Professional Documents
Culture Documents
TE Project List1 PDF
TE Project List1 PDF
Contact:
Email: info1.exceltech@gmail.com
DATA LOGGER
PIC 18F4520
SMS/GSM COMMUNICATION
(Note: All GSM projects include a GSM modem)
S.NO PROJECT PROJECT TITLES DESCRIPTION
CODE
40. TE40 GSM based Gas Here the μC is to GAS
monitoring system. interfaced to
Monitoring and control GSM modem. μC continuously
system monitors the GAS reading. When
the Gas leak is detected then an
SMS is sent to the user
(GAS, μC, GSM modem, Buzzer)
41. TE41 GSM based Soil Here the μC is to Soil moisture
monitoring system. μC is
moisture interfaced to GSM modem. μC
Monitoring and control continuously monitors the Soil
Humidity reading. When the soil
moisture is Low then the water
motor is turns ON and an SMS is
sent to the user
Soil moisture, μC, GSM modem,
Buzzer, Water motor)
42. TE42 GSM based Green House Here the μC is to Green house
sensors such as Temperature,
Monitoring Humidity, soil moisture
monitoring system. μC
is interfaced to GSM
modem. μC continuously
monitors the temperature,
Humidity and Soil moisture
reading. When the any of the
sensors reading cross the set
point an SMS is sentto the
user. (Temperature,
Humidity, Soil moisture, μC,
43. TE43 GSM the
Here modem,
μC is Buzzer, Water
to Hazardous
Hazardous Environment environment sensors such as
Monitoring and control Temperature, Fire and
GAS monitoring
system. μC is interfaced
to GSM modem. μC
continuously monitors
the temperature, Fire and
GAS reading.
When the any of the sensors
reading cross the set point an
SMS is sent to the user.
44. TE44 Car Dashboard Here the μC is to car dashboard
sensors such as Temperature,
Monitoring with SMS Fuel and Speed monitoring
based Theft Indication system. μC is interfaced to GSM
modem. μC
continuously monitors the
temperature, Fuel and speed
reading. Also the user has to
enter an password via Matrix
KB. If the password matches
ten only door opens otherwise
an SMS is sent to the user.
(Temperature, Fuel, Speed, μC,
GSM modem, ,Matrix KB,
45. TE45 Flood control and Water Here the μC is to Flood alert such
as water level and rain fall
Environment Monitoring monitoring system. μC is
interfaced to GSM modem. μC
continuously monitors the water
level and Rain fall sensor. As
soon as water level increases than
the set level an SMS is sent to the
nearby population. (Water level,
Rain fall, μC, GSM modem,
Buzzer)
46. TE46 Material Management Here the μC is interfaced to a
Load cell which continuously
system with auto monitors the weight of stock.
Ordering facility When the weight goes below a
set point the μC will
automatically send SMS before
the stock is empty.
(Load cell Model , LCD,
BUZZER, GSM)
47. TE47 GSM Based Security Here the μC is interfaced to GSM
via RS232 link. The user has to
System the password via SMS. If the
password is correct then the
security system is turned ON
((μC , PIR, RS232, GSM, LCD,
BUZZER)
48. TE48 GSM Based Home Here the μC is interfaced to an
passive infrared (PIR) sensor
automation which detects the human
presence. The system is turned
on when the user sends an
SMS with password. As and
when any human presence is
detected all the appliances are
turned ON. Also the Fan light
are controlled via temperature
and Light sensors. The μC will
turn ON/OFF the light and
FAN according to the Light
and temperature readings thus
saving energy (Temp ,Light,
LCD, PIR, GSM
modem, Relay*3)
49. TE49 GSM Based Highway Here the μC is interfaced to
various sensors that can detect
Accident Information and avoid accidents. Also an SMS
System is sent to the owner about to
accident details.
(Alcohol, Eye blink, Gas , Fire,
LCD, BUZZER,GSM modem)
50. TE50 GSM Based Here the user can Send a Text
notice on LCD(16*2). The user
Advertisement Display has to first type the notice on
System Mobile phone. After the Message
is typed the user can send the
notice to μC via GSM modem.
The μC will then receive the
Notice and display on LCD (μC ,
GSM LCD)
Wireless Communication
(Note: Wireless module: RF / IR / Bluetooth (BT))
BIOMEDICAL
69. TE69 Here the μC is interfaced to
Body temperature temperature sensors which
monitoring system cover the whole body area In
this way we can monitor the
` body temperature of patient.
(Temp , LCD, BUZZER)
70. TE70 Here the μC is interfaced to
Pulse rate IR+LDR sensors which dtect
monitoring system the flow of blood and generate
minute pulses which are
amplified by μC.
