Professional Documents
Culture Documents
Kingspan - Evolution KS1000 EVO - CAD Wall Horizontal - Q12019 - NZ - EN
Kingspan - Evolution KS1000 EVO - CAD Wall Horizontal - Q12019 - NZ - EN
G:\Technical\1-current\Drawings\current 2013 Q1\EVO Wall Horizontal\KS1000 EVO Wall Horizontal_ Q1 2019.dwg, 7/08/2019 3:04:36 p.m., AutoCAD PDF (High Quality Print).pc3
EVOLUTION AXIS WALL PROFILE
KS 600 EVOLUTION AXIS PANEL PROFILE AVAILABLE PANEL NOTE: DIMENSIONS ARE NOMINAL,
THICKNESSES ACTUAL DIMENSIONS WILL VARY DUE
TO MANUFACTURING TOLERANCES.
600mm PANEL MODULE INSULATION CORE PRECISE DIMENSIONS MUST ALWAYS
BE MEASURED FROM ACTUAL SAMPLES
50
596 FOR 1000mm PANEL MODULE ALL DIMENSIONS IN MILLIMETRES.
80
INTERNAL LINER SHEET EXTERNAL WEATHER SHEET 100
140
KS600_EVO 50 mm
KS900_EVO 50 mm
DESCRIPTION
EVOLUTION AXIS WALL PROFILE
100
140
250 250 250 250
SYSTEM
KS1000 EVO WALL HORIZONTAL_ Q1 2019
G:\Technical\1-current\Drawings\current 2013 Q1\EVO Wall Horizontal\KS1000 EVO Wall Horizontal_ Q1 2019.dwg, 7/08/2019 3:04:39 p.m., AutoCAD PDF (High Quality Print).pc3
EVOLUTION RECESS PROFILE AVAILABLE PANEL NOTE: DIMENSIONS ARE NOMINAL,
THICKNESSES ACTUAL DIMENSIONS WILL VARY DUE
TO MANUFACTURING TOLERANCES.
INSULATION CORE PRECISE DIMENSIONS MUST ALWAYS
KS600_EVO 50 mm
BUBBLE GASKET (TH-BUBBLE)
Silicone Seal
SITE APPLIED
Site Applied
10mm or 20mm
KS900_EVO 50 mm
EVOLUTION RECESS WALL PANEL
HORIZONTALLY LAID
©Kingspan Ltd
20
Min. Steel Bearing Face 140mm Min. Steel Bearing Face 50mm Min. Steel Bearing Face 140mm
15 20 min 15
Min. Steel Bearing Face 200mm Minimum Fixing Spacings Min. Steel Bearing Face 200mm
15 20 20 15
SYSTEM
KS1000 EVO WALL HORIZONTAL_ Q1 2019
DESCRIPTION
EVOLUTION AXIS / MULTI-GROOVE
WALL HORIZONTAL FIXING
PATTERN B (DOUBLE / \TRIPLE FASTENERS)
APPROVED BY DATE REVISION
JS 18.03.19 -
NOTE: FASTENER NUMBER LOCATIONS & SPANS DEPEND DRG REF: SCALE SHEET PAPER SIZE
ON THE ACTUAL SUCTION / OUTWARD LOADS. EVO_HS_04 nts 5 A4
CHECK LOCALISED LOADS
This document remains the property of Kingspan Ltd under
copyright laws. Licence is granted to use this document and
its contents in connection with Kingspan Ltd products only.
