23 387.35 13,790 20,017 22,241 1600HM1-2
508.00 139.89 197.93 18.375 475.74 485.75 13,790 20,017 22,241 2000HM1-2
info@CanuckCompletions.com 39
BRIDGE PLUGS
HM-1 BRIDGE PLUG SELECTION CHART
Casing Casing Casing Plug Minimum Maxi- Surface Mini- Maxi- Product No.*
OD Weight Weight OD Setting mum Pressure mum mum
(lb/ft) (lb/ft) Range Setting Pull Pull
Range Force Force
(in) Min Max (in) (in) (in) PSI Lbs Lbs
4 1/2 9.5 16.6 3.562 3.826 4.09 1,500 28,000 30,000 450HM1-5
9.5 15.1 3.562 3.826 4.09 1,500 28,000 30,000 4450HM1-10
5 11.5 20.8 3.937 4.154 4.56 1,500 28,000 30,000 550HM1-10
5 1/2 13 23 4.312 4.58 5.044 1,500 28,000 30,000 550HM1-5
13 23 4.312 4.58 5.044 1,500 28,000 30,000 550HM1-10
5 3/4 14 25.2 4.699 4.89 5.29 1,500 30,000 33,000 575HM1-10
6 5/8 17 31 5.375 5.595 6.135 1,500 45,000 50,000 658HM1-10
7 17 35 5.687 6 6.538 1,500 45,000 50,000 700HM1-5
17 35 5.687 6 6.538 1,500 45,000 50,000 700HM1-10
7 5/8 20 39 6.312 6.625 7.125 1,500 45,000 50,000 758HM1-10
8 5/8 24 49 7.125 7.31 8.097 1,500 45,000 50,000 858HM1-10
9 5/8 29.3 58.4 8.175 8.435 9.063 1,500 45,000 50,000 958HM1-8
10 3/4 32.7 60.7 9.437 9.66 10.192 1,500 45,000 50,000 1075HM1-5
11 3/4 38 60 10.437 10.772 11.15 1,500 45,000 50,000 1175HM1-5
60 83 9.937 10.192 10.772 1,500 45,000 50,000 1176HM1-5
13 3/8 48 84.5 11.88 12.175 12.175 1,500 45,000 50,000 1338HM1-3
16 65 118 14.125 14.576 15.25 2,000 45,000 50,000 1600HM1-2
20 94 133 18.375 18.73 19.124 2,000 45,000 50,000 2000HM1-2
40 info@CanuckCompletions.com
BRIDGE PLUGS
Features: Applications:
• One-piece slips
info@CanuckCompletions.com 41
BRIDGE PLUGS
HM-2 BRIDGE PLUG SELECTION CHART
Casing Casing Casing Plug Minimum Maxi- Surface Mini- Maxi- Product No.*
OD Weight Weight OD Setting mum Pressure mum mum
(kg/m) (kg/m) Range Setting Pull Pull
Range Force Force
(mm) Min Max (mm) (mm) (mm) Kpa daN daN
114.30 14.14 24.70 3.562 97.18 103.89 10,342 12,455 13,345 450HM2-5
14.14 22.47 3.562 97.18 103.89 10,342 12,455 13,345 4450HM2-10
127.00 17.11 30.95 3.937 105.51 115.82 10,342 12,455 13,345 550HM2-10
139.70 19.35 34.23 4.312 116.33 128.12 10,342 12,455 13,345 550HM2-5
19.35 34.23 4.312 116.33 128.12 10,342 12,455 13,345 550HM2-10
146.05 20.83 37.50 4.699 124.21 134.37 10,342 13,345 14,679 575HM2-10
168.28 25.30 46.13 5.375 142.11 155.83 10,342 20,017 22,241 658HM2-10
177.80 25.30 52.09 5.687 152.40 166.07 10,342 20,017 22,241 700HM2-5
25.30 52.09 5.687 152.40 166.07 10,342 20,017 22,241 700HM2-10
193.68 29.76 58.04 6.312 168.28 180.98 10,342 20,017 22,241 758HM2-10
219.08 35.72 72.92 7.125 185.67 205.66 10,342 20,017 22,241 858HM2-10
244.48 43.60 86.91 8.175 214.25 230.20 10,342 20,017 22,241 958HM2-8
273.05 48.66 90.33 9.437 245.36 258.88 10,342 20,017 22,241 1075HM2-5
