Professional Documents
Culture Documents
In order to get uniform thickness of the plate by rolling process, one provides
(a) camber on the rolls (b) offset on the rolls [IES-1993]
(c) hardening of the rolls (d) antifriction bearings
4. Assertion (A): In a two high rolling mill there is a limit to the possible reduction in thickness
in one pass. [IES-1999]
Reason (R): The reduction possible in the second pass is less than that in the first pass.
(a) Both A and R are true and R is the correct explanation of A
(b)) Both A and R arc true but R is NOT the correct explanation of A
(c) A is true hut R is false
(d) A is false but R is true
5. Assertion (A): Plastic deformation in metals and alloys is a permanent deformation under
load. This property is useful in obtaining products by cold rolling. [IES-1998]
Reason (R): Plastic or permanent deformation in metal or alloy is caused by movement or
dislocations.
(a) Both A and R are true and R is the correct explanation of A
(b)) Both A and R arc true but R is NOT the correct explanation of A
(c) A is true hut R is false
(d) A is false but R is true