(Pulse Rate , LCD, BUZZER)
71. TE71 Here the μC is interfaced to
Temperature and temperature sensors also the
pulse rate monitoring μC is interfaced to IR+LDR
sensors which dtect the flow of
system blood and generate minute
pulses which are amplified by
μC. which cover the whole
body area In this way we can
monitor the body temperature
and pulse rate of patient.
(Temp,Pulse rate LCD,
BUZZER)
72. TE72 Here the μC is interfaced to
Respiration IR+LDR sensors which detect
monitoring system the movement of Ball in a test
tube which is regulated by
patient’s breathing rate. The
respiration rate is displayed on
LCD.
(Respiration rate sensor , LCD,
BUZZER)
73. TE73 Here the μC is interfaced to
Heart beat IR+LDR sensors which detect
monitoring with GSM the flow of blood and generate
minute pulses which are
indication amplified by μ C. As soon as
the heart rate goes beyond the
set point the μC will send an
SMS via GSM modem
(Pulse Rate , GSM
modem,LCD, BUZZER)
74. TE74 Here the μC is interfaced to
wireless health temperature sensors also the
monitoring μC is interfaced to IR+LDR
sensors which dtect the flow of
for patients blood and generate minute
(Temp+ Pulse rate) pulses which are amplified by
μC. which cover the whole
body area In this way we can
monitor the body temperature
and pulse rateof patient. Also
the readings are sent tp PC
wirelessly via RF module to
PC.
(Temp,Pulse rate, RF module,
PC, LCD, BUZZER)
ROBOTICS
75. TE75 In this project we are using an RF
4 Channel RF based link of 433Mhz. The user is given
Pick and Place robot 4 buttons to control the robot.The
user can control the robot
forward, Reverse, left
right through his wireless RF link
Link. On Mobile we have 4
Keyl Keypad control buttons to
control the buggy
((μC , Robo buggy, 433Mhz RF
link, LCD )
76. TE76 The main principle of the project
Solar Tracker Robot is to track the sun as it moves in
the sky that the sunrays fall at a
perpendicular angle to the surface
of the solar panel which will
result in maximum production of
voltage for the whole day. So the
solar Panel robot will move the
solar panel according to Sun
Movement in the sky.
((μC , Solar Panel Model,DC
motor, LCD )
77. TE77 In this project we are designing a
Surveillance Robot robot for surveillance purpose.
with For this we are using an RF link
of 433Mhz based robot. The user
camera Interface is given 4 buttons to control the
robot.The user can control the
robot forward, Reverse, left right
through his wireless RF link Link.
Also we have interfaced a
Wireless camera whose video
feed can be seen on TV.
((μC , Robo buggy, 433Mhz RF
link, LCD , Camera)
78. TE78 In this project we are designing a
Wireless Agriculture robot for Agriculture purpose. For
Robot this the robot is equipped with a
Plaugh, and water mechanism.we
are using an RF link of 433Mhz
based robot. The user is given 4
buttons to control the robot. (μC ,
Farm buggy, 433Mhz RF link,
LCD )
79. TE79 In this project we are designing a
Android based Voice Robot which can be controlled by
controlled Robot Voice recognition from PC. For
this we use Visual Basic software
(V/B s/w) on PC to recognize
Voice. Once the voice command
from user is recognized then the
μC will move the buggy Forward,
reverse, Left Right start and stop
(μC , buggy, Rs232, LCD , PC
(VB s/w)).
80. TE80 The main aim of the project is to
Dam gate automation constantly monitor the DAM
water level and Rain fall and
compare it with lookup table. If
the water level crosses the set
point then we operate a DC motor
based DAM door which will
control the water supply.
81. TE 81 This project utilizes two
Automatic railway Mechanical switches ,one pair
Gate control and of Mechanical switch is fixed
at up side (from the train
alert comes) and similarly other pair
is fixed at down side of the
train direction. Once
the interrupt from
Mechanical switch is
generated the Rail way gate
is closed and the buzzer is
turned ON
(μC , train buggy, mechanical
82. TE 82 Here we are designing a Object
Conveyor based counter based on conveyor belt
Object counter system. As soon as the object
move along the conveyor the IR
sensor senses the obstacle and
sends the indication to μC. The
μC counts the objects and
displays the count on LCD. A belt
conveyor consists of two or more
pulleys, with a continuous loop of
material - the conveyor belt - that
rotates about them. (μC
, Conveyor Model, IR *2, LCD
, Buzzer, LCD)
83. TE 83 An accelerometer is a device
Accelerometer based which gives us acceleration in X,
Hand gesture Y and Z directions. Using these
readings we are designing a robot
controlled robot which can be controlled using
hand gestures. The user can
control the buggy in forward,
reverse, Left and right direction
(μC , Robot model,
Accelerometer, LCD)
MATLAB with μC
S.NO PROJECT PROJECT TITLES DESCRIPTION YEAR
CODE
84. TE 84 MATLAB based Color Here we are using a Color sorting
machine. For this we make use of
Sorting system MATLAB s/w. A web cam is
interfaced to PC and μCis
connected to PC. The MATLAB
will take photo from webcam.