298.45 56.55 89.29 10.437 273.61 283.21 10,342 20,017 22,241 1175HM2-5
89.29 123.52 9.937 258.88 273.61 10,342 20,017 22,241 1176HM2-5
339.73 71.43 125.75 11.88 309.25 309.25 10,342 20,017 22,241 1338HM2-3
406.40 96.73 175.60 14.125 370.23 387.35 13,790 20,017 22,241 1600HM2-2
508.00 139.89 197.93 18.375 475.74 485.75 13,790 20,017 22,241 2000HM2-2
42 info@CanuckCompletions.com
BRIDGE PLUGS
HM-2 BRIDGE PLUG SELECTION CHART
Casing Casing Casing Plug Minimum Maxi- Surface Mini- Maxi- Product No.*
OD Weight Weight OD Setting mum Pressure mum mum
(lb/ft) (lb/ft) Range Setting Pull Pull
Range Force Force
(in) Min Max (in) (in) (in) PSI Lbs Lbs
4 1/2 9.5 16.6 3.562 3.826 4.09 1,500 28,000 30,000 450HM2-5
9.5 15.1 3.562 3.826 4.09 1,500 28,000 30,000 4450HM2-10
5 11.5 20.8 3.937 4.154 4.56 1,500 28,000 30,000 550HM2-10
5 1/2 13 23 4.312 4.58 5.044 1,500 28,000 30,000 550HM2-5
13 23 4.312 4.58 5.044 1,500 28,000 30,000 550HM2-10
5 3/4 14 25.2 4.699 4.89 5.29 1,500 30,000 33,000 575HM2-10
6 5/8 17 31 5.375 5.595 6.135 1,500 45,000 50,000 658HM2-10
7 17 35 5.687 6 6.538 1,500 45,000 50,000 700HM2-5
17 35 5.687 6 6.538 1,500 45,000 50,000 700HM2-10
7 5/8 20 39 6.312 6.625 7.125 1,500 45,000 50,000 758HM2-10
8 5/8 24 49 7.125 7.31 8.097 1,500 45,000 50,000 858HM2-10
9 5/8 29.3 58.4 8.175 8.435 9.063 1,500 45,000 50,000 958HM2-8
10 3/4 32.7 60.7 9.437 9.66 10.192 1,500 45,000 50,000 1075HM2-5
11 3/4 38 60 10.437 10.772 11.15 1,500 45,000 50,000 1175HM2-5
60 83 9.937 10.192 10.772 1,500 45,000 50,000 1176HM2-5
13 3/8 48 84.5 11.88 12.175 12.175 1,500 45,000 50,000 1338HM2-3
16 65 118 14.125 14.576 15.25 2,000 45,000 50,000 1600HM2-2
20 94 133 18.375 18.73 19.124 2,000 45,000 50,000 2000HM2-2
info@CanuckCompletions.com 43
R E T R I E VA B L E B R I D G E P LU G
The “CWR” combines the advantages of The “CWR” is connected to the wireline
wireline setting with easy and reliable (or hydraulic) setting tool, run to
retrievability. It is commonly used for required setting depth and set.
zone or well isolation during fracturing,
The “CWR” retrieving tool is used to
acidizing, cement squeezing, testing or
retrieve the bridge plug. When using
well head repair operations.
the tool on endless tubing, a safety sub
This Bridge Plug may be run and set on must be used in conjunction with the
wireline using a Baker Wireline Pressure retrieving head.
Setting Assembly. It may also be run
The retrieving tool is lowered onto the
on tubing or endless tubing using a
bridge plug while circulating any sand or
hydraulic setting tool.
other debris off the plug. The retrieving
Features: head will open the valve, allowing
any pressure differential to equalize.
