Professional Documents
Culture Documents
Certificate No.:
i
CERTIFICATE FOR
OFFSHORE CONTAINER
Part 1
Offshore Container Type:
Manufacturer:
Production testing
This offshore container, or another offshore contai ner from the same fabrication series, has been subj ected to the following proof test:
Manufacturer’s serial No. of the offshore container (s) tested: Total test load (2,5R): Test date:
Min. shackle bolt diameter: Max. angle of legs (fro m ve rtic a l) : E nha nc e me nt fa c tor:
This Offshore Container has been designed, approved , manufactured and tested in accordance with Det No rske Veritas Standard for
Certification no. 2.7-1 Offshore Containers.
The container also complies with the following requ irements and regulations:
- IMO MSC/Circ.860
-
Remarks
This field need only be filled in when the certific ate is prepared by a manufacturer
with an MSA agreement with DNV.
Place:
Date:
Place: (Name)
Surveyor
If any person suffers loss or damage which is prove d to have been caused by any negligent act or omiss ion of Det Norske Veritas, then Det Norske Veritas shall pay compensation to such person for his prove d direct loss or damage.
However, the compensation shall not exceed an amoun t equal to ten times the fee charged for the servic e in question, provided that the maximum compensati on shall never exceed USD 2 million.
In this provision "Det Norske Veritas" shall mean t he Foundation Det Norske Veritas as well as all its subsidiaries, directors, officers, employees, agen ts and any other acting on behalf of Det Norske Ver itas.
D ET N ORSKE V ERITAS AS, Veritasveien 1, NO-1322 Høvik, Norway, Telephone: + 47 67 57 99 00, Telefax: +47 67 57 99 11, Org.No. N O 945 748 931 MVA
Form No.: 49.07a Issue: July 2008 Page 1 of 2