©Kingspan Ltd
G:\Technical\1-current\Drawings\current 2013 Q1\EVO Wall Horizontal\KS1000 EVO Wall Horizontal_ Q1 2019.dwg, 7/08/2019 3:04:41 p.m., AutoCAD PDF (High Quality Print).pc3
EVO WALL HORIZONTAL SHEETING SUPPORTS
PORTAL BEAM
INSULATED PANELS
HORIZONTALLY LAID
INTERMEDIATE SYSTEM
SUPPORT POST KS1000 EVO WALL HORIZONTAL_ Q1 2019
(if required)
DESCRIPTION
EVO WALL HORIZONTAL SHEETING
SUPPORTS
STEELWORK BEARING WIDTH TO SUIT PANEL STEELWORK BEARING WIDTH TO SUIT
PANEL
APPROVED BY DATE REVISION
JS 18.03.19 -
G:\Technical\1-current\Drawings\current 2013 Q1\EVO Wall Horizontal\KS1000 EVO Wall Horizontal_ Q1 2019.dwg, 7/08/2019 3:04:41 p.m., AutoCAD PDF (High Quality Print).pc3
EVO WALL BASE (PANEL BEARER)
INTERMEDIATE SUPPORT
CONTINUOUS RUNS OF
6x4mm BUTYL SEALANT
INTERNAL CLOSER
FLASHING
SYSTEM
KS1000 EVO WALL HORIZONTAL_ Q1 2019
DESCRIPTION
CONTINUOUS RUN OF EVO WALL BASE (PANEL BEARER)
0.5mm COIL COATED BASE DRIP FLASHING. New Zealand: Kingspan Ltd
97 Montreal St
Christchurch
Tel: +64 (3) 260 5530
Fax: +64 (3) 260 5539
Freephone: 0800 121280
email: info@kingspanpanels.co.nz
www.kingspanpanels.co.nz
G:\Technical\1-current\Drawings\current 2013 Q1\EVO Wall Horizontal\KS1000 EVO Wall Horizontal_ Q1 2019.dwg, 7/08/2019 3:04:42 p.m., AutoCAD PDF (High Quality Print).pc3
EVO WALL BASE CHANNEL DETAIL
CONTINUOUS RUN OF
6x4mm BUTYL SEALANT
SYSTEM
KS1000 EVO WALL HORIZONTAL_ Q1 2019
GRADE SEALANT
New Zealand: Kingspan Ltd
97 Montreal St
Christchurch
Tel: +64 (3) 260 5530
Fax: +64 (3) 260 5539
Freephone: 0800 121280
email: info@kingspanpanels.co.nz
www.kingspanpanels.co.nz
G:\Technical\1-current\Drawings\current 2013 Q1\EVO Wall Horizontal\KS1000 EVO Wall Horizontal_ Q1 2019.dwg, 7/08/2019 3:04:43 p.m., AutoCAD PDF (High Quality Print).pc3
EVO BASE SUPPORT 3 OPTION B BASE CHANNEL
CONTINUOUS RUNS OF
6x4mm BUTYL SEALANT
CONTINUOUS RUNS OF
6x4mm BUTYL SEALANT CONTINUOUS RUN OF
GUN GRADE SEALANT
SYSTEM
KS1000 EVO WALL HORIZONTAL_ Q1 2019
DPC LAYER BETWEEN FACE OF This document remains the property of Kingspan Ltd under
CONCRETE AND FLASHING copyright laws. Licence is granted to use this document and
its contents in connection with Kingspan Ltd products only.
©Kingspan Ltd
G:\Technical\1-current\Drawings\current 2013 Q1\EVO Wall Horizontal\KS1000 EVO Wall Horizontal_ Q1 2019.dwg, 7/08/2019 3:04:44 p.m., AutoCAD PDF (High Quality Print).pc3
EVO WALL - EXTERNAL CORNER
SYSTEM
KS1000 EVO WALL HORIZONTAL_ Q1 2019
G:\Technical\1-current\Drawings\current 2013 Q1\EVO Wall Horizontal\KS1000 EVO Wall Horizontal_ Q1 2019.dwg, 7/08/2019 3:04:44 p.m., AutoCAD PDF (High Quality Print).pc3
EVO WALL - INTERNAL CORNER
SYSTEM
KS1000 EVO WALL HORIZONTAL_ Q1 2019
DESCRIPTION
EVO WALL - INTERNAL CORNER
SEALED WITH CONTINUOUS RUN DRG REF: SCALE SHEET PAPER SIZE
EVO_HS_09 1:3 12 A4
OF 6x4mm BUTYL SEALANT
This document remains the property of Kingspan Ltd under
copyright laws. Licence is granted to use this document and
its contents in connection with Kingspan Ltd products only.