• Double acting slips securely anchor Continued downward movement will
the bridge plug against pressure dif- latch the retrieving head onto the bridge
ferentials from above or below. plug - upward motion releases the plug.
• Three element pack off design
The retrieving head may be
ensures reliable sealing at high pres-
disconnected from the bridge plug
sures and temperatures.
if necessary with approximately 8 to
• Unique equalizing valve design al- 10 turns of right hand rotation while
lows any pressure differential to be holding a slight amount of tension.
equalized before the retrieving head
is latched onto the plug.
• Differential pressure rating of 10,000
psi (68 950 kPa)..
• Straight on and straight pull to
release.
44 info@CanuckCompletions.com
R E T R I E VA B L E B R I D G E P LU G
CANUCK “CWR” BRIDGE PLUG TECHNICAL DATA
info@CanuckCompletions.com 45
R E T R I E VA B L E B R I D G E P LU G S
46 info@CanuckCompletions.com
R E T R I E VA B L E B R I D G E P LU G S
C-TS 10K RETRIEVABLE BRIDGE PLUG
Casing
Tool OD
O.D. Weight
(in) (mm) Range (lbs/ft) Range (kg/m) (in) (mm)
4 1/2 114.3 15.6 16.6 23.21 24 .70 3.625 92.08
4 1/2 114.3 9.5 13.5 14.14 20 .09 3.750 95.25
5 1/2 139.7 20 23 29.76 34 .22 4.500 114.30
5 1/2 139.7 13 20 19.34 29.76 4.625 117.48
7 177.8 20 26 29.76 38.69 5.969 151 .61
7 5/8 193.7 24 29.7 35.71 44.19 6.672 169.47
info@CanuckCompletions.com 47
C E M E N T R E TA I N E R S
48 info@CanuckCompletions.com
C E M E N T R E TA I N E R S
MODEL CCR CEMENT RETAINER
info@CanuckCompletions.com 49
C E M E N T R E TA I N E R S
50 info@CanuckCompletions.com
C E M E N T R E TA I N E R S
MODEL CMS CEMENT RETAINER
info@CanuckCompletions.com 51
O P E N H O L E PA C K E R S
52 info@CanuckCompletions.com
O P E N H O L E PA C K E R S
info@CanuckCompletions.com 53
CANUCK OPEN HOLE STRADDLE SYSTEM
CANUCK OPEN HOLE STRADDLE SYSTEM
Introduction Applications
The Canuck Open Hole Straddle System Testing
is designed for treating, testing, or
Canuck Open Hole Straddle System may
injecting of single or multiple intervals
be used for testing zones in open hole
in a well-bore without the requirement
or in casing. Zones may be isolated to
of tripping between operations. The
determine oil, gas, or water production
Canuck Open Hole Straddle System
from certain sections. Testing of each
Packer system is used for isolating zones
zone will determine which fluid is
in open-hole or in casing. This tool
produced from that section. Also, testing
is designed for long-term downhole
will determine flow rates the zone.
production or injection applications,
Electronic
or short term stimulation. The Canuck
Open Hole Straddle Packer system Pressure-Temperature Recorders as well
may be used in vertical, deviated, as Shut-In Tools, may be used with the
or horizontal wells. No rotation is system to provide additional subsurface
required to set the packer or release data from zones being tested.
the packer. Full bore capabilities
permit maximum pumping rates with Treating
reduced horsepower requirements.
The system may be used for treating
Inflatable packers elements for these zones in open hole or in casing. Typical
tools come with an internal bladder treatments performed through the tool
for extra protection from rupturing. would be fracturing, acidizing, polymer
High strength aircraft cable is used to injection for water shut-off.
provide good expansion characteristics
Injection
in washed out or irregular well bores.
