Professional Documents
Culture Documents
00 Za en
00 Za en
A ~70 100
B
10
~177
ø48
43
max. 320
"X"
140
226
ø14
43
142
“Y”
230
C "X" = tensioning course on the spindle should be 70 mm min.
450 D 450
"Y" = Spindle distance should be as short as possible
This drawing is the confidential property of HOSCH Fördertechnik (SA) (Pty) Ltd. and may not be disclosed, reproduced or copied, either wholly
or in part, without the written permission of HOSCH Fördertechnik (SA) (Pty) Ltd., all rights in respect of patents, designs and copyright are reserved.
10 10
43
"X"
4 * 35 = 140
~177
~177
min. 200
226
43
"X"
max. 320
4 * 35 = 140
43
226
©2010 HOSCH Fördertechnik (SA) (Pty) Ltd.
142
43
230
142
230
The illustrations show a scraper in untensioned position. "X" = tensioning course on the spindle should be 70 mm min.
This drawing is the confidential property of HOSCH Fördertechnik (SA) (Pty) Ltd. and may not be disclosed, reproduced or copied, either wholly
or in part, without the written permission of HOSCH Fördertechnik (SA) (Pty) Ltd., all rights in respect of patents, designs and copyright are reserved.
100
40
40
105
Endsection
Offset
Assembly carrier
10
40
©2010 HOSCH Fördertechnik (SA) (Pty) Ltd.
40
10
This drawing is the confidential property of HOSCH Fördertechnik (SA) (Pty) Ltd. and may not be disclosed, reproduced or copied, either wholly
or in part, without the written permission of HOSCH Fördertechnik (SA) (Pty) Ltd., all rights in respect of patents, designs and copyright are reserved.
A
B ~70 100
70
"X"
~175
ø48
43 4 * 35 43
max. 320
226
ø14
82
“Y”
170
38
width width length mid section length
88
ø14
170
©2010 HOSCH Fördertechnik (SA) (Pty) Ltd.
This drawing is the confidential property of HOSCH Fördertechnik (SA) (Pty) Ltd. and may not be disclosed, reproduced or copied, either wholly
or in part, without the written permission of HOSCH Fördertechnik (SA) (Pty) Ltd., all rights in respect of patents, designs and copyright are reserved.
A ~70 100
B
10
~177
min. 135
"X"
350
81 68 213 92
“Y”
10 10
"X"
max. 275
~177
~177
min. 135
"X"
213 92
©2010 HOSCH Fördertechnik (SA) (Pty) Ltd.
213 92
1
This drawing is the confidential property of HOSCH Fördertechnik (SA) (Pty) Ltd. and may not be disclosed, reproduced or copied, either wholly Parallel elasto-mount
or in part, without the written permission of HOSCH Fördertechnik (SA) (Pty) Ltd., all rights in respect of patents, designs and copyright are reserved.
10 10
"X"
~177
~177
"X"
min. 105
max. 245 213 92
©2010 HOSCH Fördertechnik (SA) (Pty) Ltd.
213 92
1
This drawing is the confidential property of HOSCH Fördertechnik (SA) (Pty) Ltd. and may not be disclosed, reproduced or copied, either wholly Parallel elasto-mount
or in part, without the written permission of HOSCH Fördertechnik (SA) (Pty) Ltd., all rights in respect of patents, designs and copyright are reserved.