FILL GAPS WITH FR FOAM FILLER ©Kingspan Ltd
G:\Technical\1-current\Drawings\current 2013 Q1\EVO Wall Horizontal\KS1000 EVO Wall Horizontal_ Q1 2019.dwg, 7/08/2019 3:04:45 p.m., AutoCAD PDF (High Quality Print).pc3
EXTERNAL PRE-FORMED CORNER (FOR 50, 80 & 100MM THICK PANELS ONLY)
Dim. C
Dim. A
82
°- 2°
15 - 15
2° °
82
SYSTEM
KS1000 EVO WALL HORIZONTAL_ Q1 2019
Dim. B
2°
- 15
82° DESCRIPTION
EXTERNAL PRE-FORMED CORNER
Dim. B
APPROVED BY DATE REVISION
JS 18.03.19 -
G:\Technical\1-current\Drawings\current 2013 Q1\EVO Wall Horizontal\KS1000 EVO Wall Horizontal_ Q1 2019.dwg, 7/08/2019 3:04:46 p.m., AutoCAD PDF (High Quality Print).pc3
KS1000 EVO Pre-formed Units
EVO WALL PREFORMED CORNER DETAIL (ISOMETRIC) Available for panel
thickness
50 EVO YES
80 EVO YES
1000
100 EVO YES
140 EVO NO
82° - 152°
.B
INTERNAL ANGLES = 82 DEG. TO 152 DEG.
Dim
MINIMUM MAXIMUM .A Dim
DIMENSION A 300mm 1200mm
G:\Technical\1-current\Drawings\current 2013 Q1\EVO Wall Horizontal\KS1000 EVO Wall Horizontal_ Q1 2019.dwg, 7/08/2019 3:04:47 p.m., AutoCAD PDF (High Quality Print).pc3
EVO WALL TOP HAT JOIN SINGLE FIXING (PLAN) Isometric
BEARING SURFACE
BUBBLE GASKET (SITE APPLIED) MIN 50mm
40mm max
INFILL FOAM (SITE APPLIED)
35mm 35mm
TYPICAL TOPHAT BASE DETAIL
SYSTEM
KS1000 EVO WALL HORIZONTAL_ Q1 2019
DESCRIPTION
EVO WALL TOP HAT JOIN SINGLE FIXING
(PLAN)
G:\Technical\1-current\Drawings\current 2013 Q1\EVO Wall Horizontal\KS1000 EVO Wall Horizontal_ Q1 2019.dwg, 7/08/2019 3:04:48 p.m., AutoCAD PDF (High Quality Print).pc3
EVO WALL TOP HAT JOIN SEAL DETAIL
STRUCTURE (By Others)
KS1000 EVO WALL
PANEL (cut away)
FACTORY APPLIED
AIR SEAL
SYSTEM
KS1000 EVO WALL HORIZONTAL_ Q1 2019
G:\Technical\1-current\Drawings\current 2013 Q1\EVO Wall Horizontal\KS1000 EVO Wall Horizontal_ Q1 2019.dwg, 7/08/2019 3:04:57 p.m., AutoCAD PDF (High Quality Print).pc3
EVO LONGSPAN TOPHAT DETAIL TO UC COLUMN
EXPLODED VIEW MIN. STEEL BEARING FACE 140mm HORIZONTAL PANEL JOINT
DESCRIPTION
EVO LONGSPAN TOPHAT DETAIL
TO UC COLUMN
ASSEMBLED VIEW MIN. STEEL BEARING FACE 140mm
APPROVED BY DATE REVISION
JS 18.03.19 -
G:\Technical\1-current\Drawings\current 2013 Q1\EVO Wall Horizontal\KS1000 EVO Wall Horizontal_ Q1 2019.dwg, 7/08/2019 3:04:59 p.m., AutoCAD PDF (High Quality Print).pc3
EVOLUTION RECESS TOPHAT DETAIL TO RHS COLUMN
SYSTEM
KS1000 EVO WALL HORIZONTAL_ Q1 2019
DESCRIPTION
EVOLUTION RECESS TOPHAT
DETAIL TO RHS COLUMN
EVOLUTION RECESS WALL PANEL This document remains the property of Kingspan Ltd under
copyright laws. Licence is granted to use this document and
HORIZONTALLY LAID its contents in connection with Kingspan Ltd products only.
