Professional Documents
Culture Documents
PPC Obje
PPC Obje
In order to get uniform thickness of the plate by rolling process, one provides
(a) camber on the rolls (b) offset on the rolls [IES-1993]
(c) hardening of the rolls (d) antifriction bearings
4. Assertion (A): In a two high rolling mill there is a limit to the possible reduction in thickness
in one pass. [IES-1999]
Reason (R): The reduction possible in the second pass is less than that in the first pass.
(a) Both A and R are true and R is the correct explanation of A
(b)) Both A and R arc true but R is NOT the correct explanation of A
(c) A is true hut R is false
(d) A is false but R is true
5. Assertion (A): Plastic deformation in metals and alloys is a permanent deformation under
load. This property is useful in obtaining products by cold rolling. [IES-1998]
Reason (R): Plastic or permanent deformation in metal or alloy is caused by movement or
dislocations.
(a) Both A and R are true and R is the correct explanation of A
(b)) Both A and R arc true but R is NOT the correct explanation of A
(c) A is true hut R is false
(d) A is false but R is true