Professional Documents
Culture Documents
9TH OCT,19
DIGITIZING PROCESS
AccuMark is used to digitize the garment pattern, grading and marker
making. Digitizing is a process of adding details of a pattern or slope
into the computer. The pattern making is done by the notch type, grading
rules, sizes to be produced. Other 2 hardware used with Gerber for this
purpose are plotter and digitizer.
There are multiple steps through which you can achieve successful
pattern.
STEP 1
Open Launch pad and go to Hardware Configuration.
Make sure the port in digitizing is set to COM 1, apply the settings
and open digitizer screen.
STEP 2
Paste your pattern on digitizing table.
STEP 3:
Go to your PC and verify piece in Digitizer
Check piece in Digi
Open PDS