Professional Documents
Culture Documents
1. DESCRIPTION:
Five nos. of AT weld sample pieces were received from QAC directorate to carry out
Hardness test and chemical analysis as per specification no. IRS: T-19/2012.
Marking on head
M&C Lab. No. Remark
(red marker)
51/14/H H-R
Small Cut pieces of
51/14/O OT-H
AT-weld part of the
51/14/K ITC/K
rail head were
51/14/N ITC/N
received.
51/14/R ITC/R
3. HARDNESS TEST:
4. CHEMICAL ANALYSIS:
Page 1 of 2
5. REMARKS:
Grades of AT Weld Samples (i.e. 90UTS, 72 UTS etc.) referred in the above note were
not mentioned. Hence, no comments can be offered.
(M.K.Gupta)
ARO/MIT
Director/M&C
Director/QAC/Mod
Page 2 of 2