Professional Documents
Culture Documents
0030 X Blasting abrasive chemical analysis Tested in accordance with ASTM D516 method B and ASTM
D512 method A.
0020
0010
*** X
In process inspection & test requirement
Surface Preparation: a) Cleaning & Degreasing
Specification Details / Notes:
0020 X Surface Preparation: b) Abrasive B lasting Cleanliness And Profile Minimum requirement is SIS 05 59 00 Sa 3 quality (or SSPC
SP5).
0030 X Coating Application: a) Temperature And Dew Point Surface temperature shall be at least 3 deg C above the dew
point.
0030
0010
*** X
Final inspection & test requirements
Sampling Frequency For Testing
Specification Details / Notes:
Random sampling for NDT in accordance with table 1 of
09-SAMSS-107.
0020 X Dimensional Fit / Size of Fasteners to Governing Spec. The physical fit shall be a running fit as described in the
09-SAMSS-107.
0030 X Total Dry Film Thickness Shall be determined using properly calibrated (in accordance
with SSPC PA 2) eddy current type thickness gauge.
IR092100 Continued...
INSPECTION & TESTING REQUIREMENTS REVISION: 10/31/2016 CODE NUMBER: PAGE:
SAUDI ARAMCO FORM-175 REPLACES: 10/26/2011 IR092100 2 of 2
(1).VISUAL INSPECTION BY BUYER INSPECTION REPRESENTATIVE
(2) REVIEW AND VERIFICATION OF MATERIAL CERTIFICATES AND INSPECTION RECORDS
(3) SUBMISSION OF MANUFACTURING, INSPECTION AND QUALITY RECORDS
0050 X Adhesion Testing One fastener from each of two different bathes in a production
day.
0060 X Final Visual Inspection Manufacturer shall certify visual inspection per 09-SAMSS-107
requirements.
Notes:
(1) Refer detailed instruction sheet SA175 form IR000003 of inspection requirement for ideal use of this form .
End of IR092100