©Kingspan Ltd
G:\Technical\1-current\Drawings\current 2013 Q1\EVO Wall Horizontal\KS1000 EVO Wall Horizontal_ Q1 2019.dwg, 7/08/2019 3:05:00 p.m., AutoCAD PDF (High Quality Print).pc3
EVO WALL FACE ALIGNED WITH CONCRETE
SYSTEM
KS1000 EVO WALL HORIZONTAL_ Q1 2019
DESCRIPTION
EVO WALL FACE ALIGNED WITH CONCRETE
G:\Technical\1-current\Drawings\current 2013 Q1\EVO Wall Horizontal\KS1000 EVO Wall Horizontal_ Q1 2019.dwg, 7/08/2019 3:05:01 p.m., AutoCAD PDF (High Quality Print).pc3
EVO WALL FACE FIXED OVER CONCRETE
0.5mm COIL COATED STEEL END
FLASHING SEALED TO PANEL WITH
6x4mm BUTYL SEALANT.
CONTINUOUS RUN OF
GUN GRADE SEALANT
SYSTEM
KS1000 EVO WALL HORIZONTAL_ Q1 2019
DESCRIPTION
EVO WALL FACE FIXED OVER CONCRETE
G:\Technical\1-current\Drawings\current 2013 Q1\EVO Wall Horizontal\KS1000 EVO Wall Horizontal_ Q1 2019.dwg, 7/08/2019 3:05:01 p.m., AutoCAD PDF (High Quality Print).pc3
EVO WALL EAVES GUTTER
SYSTEM
KS1000 EVO WALL HORIZONTAL_ Q1 2019
DESCRIPTION
GUTTER BRACKET ATTACHED TO PAINTED EVO WALL EAVES GUTTER
G:\Technical\1-current\Drawings\current 2013 Q1\EVO Wall Horizontal\KS1000 EVO Wall Horizontal_ Q1 2019.dwg, 7/08/2019 3:05:02 p.m., AutoCAD PDF (High Quality Print).pc3
OVERHANGING EAVES GUTTER
75mm EAVES OVERHANG
ADDITIONAL TREATMENT REQUIRED IF
CLOSED CELL FOAM UNDERSIDE OF PANEL IS EXPOSED
EAVES FILLER BLOCK
KINGSPAN KS1000 RW
ROOFING PANEL
FIXING AT CROWN
INTERNAL FLASHING
SITE APPLIED GUN GRADE
SEALANT EAVES SEAL
FILL GAPS WITH FR
EXTERNAL FLASHING FOAM FILLER
CONTINUOUS RUN OF
6x4mm BUTYL SEALANT
PRESSED STEEL GUTTER
FLASHING TO SUIT LINER
FLASHING TO SUIT EXT MATERIAL. CUT AROUND
GUTTER BRACKET ATTACHED TO MATERIAL. CUT AROUND STRUCTURE AS NECESSARY.
FASCIA BOARD FIXED TO PURLINS STRUCTURE AS NECESSARY.
SYSTEM
KS1000 EVO WALL HORIZONTAL_ Q1 2019
KINGSPAN KS1000 EVO This document remains the property of Kingspan Ltd under
copyright laws. Licence is granted to use this document and
PANEL HORIZONTALLY LAID its contents in connection with Kingspan Ltd products only.
