Professional Documents
Culture Documents
FS 1370dnentb1lad
FS 1370dnentb1lad
SUBJECT: BULLETIN #
INTRODUCTION ............................................................................................................................................................... 1
UTILITIES ........................................................................................................................................................................ 12
INTRODUCTION
Technical Services is pleased to announce the launch of the FS-1370DN Printer. The FS-1370DN produces
37 (LTR) pages per minute in B&W and is equipped with 128MB of standard built-in memory.
GENERAL INFORMATION
Product Name FS-1370DN
Product Code 2L0xxx
Product Training Learning Center on KMAconnect
LAD Technical Division 1-305-421-6640
Software Solution Group Email software_solution@kyoceramita.com
KMAconnect Web Site kmaconnect.com
KMAconnect Help Desk dealersupport@kyoceramita.com
Kyocera Mita Web Site kyoceramita.com
Kyocera Technical Support (Email) support@kyoceramita.com
Material Safety Data Sheet Available on KMAconnect
National Processing Center (Customer Service) 1-866-596-2372 or customer_service@kyoceramita.com
National Training Center training@kyoceramita.com
FS-1370DN-01
June 08, 2010
Page 2
Kyocera Mita America, Inc. (“Kyocera”) warrants to its Authorized Dealers that its new
Multifunctional Products/ Printers (both referred to herein as “MFP/Printers”) will be free from
defects in workmanship and material under normal use and service for a period of 15 months
from Kyocera’s invoice date to Dealer, or the specified number of copies/prints as listed below,
whichever is earlier. Kyocera obligation hereunder is expressly limited to providing Dealer with the
parts required to repair the MFP/Printer or crediting Dealer's account for the cost of said parts, at
Kyocera's election. Maintenance Kits, lamps, exterior covers, consumable parts, and all labor
costs, are specifically excluded from this warranty.
This warranty does not cover MFP/Printers, which: (a) have become damaged due to operator
negligence, misuse, accidents, improper storage or unusual physical or electrical stress, (b) have
used parts or supplies which are not genuine Kyocera brand parts or supplies, (c) have been
installed or serviced by a technician not employed by Kyocera or an Authorized Kyocera Dealer,
(d) have had the serial number modified, altered, or removed, or (e) Dealer fails to register the
installation information for the MFP/Printer with Kyocera utilizing KMAconnect.
This warranty is valid only for original retail purchaser (the “Purchaser”) of a new maintenance kit in the
United States of America or Canada, based upon the country of purchase. In order to receive warranty on
a replacement maintenance kit, the replacement must be registered by an Authorized Dealer within
30 calendar days or 10% of the maintenance kit life, whichever comes first, from the expiration of the
previous maintenance kit's warranty.
In order to obtain performance of this warranty, the purchaser must return the defective maintenance kit unit
in the original carton with proof of purchase (with date of purchase) together with a complete explanation of
the problem to an Authorized Kyocera Service Facility in the United States or Canada, based upon the
country of purchase. Any shipping charges must be prepaid by the Purchaser.
This warranty does not cover maintenance kits, which: (a) have become damaged due to operator
negligence, misuse, accidents, improper storage, or unusual physical or electrical stress, (b) have used
parts and supplies which are not genuine Kyocera brand parts or supplies, (c) do not work properly because
of failure to follow operating, storage or maintenance instructions, (d) have been installed or serviced by a
technician not employed by Kyocera, or an Authorized Servicing Facility, or (e) have had the serial number
modified, altered or removed.
If the Dealer from whom the Purchaser purchased the printer is not an Authorized Kyocera Service Facility,
the purchaser may obtain the name and address of an Authorized Kyocera Service Facility by writing to
Kyocera at the address below or on the web at www.kyoceramita.com/us for Kyocera Mita America, Inc. or
www.kyoceramita.com/ca for Kyocera Mita Canada.
This warranty gives you specific legal rights. The Purchaser may also have other rights that vary from state
to state, or province to province. Neither the seller, nor any other person, is authorized to extend the time
period or expand this warranty on behalf of Kyocera.
THIS WARRANTY IS MADE IN LIEU OF ALL OTHER WARRANTIES AND CONDITIONS, EXPRESS OR
IMPLIED, AND KYOCERA SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTY OR CONDITION OF
MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. THIS WARRANTY SHALL NOT
EXTEND TO, AND KYOCERA SHALL NOT BE LIABLE FOR, ANY INCIDENTAL OR CONSEQUENTIAL
DAMAGES THAT MAY ARISE OUT OF THE USE OF, OR INABILITY TO USE, THE MAINTENANCE KIT.
PRODUCT TRAINING
*Product Training Technical Learning Center on KMAconnect
Prerequisites None
Dealer Technicians who have completed the online training for the FS-1100D/1300D/1120D/1320D
are considered certified on the FS-1370DN.
