To Study the Measurement of Pressure (Non electrical quantity)
LEARNING OBJECTIVES:-
To measure the Pressure applied in terms of voltage.
APPARATUS:
1. Bellows. 2. Pressure indicator. 3. Digital Multimeter.
THEORY:
(To be written by students)
CIRCUIT DIAGRAM:
(Diagrams of bellow and Bourdon tube to be drawn by students)
PROCEDURE:
1. First adjust +12V & -12V supply.
2. Then apply pressure on the bellows till it reaches to psi & adjust voltage to 1V. 3. Slowly reduce the pressure by step 2 psi & note down corresponding voltage. 4. Reduce pressure till it becomes zero. 5. Repeat procedure for accurate readings. OBSERVATIONS:-