Professional Documents
Culture Documents
Performance in zone 2
Performance in zone 3 Fast set
Early strengths
Rapid hardening Good size variation
Quick drying control
Excellent size
variation control
Performance in zone 1
Fast set
TERNAL® SE has been designed to formulate mortars in the zones of composition 1 and 2. Its dosage
will vary according to the drymix mortar technical requirements set by the application.
The best performance will result from the co-addition of calcium sulfate and fine adjustments with
classical additives.
As with all Calcium Aluminate from the TERNAL® range, excellent performance is also
achieved when formulating according to composition in zone 3.
Performance in typical special mortars
ADJUSTABLE 4.50
FAST SET Calcium sulfate anhydrite 1.50
AND EARLY Portland cement 14.00
STRENGTHS Silica AFNOR sand 0-2mm 79.92
Accelerators 0.08
TOTAL 100.00
RAPID HARDENING
> CONCRETE PATCH
% Strength development of a rapid hardening
concrete patch at 23°C
6.5
Portland cement 8.5
Calcium sulfate anhydrite 3.5
RAPID
HARDENING Silica sand 0-8mm 80.97
®
CONCRETE Peramin CONPAC 149S 0.08
PATCH Accelerators 0.1
Retarders 0.35
TOTAL 100
> ROAD REPAIR MORTAR % Rapid repair mortar at 5°C and 20°C
(cubes 10x10x10cm)
9.50
Portland cement 23.70
ULTRAFAST Calcium sulfate anhydrite 3.00
ROAD REPAIR Silica sand 52.00
MORTAR Limestone filler 10.00
(1H RETURN Hydrated lime 1.20
TO TRAFFIC)
Accelerators 0.15
Retarders 0.05
Peramin® SMF 20 0.30
®
Peramin DEFOAM 50 PE 0.10
TOTAL 100.00
> RAPID HARDENING MORTAR % Set time and strength development of a rapid
hardening mortar based on TERNAL® SE at 5°C
5.00 and 20°C
RAPID
Calcium sulfate hemihydrate 2.00
HARDENING
MORTAR WITH Portland cement 23.00
> China
Kerneos (China) Aluminate
02