Professional Documents
Culture Documents
3 Way Lamp
3 Way Lamp
Contents
1Three-way bulbs
2Three-way sockets
33-way, 2-circuit switches
4Wiring a 3-way lamp
5Lamps with night lights
6See also
7References
Three-way bulbs[edit]
A 3-way incandescent bulb has two filaments designed to produce different amounts of light.
The two filaments can be activated separately or together, giving three different amounts of light. A
typical 3-way incandescent bulb is a 50 W / 100 W / 150 W bulb. It has a low-power 50 W filament
and a medium-power 100 W filament. When they are both energized at the same time, 150 W of
power is delivered, and a high level of light is produced. Usually screw-base 3-way bulbs fit into
regular Type A sockets (E26D after ISO 60061-1:2014). Larger 3-way bulbs (up to 300 W) have a
larger "mogul" base (E39D). These 3 way bulbs can also come in spiral designs. [3]
Some compact fluorescent lamps have similar circuitry to produce the different amounts of light.
Circuit diagram of a 3-way bulb.
Three-way sockets[edit]
A standard screw lamp socket has only two electrical contacts. In the center of the bottom of a
standard socket is the hot contact (contact one in photo), which typically looks like a small metal
tongue bent over. The threaded metal shell is itself the neutral contact (contact three in photo).
When a standard bulb is screwed into a standard socket, a matching contact on the bottom of the
bulb presses against the metal tongue in the center of the socket, creating the live connection. The
metal threads of the bulb base touch the socket shell, which creates the neutral connection, and this
is how the electrical circuit is completed.
A 3-way socket has three electrical contacts. In addition to the two contacts of the standard socket, a
third contact is added. This contact is positioned off-center in the bottom of the socket (contact two
in photo). This extra contact matches a ring-shaped contact on the bottom of a 3-way bulb, which
creates the connection for the second filament inside the bulb. A problem of these devices is that the
ring contact of the socket (contact two in photo) digs into the lead seal on the lamp bulb's contact
ring and this connection tends to fail early (sometimes in months), leading to intermittent flashes,
popping noises, and loss of power to the low wattage filament as the lead seal on the bulb's ring
alternately melts and solidifies.
The center contact of the bulb typically connects to the medium-power filament, and the ring
connects to the low-power filament. Thus, if a 3-way bulb is screwed into a standard light socket that
has only a center contact, only the medium-power filament operates. In the case of the 50 W / 100
W / 150 W bulb, putting this bulb in a regular lamp socket will result in it behaving like a normal
100W bulb.
A 3-way socket that is to be wired to a separate 3-way 2-circuit switch, is called a "keyless 3-way
socket." This would be typical in a 3-way floor-standing torchiere lamp. A "keyed 3-way socket" has
the switch incorporated in the lamp socket and requires no external wiring between switch and
socket.
The switch used to control a 3-way lamp is usually a rotary switch or a pull-chain switch. Although it
is referred to as a 3-way switch, it has four positions, off, lamp one (low), lamp two (medium), and
lamps one and two (high). When properly connected to a 3-way socket containing a 3-way bulb, this
switch will first power one filament, then the other filament, then both, then return to the off position.
To do this, the switch must be capable of operating two different circuits. Internal to the switch there
are two sets of switch contacts that are not connected electrically, but which are connected
mechanically in such a way that they operate together as shown in this table.
Wiring a 3-way lamp is a simple matter of connecting the 3-way switch's two switched live wires
(frequently red for the low-wattage circuit and blue for the medium-wattage circuit) from the switch to
the two live terminals on the 3-way socket. The lamp's power cord must be connected so that the
wire from the wide blade on the power cord plug (neutral) connects to the neutral terminal on the
socket, and the wire from the narrow blade on the plug (hot) connects to the black wire on the
switch.
See also[edit]
3-way switching
References[edit]
1. ^ Patent: Incandescent Lamp, retrieved 2017 March 11
2. ^ Ed Covington, The 2-Filament 3-Way Incandescent Lamp, retrieved 2013 March 12
3. ^ 1 Light Bulbs, 3-Way Incandescent Bulbs, retrieved 2014 January 24