Canuck Cross Weave Cable reinforcement The Canuck Open Hole Straddle System
allows these inflatable packer elements Packer system may be used for injection
to return very close to the original of fluids in disposal wells. A large internal
run-in diameter while providing high bore is provided through the tool. For
differential pressure capabilities. The long term disposal applications it is
Packer elements are designed in such a very important that materials used in
way that bulging due to high differential manufacturing these tools, are able to
pressure is less likely to occur. Due to resist highly corrosive environments
superior bonding between the cable and typically associated with disposal wells.
rubber these elements lose less rubber
down hole. For treating applications, a circulating
valve is used above the tool. This valve
54 info@CanuckCompletions.com
CANUCK OPEN HOLE STRADDLE SYSTEM
During the inflation sequence a reset Once testing or treating has been finished
dart or ball is launched from surface weight is picked up off the string to
and pumped onto the seat. Fluid is then begin the deflation sequence. The packer
blocked to the annulus and through the element inflation channels and annulus
packer I.D. Fluid is then diverted through ports are opened allowing the packer to
concentric passages to the inflation equalize and deflate close to its original
channels of the packer element. It is then run-in diameter. The tool is now back to its
permissible to increase pressure in even original run-in position ready to be moved
increments allowing the packer element to another interval. Additional darts
to fully inflate properly. Once the desired may be pumped from surface providing
differential pressure is reached within the multiple setting in one trip into the well.
element pressure must be held for 10
minutes to allow the packer element to
fully square off.
info@CanuckCompletions.com 55
CANUCK OPEN HOLE STRADDLE SYSTEM
56 info@CanuckCompletions.com
CANUCK OPEN HOLE STRADDLE SYSTEM
info@CanuckCompletions.com 57
T H R U T U B I N G R E S E T TA B L E I N F L AT E S Y S T E M
58 info@CanuckCompletions.com
T H R U T U B I N G R E S E T TA B L E I N F L AT E S Y S T E M
info@CanuckCompletions.com 59
LINER HANGERS
60 info@CanuckCompletions.com
LINER HANGERS
Casing Product
Liner Max O.D.
Size Weight Number
Size (in) (in)
(in) (lbs/ft) MSC MDC Swivel
3.5 5.5 15-20 M94026155 M990880155 M96057135 4.5
20-23 6.116
4.5 7
23-26 M940261457 M9908801457 M96057145 5.934
29-32 5.844
20-23 6.116
5 7
23-26 M9402617 M99088017 M9605715 5.934
29-32 5.844
36-43.5 M9402619 M99088019 M9605717 8.4
7 9.625
43.5-53.5 8.25
48-54.5 M94026113 M99088913 M960579 11.875
9.625 13.375
68-72 11.75
info@CanuckCompletions.com 61
LINER HANGERS
62 info@CanuckCompletions.com
LINER HANGERS
Model HDC
info@CanuckCompletions.com 63
LINER HANGERS
Casing Product
Liner Max O.D.
Size Weight Number
Size (in) (in)
(in) (lbs/ft) HSC HDC HP
20-23 6.116
4.5 7 23-26 M96052145 M96058145 5.934
29-32 5.844
20-23 6.116
5.0 7.0 23-26 M9605215 M9605815 5.934
29-32 5.844
5.5 7.0 23-26 M31340155 5.934
7.0 8.63 32-36 M03134017 8.409
36-43.5 8.409
7.0 9.625 M9605217 M9605817
43.5-53.5 8.250
7.63 9.63 36-43.5 M96052176 M96058176 8.400
54.5-68.0 11.875
9.625 13.375 M960521796 M96058196
68-72 11.75
11.75 13.38 54.5-68.0 M03134019 12.063
64 info@CanuckCompletions.com
LINER HANGERS
info@CanuckCompletions.com 65
S E L E C T I V E A C I D T O O L A S S E M B LY
66 info@CanuckCompletions.com
PRODUCTION ACCESSORIES
info@CanuckCompletions.com 67
PRODUCTION ACCESSORIES
The Type ‘K’ Indexing Valve is a high • Equalizes Pressure Before Packer is
pressure mechanically operated valve Released
used to convert a double grip retrievable • Bonded Seals for Repeated Use