Product Training for new Dealers for the FS-1370DN is offered as a full FS-1120D/1320D/1370DN
On-Line Training Course, available at the Learning Center on KMAconnect.
SERVICE DOCUMENTATION
Description Availability
FS-1370DN/PF-100 Service Manual Rev-1 Available on KMAconnect
FS-1370DN/PF-100 Parts List Available on KMAconnect
FS-1370DN Operation Guide Basic Available on KMAconnect
FS-1370DN Operation Guide Advanced Available on KMAconnect
FS-1370DN Printer Driver User Guide Rev. 12.8 Available on KMAconnect
FS-1370DN Installation Guide Available on KMAconnect
Kyocera Command Center Operation Guide Rev. 5.3 Available on KMAconnect
KM-NET Viewer Operation Guide Rev. 5.2 Available on KMAconnect
PRESCRIBE Commands Technical Reference Manual - Rev. 4.7 Available on KMAconnect
PRESCRIBE Commands Command Reference Manual Rev 4.8 Available on KMAconnect
KM-NET Admin Operation Guide Rev-2.0 Available on KMAconnect
KM-NET for Direct Printing Operation Guide Rev-3.0 Available on KMAconnect
The PF-100 is included in the Service Manual and Parts List.
ACCESSORY / OPTIONS
ITEM Part Number Description
PF-100 1203LF6US0 Paper Feeder (Maximum Two)
SD-144-128 (A) 855D200293 144pin DDR SDRAM Printer Memory (128MB)
SD-144-256 (A) 855D200294 144pin DDR SDRAM Printer Memory (256MB)
SD-144-512 (A) 855D200295 144pin DDR SDRAM Printer Memory (512MB)
SD-144-1 (A) 855D200296 144pin DDR SDRAM Printer Memory (1GB)
.
MK-172
Description Part Number Quantity
DK-170 Dum Unit 302LZ93060 1
DV-172 Developer Unit 302LZ93020 1
The Long Life Components included with the original printer carry a warranty for a period of three years or
200,000 prints, whichever first occurs. Long Life Components consist of the Fixing Unit. Replacement Long
Life Components installed as a result of a warranty claim are covered until the end of the original 3 year
200,000 print warranty.
FIRMWARE INFORMATION
Version Description Location Availability
(Shown on the Status Page)
Main 2L0_3000.001.011 (Flash) Available on KMAconnect
Engine 2L0_1000.001.001
If you require an Engine or Printer System Firmware Update, Firmware can be updated via USB or Compact Flash.
See Page 1-6-2 in the Service Manual for upgrade procedure.
FS-1370DN-01
June 08, 2010
Page 7
* Repair PCB Price includes credit issued after return of old Board.
Defective PCB’s being returned within the 1-Year warranty period must be returned to the National Return
Center utilizing the Parts Warranty Registration & Return System on KMAconnect. Print out the Return
Authorization form obtained through the system and return it with the Circuit Board for Credit. Any
associated mounting brackets, hardware, system software and original packaging must be included with the
claim. Credit will then be issued to your account.
For defective PCB’s out of warranty, a Repair PCB must be ordered from the Parts Distribution Center. The
dealer will be charged 100% of the New PCB price. The defective PCB can be returned using the Online
Repair Board Core Form within 30 days of the Repair PCB invoice date. Upon receipt of the defective PCB
at the National Return Center, the dealer will be credited 55% of the New PCB price. If a New PCB is
ordered instead of a Repair PCB, credit will not be issued for the returned defective PCB.