©Kingspan Ltd
G:\Technical\1-current\Drawings\current 2013 Q1\EVO Wall Horizontal\KS1000 EVO Wall Horizontal_ Q1 2019.dwg, 7/08/2019 3:05:03 p.m., AutoCAD PDF (High Quality Print).pc3
EVO WALL PARAPET GUTTER
INFILL BLOCK
5° min
FILL GAPS WITH CANISTER
FR FOAM FILLER
DESCRIPTION
EVO WALL PARAPET GUTTER
G:\Technical\1-current\Drawings\current 2013 Q1\EVO Wall Horizontal\KS1000 EVO Wall Horizontal_ Q1 2019.dwg, 7/08/2019 3:05:04 p.m., AutoCAD PDF (High Quality Print).pc3
EVO WALL PARAPET VERGE
6 min
STITCHING SCREWS OR SEALED RIVETS SYSTEM
KS1000 EVO WALL HORIZONTAL_ Q1 2019
DESCRIPTION
EVO WALL PARAPET VERGE
G:\Technical\1-current\Drawings\current 2013 Q1\EVO Wall Horizontal\KS1000 EVO Wall Horizontal_ Q1 2019.dwg, 7/08/2019 3:05:05 p.m., AutoCAD PDF (High Quality Print).pc3
PARAPET VERGE WITH PANEL BEARER
6 min
SCREWS OR SEALED RIVETS CONTINUOUS RUN OF
6x4mm BUTYL SEALANT
10
5
SYSTEM
KS1000 EVO WALL HORIZONTAL_ Q1 2019
DESCRIPTION
PARAPET VERGE WITH PANEL BEARER
G:\Technical\1-current\Drawings\current 2013 Q1\EVO Wall Horizontal\KS1000 EVO Wall Horizontal_ Q1 2019.dwg, 7/08/2019 3:05:06 p.m., AutoCAD PDF (High Quality Print).pc3
EVO WALL VERGE DETAIL (RW MALE EDGE)
"Z" FLASHING WITH CONTINUOUS 0.5mm COIL COATED VERGE FLASHING WITH
RUNS OF 6x4mm BUTYL SEALANT 150mm SEALED OVERLAP OR BUTT-STRAPS
DESCRIPTION
CONTINUOUS RUN OF EVO WALL VERGE DETAIL (RW MALE EDGE)
G:\Technical\1-current\Drawings\current 2013 Q1\EVO Wall Horizontal\KS1000 EVO Wall Horizontal_ Q1 2019.dwg, 7/08/2019 3:05:07 p.m., AutoCAD PDF (High Quality Print).pc3
EVO WALL VERGE DETAIL (RW FEMALE EDGE)
SYSTEM
CONTINUOUS RUN OF KS1000 EVO WALL HORIZONTAL_ Q1 2019
6x4mm BUTYL SEALANT
DESCRIPTION
EVO WALL VERGE DETAIL (RW FEMALE EDGE)
KINGSPAN KS1000 EVO CONTINUOUS WELDED STEEL FIXING APPROVED BY DATE REVISION
PANEL HORIZONTALLY LAID PLATE BY STEEL CONTRACTOR JS 18.03.19 -
G:\Technical\1-current\Drawings\current 2013 Q1\EVO Wall Horizontal\KS1000 EVO Wall Horizontal_ Q1 2019.dwg, 7/08/2019 3:05:08 p.m., AutoCAD PDF (High Quality Print).pc3
EVO WALL SKILLION DETAIL (PANEL BEARER)
SYSTEM
KS1000 EVO WALL HORIZONTAL_ Q1 2019
DESCRIPTION
EVO WALL SKILLION DETAIL (PANEL
BEARER)
FILL GAPS WITH FR
FOAM FILLER APPROVED BY DATE REVISION
JS 18.03.19 -
FIXING AT PAN
New Zealand: Kingspan Ltd
97 Montreal St
Christchurch
Tel: +64 (3) 260 5530
Fax: +64 (3) 260 5539
INTERNAL FLASHING WITH 150mm Freephone: 0800 121280
email: info@kingspanpanels.co.nz
SEALED OVERLAP OR BUTT-STRAPS www.kingspanpanels.co.nz
G:\Technical\1-current\Drawings\current 2013 Q1\EVO Wall Horizontal\KS1000 EVO Wall Horizontal_ Q1 2019.dwg, 7/08/2019 3:05:09 p.m., AutoCAD PDF (High Quality Print).pc3
KS1000 EVO WALL HORIZONTAL TO VERTICAL
STACK JOINT DETAIL (PANEL BEARER)
SYSTEM
KS1000 EVO WALL HORIZONTAL_ Q1 2019
DESCRIPTION
KS1000 EVO WALL HORIZONTAL TO
VERTICAL STACK JOINT DETAIL
(PANEL BEARER)
G:\Technical\1-current\Drawings\current 2013 Q1\EVO Wall Horizontal\KS1000 EVO Wall Horizontal_ Q1 2019.dwg, 7/08/2019 3:05:09 p.m., AutoCAD PDF (High Quality Print).pc3
KS1000 EVO WALL SEISMIC JOINT DETAIL
SYSTEM
KS1000 EVO WALL HORIZONTAL_ Q1 2019
DESCRIPTION
KS1000 EVO WALL SEISMIC JOINT DETAIL
G:\Technical\1-current\Drawings\current 2013 Q1\EVO Wall Horizontal\KS1000 EVO Wall Horizontal_ Q1 2019.dwg, 7/08/2019 3:05:10 p.m., AutoCAD PDF (High Quality Print).pc3
EVO WALL: INTEGRATED HORIZONTAL WINDOW DETAIL - 50MM ONLY
(VERTICAL SECTION)
(1) 1
SYSTEM
KS1000 EVO WALL HORIZONTAL_ Q1 2019
FIRE RATED CANISTER INSULATION
DESCRIPTION
EVO WALL: INTEGRATED HORIZONTAL
WINDOW DETAIL - 50mm ONLY
(VERTICAL SECTION)
KS1000 EVO PANEL HORIZONTALLY LAID This document remains the property of Kingspan Ltd under
copyright laws. Licence is granted to use this document and
its contents in connection with Kingspan Ltd products only.