packer to a bridge plug. The Type K Under Pressure
Indexing Valve design allows pressure
• Safety Dogs Eliminate Accidental
to equalize above and below before the
Separation
packer is released. The running retrieving
tool is locked to the valve eliminating • Auto Jay Retrieving Tool for Easy
accidental separation. Connecting
• 10,000 PSI Pressure Rating
• Available in 2 3/8, 2 7/8 and 3 ½ EUE
Connection
68 info@CanuckCompletions.com
PRODUCTION ACCESSORIES
info@CanuckCompletions.com 69
PRODUCTION ACCESSORIES
70 info@CanuckCompletions.com
PRODUCTION ACCESSORIES
info@CanuckCompletions.com 71
PRODUCTION ACCESSORIES
72 info@CanuckCompletions.com
PRODUCTION ACCESSORIES
info@CanuckCompletions.com 73
PRODUCTION ACCESSORIES
74 info@CanuckCompletions.com
PRODUCTION ACCESSORIES
info@CanuckCompletions.com 75
PRODUCTION ACCESSORIES
The Casing Scraper is used to remove The Casing Scraper may be run on
scale, cement sheath, perforating burrs, tubing or drill pipe and operated equally
or any other foreign matter on the well when reciprocated vertically or
inside casing wall in order to provide a when rotated. Normally rotation is
smooth clean casing ID for running and not necessary unless restrictions are
setting packers and other sub-surface encountered. In areas where packers
equipment. or other tools are to be set, the scraper
should be reciprocated through a
Features: number of times to ensure the casing is
clean and smooth.
• One piece body with full 360oF
(182oC) casing ID coverage provided
by six spring loaded scraper blades.
• Large bypass areas around and be-
tween the blades for ease of circulat-
ing. Each blade is secured in its own
individual pocket and ensures that
all thrust and rotational forces are
absorbed directly by the one piece
body.
• No special tools other than a pipe
vise are required to change the
blades or springs.
• Leaf type incoloy springs behind
each self-sharpening blade, provid-
ing maximum usage before repairs
or replacement in necessary.
• API regular pin up and box down are
normally supplied with the casing
scraper, with other connections
available if required.
76 info@CanuckCompletions.com
PRODUCTION ACCESSORIES
CANUCK CASING SCRAPER
PRODUCT
CASING SIZE CASING WEIGHT BLADE OD THREAD
NUMBER
10-010-450 4 1/2" 6.75-16.60 PPF 4.42" 2 3/8" EUE
10-010-500 5" 8.00-21.00 PPF 4.80" 2 3/8" EUE
10-010-550 5 1/2” 9.00-23.00 PPF 5.28" 2 7/8" EUE
10-010-650 6 5/8" 12.00-34.00 PPF 6.34" 2-7/8" EUE
10-010-700 7" 13.00-40.00 PPF 6.72" 2 7/8" EUE
10-010-750 7 5/8” 20.00-45.00 PPF 7.26" 2 7/8" EUE
10-010-850 8 5/8” 20.00-49.00 PPF 8.41" 3 1/2" EUE
10-010-950 9 5/8” 32.20-58.00 PPF 9.29” 3 1/2" EUE
10-010-100 10 3/4” 32.75-65.70 PPF 10.53" 3 1/2" EUE
info@CanuckCompletions.com 77
PRODUCTION ACCESSORIES
78 info@CanuckCompletions.com
PRODUCTION ACCESSORIES
Blast Joint
info@CanuckCompletions.com 79
PRODUCTION ACCESSORIES
80 info@CanuckCompletions.com
PRODUCTION ACCESSORIES
info@CanuckCompletions.com 81
PRODUCTION ACCESSORIES
The Canuck HST Hydraulic Setting Tool • Sets packers in high-angle and hori-
is used to convey and set all wireline- zontal wells
set sealbore packers, bridge plugs • Allows packer assembly to be
and retianers on production tubing or pushed into place
coil tubing. The HST sets the packer
• Allows packer to be set on coil tub-
by applying surface pressure until the
ing
preset shear force is achieved. The HST
provides a bottom connection that • Sets all permanent and retriewble
accepts common wireline-type setting- sealbore packers
tool adapter kits. A stackable piston • Eliminates need to deploy wireline
arrangement allows variable setting unit.
pressure to be tailored to wellbore
Applications:
requirements.