MEMORY TYPE
Item Specification
Type & Number of Pins 144 pin DDR2 SDRAM DIMM
FS-1370D Specifications
Type Desktop
Printing method Electrophotography, laser scan
Paper weight Cassette: 60 to 120 g/m2, 16 ~ 32lb. Bond
(Duplex: 60 to 105 g/m2), 16 ~ 28lb. Bond
MP tray: 60 to 220 g/m2, 16 ~ 58lb. Bond
Paper type Cassette:
Plain, Preprinted, Bond, Recycled, Rough, Letterhead, Color,
Prepunched, High quality, Custom 1 to 8
MP tray:
Plain, Transparency, Preprinted, Labels, Bond, Recycled, Rough, Vellum,
Letterhead, Color (Colour), Prepunched, Envelope, Cardstock, Thick paper,
High quality, Custom 1 to 8
Paper size Cassette:
A4, JIS B5, A5, Folio, Legal, Letter, Oficio II, Statement, Executive, A6, B6,
ISO B5, Envelope C5, 16K, Custom (105 × 148 to 216 × 356 mm/4 1/8 × 5 13/16" to 8
1/2 × 14")
MP tray:
A4, JIS B5, A5, Folio, Legal, Letter, Oficio II, Statement, Executive, A6, B6,
ISO B5, Envelope C5, Envelope #10, Envelope #9, Envelope #6-3/4,
Envelope Monarch, Envelope DL, Hagaki, Ofuku Hagaki, 16K, Yokei 2, Yokei 4,
Custom (70 × 148 to 216 × 356 mm/2 13/16 × 5 13/16" to 8 1/2 × 14")
Printing speed Simplex printing:
35 ppm (A4)
37 ppm (Letter)
20 ppm (A5)
Duplex printing
19 ppm (A4)
20 ppm (Letter)
First print time 7 seconds or less (A4, feed from cassette)
Warm-up time 120 V AC model:
Power on 20 seconds or less (22 °C/71.6 °F, 60%RH)
Sleep 15 seconds or less (22 °C/71.6 °F, 60%RH)
Paper capacity Cassette: 250 sheets (80 g/m2, 21lb. A4/Letter or smaller)
MP tray: 50 sheets (80 g/m2, 21lb. A4/Letter or smaller)
Output tray capacity Simplex printing: 250 sheets (80 g/m2, 21lb.)
Duplex printing: 200 sheets (80 g/m2, 21lb.)
Continuous printing 1 to 999 sheets
Photoconductor OPC drum (diameter 30 mm)
Image write system Semiconductor laser (1 beam)
Charging system Scorotron (positive charging)
Developing system Mono component dry developing method
Toner replenishing: Automatic from the toner container
Transfer system Transfer roller (negative-charged)
Separation system Small diameter separation, discharger brush
Cleaning system Drum: Counter blade
Charge erasing system Exposure by eraser lamp (LED)
Fusing system Heat roller system
Memory Standard: 128 MB
Maximum: 1152 MB
Resolution Fine 1200 mode, Fast 1200 mode, 600 dpi, 300 dpi
Operating environment Temperature: 10 to 32.5 °C/50 to 90.5 °F
Humidity: 15 to 80%
Altitude: 2,500 m/8,202 ft maximum
Brightness: 1,500 lux maximum
FS-1370DN-01
June 08, 2010
Page 9
Specifications (continued)
PF-100
BTU’s
Watts Watts
based based
Power on PPM on PPM
Model Consumption PPM Prints/Hr & Pr/Hr & Pr/Hr kW/hour Total BTU
Total Total
Print Ready Print Ready
(W) (W) (*3421.14)
FS-1370DN 584 93.3 37 500 131.5 72.3 0.2038 695.5
584 93.3 37 1,000 263.1 51.3 0.3143 1072.6
584 93.3 37 1,500 394.6 30.3 0.4249 1449.7
584 93.3 37 2,220 584.0 0.0 0.5840 1992.7
Total BTU’s are based on Prints per Minute, Prints per Hour. Watts are based on PPM &
Pr/Hr and Kw/Hour.
POWER CONSUMPTION
Specification Main Body
US/Canada 120 V AC 10%, 60Hz 2%, 8A
Voltage requirements International 220V 220V to 240V AC, 50/60 Hz, 4.2A
Standard Configuration Maximum 925W
Sleep/Off Mode 5.5W
Printing 584W
Ready 93.3 (EcoFuser OFF)
10.3W (EcoFuser ON)
NEMA 5-15R
FS-1370DN-01
June 08, 2010
Page 11
INSTALLATION REQUIREMENTS
Allow sufficient access for proper operation and maintenance of the machine.
Machine front: 500 mm/19 11/16"
Machine rear: 200 mm/7 7/8"
Machine right: 300 mm/11 13/16"
Machine left: 300 mm/11 13/16"
Machine top: 200 mm/7 7/8"
UTILITIES
NETWORK Description
KM-NET Viewer, 5.2.1510 Administrator Utility which monitors Kyocera network
devices with the ability to display and report device
conditions via e-mail using SMTP.
KMnet Admin KMnet Admin is Kyocera's unified device management
solution that uses a web-based platform to give network
administrators easy and uncomplicated control of all
network enabled printing devices.
KMnet Admin is web-based, so no client software
installation is necessary.
Quick Set-up Utility Quick Set-up Utility for Network Administrators used to set-
up IP Printing and Addresses on Network Printers.
PRINT
KM-NET for Direct Printing Allows Direct Printing of Adobe PDF’s without launching
Adobe’s Acrobat or Acrobat Reader applications.
PRINT DRIVERS
Print Drivers can be downloaded from KMAconnect and kyoceramita.com. Note: Drivers are periodically
updated and versions posted in the future may not match this chart.
PRODUCT CONFIGURATION