Professional Documents
Culture Documents
Busbar Bending Regulatory
Busbar Bending Regulatory
Objective:
This document will specify ATS busbar production design limitation due to type, dimension, and machine
specification.
ATS determination:
Shape T (mm) Angle (°) A (mm) B (mm) C (mm) D (mm)
10 90 50 50 X X
5 90 20 20 X X
10 90 50 70 50 X
5 90 20 35 20 X
10 90 50 90 50 X
5 90 20 40 20 X
10 90 50 70 70 50
5 90 20 35 35 20
10 90 50 90 70 50
5 90 20 40 35 20
Note: All bending dimensions in table are in order from top-left to bottom-right according to each corner.
Environmental condition:
Busbar bending machine:
+ NUMSUNG NSB506 (Mechanical manutention bending)
+ NUMSUNG NSB601 (Mechanical manutention punching and bending)
+ Jingpeng JPMX-303 (NC type bending and Mechanical manutention punching)
Exception:
In case, some designing are in critical conditions, designer can consult with production mechanical method
to be able to approach deeper possibility.