Professional Documents
Culture Documents
自动对焦说明书 -EN
自动对焦说明书 -EN
1) Description
This product have automatic mode and manual mode. The two modes can
2) Installation
The measuring center distance of this product is 200 mm, the measuring
range is (+80 mm) and the repetition accuracy is 0.2 mm
3) Function
4) Operation
When the product is installed, press the manual button after power-on, the
screen will show that in the manual mode, press up or down, adjust the height
(long press fast, short press slow), determine the height (laser focus) correctly,
press the setting button long, after hearing the "beep" sound, the
predetermined height is set successfully
--working
Press the automatic button and the system will switch to the automatic state.
At this time, as long as the auto-focusing signal is triggered, the product will
automatically adjust the elevation, and output the completed signal after
reaching the predetermined height. It can also press the yellow button to
realize the auto-focusing function
5)attention
--The preset height should be guaranteed at 200 mm (+80 mm), otherwise the
preset height can not be set.