Then we apply
color identification algorithm
and sort the object according
to color (RED, GREEN,
BLUE) (DC motor , μC , LCD,
85. TE 85 MATLAB based Fruit Here we are fruit grading system.
For this we make use of
quality control. MATLAB s/w. A web cam is
interfaced to PC and μC is
connected to PC. The MATLAB
will take photo from webcam.
Then we apply
color identification
algorithm and deprnding on
the color of fruit we can grade the
Fruit quality (, μC , LCD, PC,
86. TE86 MATLAB based Here we a r e designing a
system for military which can
enemy detection accurately differentiate enemy
from friendly. For this we make
use of MATLAB s/w. A web
cam is interfaced to PC and μC
is connected to PC. The
MATLAB will take photo from
webcam. Then we apply
SURF identification algorithm
and the vehicles as Enemy or
friendly. If enemy detected we
have gun mechanism to shoot (,
μC , LCD, PC, Robot, Webcam)
87. TE 87 MATLAB based Here we a r e designing a
system for detecting plant health
Plant health monitoring using image processing. For this
we make use of MATLAB s/w.
A web cam is interfaced to PC
and μC is connected to PC. The
MATLAB will take photo from
webcam. Then we apply HSV
algorithm to detect the height of
plants.( μC , LCD, PC, Robot,
Webcam)
LATEST TE mini project
PIC 18F4520
S.NO PROJECT PROJECT TITLES DESCRIPTION
CODE
88. TE 88 µC interface to GPS Here the μC is interfaced to GPS
which gives the latitude and
GPS based vehicle longitude co-ordinates on LCd
tracking through which we can track the
vehicle location (GPS ,LCD, μC)
89. TE 89 µC interface to Flex Sensor Here the μC is interfaced to flex
sensor which gives finger position
which can be used as gesture
Flex sensor based robot recognition for robot control For
this we make a hand glove fixed
control with flex sensors. According to
finger movement the vehicle can
move Forward, reverse, Left and
right (Flex sensor ,LCD,
μC,Robot)
90. TE 90 Street Light Control based on Here the μC is connected to a
RTC which continuously gives
Real time clock (RTC) the reat time in Am and PM
format. Here as soon as the time
goes above 6pm then the lights
are turned ON and after 7 am the
street lights are turned OFF which
saves a lot of energy.(LED*4,
RTC, 4 Key KB, LCD)
prevent accident. (μC*2 , Robot
buggy, 433Mhz RF link, LCD )
91. TE 91 Automated Checkpoint In this project we interfacing
RFID reader to μC. As soon as
LOGS for race any RFID comes in contact with
the reader ,the μC will keep track
of check point with time taken. At
the end it is usefull to track
athletes performance and race
time. (μC ,RFID, , LCD, Buzzer )
92. TE 92 Body Mass Index calculator In this project The user has to
enter the weight via Matrix KB.
(BMI) Also we are interfacing ultrasonic
sensor to μC. The Ultrasonic
sensor will continuously give the
height reading in cm using
Doppler effect. The μC will
display the BMI
reading according to height and
weight of user. (μC ,Ultrasonic
reader, LCD, Matrix KB, Buzzer )
93. TE93 Automatic drowsy driver Here we are constantly
monitoring the alert ness of
detection for accident Driver, In this project we are
prevention interfacing Accelerometer to
detect fall due to sleep. Also we
have interfacing an alcohol sensor
for intoxication. If the friver is
fount to be sleeping or intoxicated
awe turn off the ignition and turn
on the buzzer(μC, Accelerometer,
,Alcohol, Buzzer )
94. TE 94 Automatic Resistor Here we are calculating the
resistor value from the color code.
calculator The user has to enter the color
code using matrix KB. After the
color code is entered the μC will
calculate the resistor value and
display on LCD.(μC, Matrix KB,
Buzzer, LCD )
95. TE 95 Automatic tsunami Here we are detecting the
Tsunami wave in sea. For this we
detection mechanism are interfacing ultrasonic sensor
to μC. The Ultrasonic sensor will
continuously give the height
reading using Doppler effect. As
soon as the sea wave height goes
above set height buzzer is turned
ON and an automated distress
SMS is sent to people. (μC,
Ultrasonic, Buzzer, LCD, GSM
modem )
96. TE 96 Intelligent parking system .
Here we are designing automated
parking system in which as soon
as a user parks a vehicle the μC
senses it and display the status on
LCD. When the parking is full
then a Buzzer indication is given
to user. (μC,Patti s/w*4, LCD ,
Buzzer,)