Professional Documents
Culture Documents
HW Assignment - 5 - Solution PDF
HW Assignment - 5 - Solution PDF
Homework assignment 5
Solution task 1
Choose basic size D = d = 35 mm. From Table 7-9, a locational interference fit is designated as
H7/p6. From Table A-11, the tolerance grades are ∆D = 0.025 mm and ∆d = 0.016 mm. From
Table A-12, the fundamental deviation is δF = 0.026 mm (δhole = 0).
Dmin = D = 35.000 mm
The bearing bore specifications are within the hole specifications for a locational interference fit.
Now find the necessary shaft sizes.
Shaft:
Solution task 2
1a) Deep groove ball bearings can take side loads. Good alternatives are double-row bearings or
tapered roller bearings.
1b) FD = 5.34 kN
a = 0.3
Load rating from table 11-2: C10 = 19.5 kN for deep groove bearing
Solution task 3
=
2. (a) Fa 3=
kN, Fr 7= =
kN, nD 500 rev/min, V 1.2
Fa / C0 = 3 / 34 = 0.088
Fa 3
= = 0.357
VFr (1.2 )( 7 )
Since this is greater than e, interpolating Table 11-1 with Fa / C0 = 0.088, we obtain
FD = Fe