G:\Technical\1-current\Drawings\current 2013 Q1\EVO Wall Horizontal\KS1000 EVO Wall Horizontal_ Q1 2019.dwg, 7/08/2019 3:05:11 p.m., AutoCAD PDF (High Quality Print).pc3
EVO WALL PANEL: INTEGRATED HORIZONTAL WINDOW SECTION DETAIL - 50MM ONLY
(3) (4)
WINDOW JAMB FRAME
FILL GAPS WITH PIR
FOAM BLOCKS
DESCRIPTION
EVO WALL PANEL: INTEGRATED
HORIZONTAL WINDOW SECTION DETAIL
- 50mm ONLY
3 3 4 4 ©Kingspan Ltd
G:\Technical\1-current\Drawings\current 2013 Q1\EVO Wall Horizontal\KS1000 EVO Wall Horizontal_ Q1 2019.dwg, 7/08/2019 3:05:12 p.m., AutoCAD PDF (High Quality Print).pc3
SITE CUT PANEL DETAIL
DIMENSION AS REQUIRED
SITE CUT PANEL
SYSTEM
DRIP FLASHING KS1000 EVO WALL HORIZONTAL_ Q1 2019
DESCRIPTION
SITE CUT PANEL DETAIL
COVER STRIP TO CONCEAL SITE CUT PANEL EDGE IF RIVET FIX APPROVED BY DATE REVISION
JS 18.03.19 -
REQUIRED (CUT BACK TO SHOW FLAT HEAD FASTENER)
DRG REF: SCALE SHEET PAPER SIZE
EVO_HS_24 NTS 32 A4
G:\Technical\1-current\Drawings\current 2013 Q1\EVO Wall Horizontal\KS1000 EVO Wall Horizontal_ Q1 2019.dwg, 7/08/2019 3:05:13 p.m., AutoCAD PDF (High Quality Print).pc3
EVO WALL WINDOW DETAIL (BASE CHANNEL)
6 min
0.5mm COIL COATED HEAD FLASHING
SEALED WITH 6x4mm BUTYL SEALANT
WINDOW SUPPORT
FRAME
DESCRIPTION
EVO WALL WINDOW DETAIL (Base
Channel)
G:\Technical\1-current\Drawings\current 2013 Q1\EVO Wall Horizontal\KS1000 EVO Wall Horizontal_ Q1 2019.dwg, 7/08/2019 3:05:14 p.m., AutoCAD PDF (High Quality Print).pc3
EVO WALL WINDOW DETAIL (HORIZONTAL SECTION)
SYSTEM
KS1000 EVO WALL HORIZONTAL_ Q1 2019
G:\Technical\1-current\Drawings\current 2013 Q1\EVO Wall Horizontal\KS1000 EVO Wall Horizontal_ Q1 2019.dwg, 7/08/2019 3:05:14 p.m., AutoCAD PDF (High Quality Print).pc3
EVO WALL PERSONNEL DOOR DETAIL (PANEL BEARER)
6 min
0.5mm COIL COATED HEAD FLASHING
SEALED WITH 6x4mm BUTYL SEALANT
SYSTEM
KS1000 EVO WALL HORIZONTAL_ Q1 2019
DESCRIPTION
DOOR UNIT BY OTHERS EVO WALL PERSONNEL DOOR DETAIL
(PANEL BEARER)
KS1000 EVO WALL PANEL DRG REF: SCALE SHEET PAPER SIZE
EVO_HS_26 1:5 35 A4
HORIZONTALLY LAID
G:\Technical\1-current\Drawings\current 2013 Q1\EVO Wall Horizontal\KS1000 EVO Wall Horizontal_ Q1 2019.dwg, 7/08/2019 3:05:15 p.m., AutoCAD PDF (High Quality Print).pc3
