Copyright 1991, 2008 Caterpillar Inc. All Rights Reserved.
Page 1 of 1 1KM 938F WHEEL LOADER Testing & Adjusting Media Number SENR3583-09 Publication Date 2002/01/01 Update Date 2002/01/11
High Idle Adjustment
The high idle screw (4) is initially set on the 1U-7326 Governor Calibration Bench. Final high idle adjustment is set while the governor is mounted on the engine. When the engine is at full throttle and no load, loosen the locknut and adjust screw (4) to the specified high idle speed. Tighten the locknut and then recheck the high idle setting.