You are on page 1of 1

Name of Plant „MBR Hünxe“

Type of Application „Municipal wastewater“


Operator: „Emschergenossenschaft/Lippeverband“
Plant data:
Qd, average = 1,130 m³/d
Qh,max = 270 m³/h
Average Flux = 15 LMH
Peak Flux = 25 LMH
Tempminimum = 8 °C

Modules: 28 x BC400F-C100-UP150
Total membrane surface: 11,200 m²
Date of commissioning: October 2009

Specific plant informations:


The MBR plant is designed for a capacity of 8,800 PE. The dimensions of the
four filtration lines enable the larger part of nitrification to take place inside them.
Due to the high packing density of the BIO-CEL® modules, only about 25 % of
the basin volume is utilized in comparison to systems with conventional flat
plate
l t membrane
b modules.
d l Th modules
The d l are installed
i t ll d att a d depth
th off about
b t 4 m.
Thus the fine bubble aeration of the BIO-CEL® modules also covers most of the
oxygen demand for the biologic process.

You might also like