• All wireline-set type sealbore packer
Features:
completions
• Heavy-duty construction for push- • Deviated and horizontal wells
ing tools into deviated or horizontal
• Large-casing packers
wells
• EUE tubing connections standard
• Accepts common wireline adapter
kits
• Automatic tubing string fill and
drain
• Adjustable start-to-set pressure
• Stackable piston arrangement to
adjust setting pressure
• HST allows circulation before packer
is set.
82 info@CanuckCompletions.com
PRODUCTION ACCESSOIRES
HYDRAULIC SETTING TOOL SPECIFICATION GUIDE
Standard Bottom
Product
Size (mm) Tool OD (mm) Thread Connection
Number
Connection Configuation
38.1 54.10 Blank 1.5” MT #5 Baker E-4 15HST-1001
38.1 54.10 Blank 1.5” MT 2-1/8” GO 15HST-1002
60.3 92.20 2-3/8” EUE #10 Baker E-4 23HST-1001
73.0 111.25 2-7/8” EUE #20 Baker E-4 27HST-1001
Standard Bottom
Product
Size (mm) Tool OD (mm) Thread Connection
Number
Connection Configuation
1-1/2 2.13 Blank 1.5” MT #5 Baker E-4 15HST-1001
1-1/2 2.13 Blank 1.5” MT 2-1/8” GO 15HST-1002
2-3/8 3.63 2-3/8” EUE #10 Baker E-4 23HST-1001
2-7/8 4.38 2-7/8” EUE #20 Baker E-4 27HST-1001
info@CanuckCompletions.com 83
COIL ACCESSORIES
Coil O.D. Tool O.D. Min. I.D.* Tool Length Max. Tensile
(mm) (mm) (mm) (mm) (lbs)
25.4 43.18 17.53 0.31 46,000
31.75 43.18 19.05 0.34 48,000
31.75 54.1 25.4 0.39 76,000
38.1 54.1 25.4 0.39 76,000
38.1 72.9 28.7 0.45 162,000
44.45 72.9 28.7 0.49 162,000
44.45 77.72 35.05 0.55 162,000
50.8 72.9 35.05 0.5 132,400
60.45 82.55 35.05 0.53 150,800
73.15 98.3 35.05 0.66 150,800
*Tools can be equipped with premium threads for a larger I.D.
84 info@CanuckCompletions.com
COIL ACCESSORIES
info@CanuckCompletions.com 85
C O I L PA C K E R S
The Model TI Packer is a compact, The Model TI Packer is run to the setting
economical, and rugged packer for depth, and the appropriate amount of
use in shallow production or injection tension is applied to set the packer. To
installations. It is ideally suited for release the packer simply apply more
applications where pressure differential tubing tension than the amount of
from below is expected. shears installed in the packer, or lower
tubing to re-jay the packer. If there is
This packer features an adjustable shear- any annulus hydrostatic differential the
type safety release system which is used packer may not release in this manner.
to release the packer. The shear release
system is located below the packing
element with standard factory-set
shears.
86 info@CanuckCompletions.com
C O I L PA C K E R S
To set the packer, simply apply air, • Suitable for multiple stacked packer
nitrogen or fl uid pressure to the tubing applications.
string until the specified differential
• Sets with pressurized air, nitrogen,
pressure at the tool is reached. The
or fl uid.
Mighty-Mite is equipped with either
a shear plug immediately below the • High tolerance for sandy well
packer or on the tail joint end. Shear conditions.
plugs are preset to apply the specified
pressure required to set the packer. • Can be redressed in the field.
info@CanuckCompletions.com 87
C O I L PA C K E R S
88 info@CanuckCompletions.com
MOBILE AND OFFSHORE WORKSHOP
x
60° 60°
30° 30°
x
0°
x 0°
x
30° 30°
60° 60°
info@CanuckCompletions.com 89
Main Office
Box 8964
12 Cuendet Ind. Way
Sylvan Lake, AB Canada
T4S 1S6
p. 403-887-9991
f. 403-887-9908
www.canuckcompletions.com
info@canuckcompletions.co