EVO WALL OVER HEAD DOOR DETAIL (PANEL BEARER)
SYSTEM
KS1000 EVO WALL HORIZONTAL_ Q1 2019
DESCRIPTION
EVO WALL OVER HEAD DOOR DETAIL
(Panel Bearer)
G:\Technical\1-current\Drawings\current 2013 Q1\EVO Wall Horizontal\KS1000 EVO Wall Horizontal_ Q1 2019.dwg, 7/08/2019 3:05:16 p.m., AutoCAD PDF (High Quality Print).pc3
EVO WALL INTEGRATED LOUVRE DETAIL
SYSTEM
KS1000 EVO WALL HORIZONTAL_ Q1 2019
DESCRIPTION
EVO WALL INTEGRATED LOUVRE
DETAIL
G:\Technical\1-current\Drawings\current 2013 Q1\EVO Wall Horizontal\KS1000 EVO Wall Horizontal_ Q1 2019.dwg, 7/08/2019 3:05:17 p.m., AutoCAD PDF (High Quality Print).pc3
EVO WALL PENETRATION DETAIL PIPE/DUCTING "DEKTITE" FLEXIBLE PIPE FLASHING OR
SIMILAR TO SUIT CONDITIONS.
STANDARD TEMPERATURE
SYSTEM
INTERNAL COVER FLASHING SEALED KS1000 EVO WALL HORIZONTAL_ Q1 2019
3000mm
POSITIONS
7mm
44mm
39mm
SYSTEM
KS1000 EVO WALL HORIZONTAL_ Q1 2019
DESCRIPTION
EVO WALL BASE CHANNEL SUPPORT
*DIM A DETAIL
100 EVO 71mm BC 100 JOINTED. Tel: +64 (3) 260 5530
Fax: +64 (3) 260 5539
140 EVO 111mm BC 140 MATERIAL : 1.6mm THICK GALVANIZED STEEL Freephone: 0800 121280
email: info@kingspanpanels.co.nz
www.kingspanpanels.co.nz
G:\Technical\1-current\Drawings\current 2013 Q1\EVO Wall Horizontal\KS1000 EVO Wall Horizontal_ Q1 2019.dwg, 7/08/2019 3:05:19 p.m., AutoCAD PDF (High Quality Print).pc3
EVO WALL PANEL BEARER DETAIL
150 SYSTEM
KS1000 EVO WALL HORIZONTAL_ Q1 2019
A-A
.
DESCRIPTION
9.5
27.5
0° 0°
44.5
44.5
17
6
SECTION A-A (80mm EVO) SECTION A-A (50mm EVO) ALL DIMENSIONS IN MILLIMETRES its contents in connection with Kingspan Ltd products only.
©Kingspan Ltd
PANEL BEARER FIXING CENTRES 1500 mm MAX
ONE NUMBER PANEL BEARER LOCATED AT EACH END OF PANEL DO NOT SCALE. IF IN DOUBT ASK
G:\Technical\1-current\Drawings\current 2013 Q1\EVO Wall Horizontal\KS1000 EVO Wall Horizontal_ Q1 2019.dwg, 7/08/2019 3:05:20 p.m., AutoCAD PDF (High Quality Print).pc3
EVO WALL RECESSED WASHER DETAIL (RECW09G)
SYSTEM
KS1000 EVO WALL HORIZONTAL_ Q1 2019
DESCRIPTION
EVO WALL RECESSED WASHER
DETAIL (RECW09G)
G:\Technical\1-current\Drawings\current 2013 Q1\EVO Wall Horizontal\KS1000 EVO Wall Horizontal_ Q1 2019.dwg, 7/08/2019 3:05:22 p.m., AutoCAD PDF (High Quality Print).pc3