Professional Documents
Culture Documents
TiAl6V4
Designation
Al V Mo Zr Sn Cu N O2 Fe C Ti Impurities
5.50…6.75 3.50…4.50 <0.05 <0.20 <0.40 <0.08 >87.7. max. 0.40
Euronorm ISO
France United Kingdom
T - A6V AIR 9183 TA 10, 11, 12, 13, 28, 56 BS TA 10, 11, 12, 13, 28, 56
Japan Russia
VT 6
USA
AMS ASTM UNS
4981 Grade 23 Grade 5 B 265, B 337 R.56400
Grade 29 Grade 5 B 338, B 348 R 56401
Grade 5 B 363, B 381
It should be noted that the chemical composition applied in the table is not identical in all other national
standards.
Flow curves
Fig. 4.12. TiAl6V4. Plasticity as a function of temperature. Initial state of test specimen: deformed.
Physical properties
Bibliography
Poluchin, P.I., Balcugov, B.A., Galkin, A.M.: Metallurgiya (1976) 81–84.
Semiatin, S.L., Lark, K.A., Barker, R.D., Seetharaman, V., et al: Metall. Trans. A 23 (1992) 295.
Sagar, P.K., Banerjee, D., Muraleedharan, K., Prasad, Y.V.R.K.: Metall. Trans. A 27 (1992) 2593.
Lin, M.-T.: J. Mater. Proc. Technol. 71 (1997) 235–246.
Kubiak, K.: Plasticity of Titanium and its Alloys, in: Schindler, I., Hadasik, E.: Deformation Behavior
and Properties of Selected Metallic Materials, Gliwice, 2007, p. 191–218.
Szkliniarz, W.: Working and Properties of TiAl Intermetallic Alloys, in: Schindler, I., Hadasik, E.:
Deformation Behavior and Properties of Selected Metallic Materials, Gliwice, 2007, p. 219–242.
Ghosh, A.K., Hamilton, C.H.: Mechanical Behavior and Hardening Characteristics of Superplastic
Ti-6Al-4V; Metall. Trans. A 10 (1979) 699–706.
Cui, W.F., Jin, Z., Guo, A.H., Zhou, L.: Mater. Sci. Eng. Part A 499 (2009) 252–256.
Warchomicka, F., Stockinger, M., Degischer, H.-P.: Proc. World Conf. Titanium 11 (2007) 511–514.
Bystrzanowski, S., Bartels, A., Clemens, H., Gerling, R.: Intermetallics 16 (2008) 717–726.
Lee Woei Shyan, Chen Tao Hsing, Hwang Hsin Hwa: Metallurg. Mater. Trans. A / Physical Metallurg.
Mater. Sci. A 39 (2008) 1435–1448.
Ko Young Gun, Lee Chong Soo, Shin Dong Hyuk: Scr. Mater. 58 (2008) 1094–1097.
Reddy, N.S., Park, C.H., Lee, Y.H., Lee, C.S.: Mater. Sci. Technol. 24 (2008) 294–301.
Colin, A., Mineur, M., Desrayaud, Ch., Montheillet, F.: Mater. Sci. Forum 539/543 (2007) 3661–3666.
Li, Z.Q., et al.: Mater. Sci. Forum 551/552 (2007) 591–596.
Liang Xiabo, Li Shiqiong, Zhang Jianwei, Cheng Yunjun: Mater. Sci. Forum 546/549 (2007)
1461–1466.
Molenat, G., Thomas, M., Galy, J., Couret, A.: Adv. Eng. Mater. 9 (2007) 667–669.
Imayev, V., Imayev, R., et al.: Scr. Mater. 57 (2007) 193–196.
El-Magd, E., Treppmann, C., Korthäuser, M.: Int. J. Mater. Res. / Z. Metallkd. 97 (2006) 1453–1459.
Kim, J.H., Semiatin, S.L., Lee, Chong Soo: Mater. Sci. Technol. 19 (2003) 1648–1652.
Kim, J.H., Semiatin, S.L., Lee, Chong Soo: Acta Mater. 51 (2003) 5613–5626.
Kim, J.H., Semiatin, S.L., Lee, Chong Soo: Mater. Sci. Forum 475–479 (2005) 2965–2968.
Semiatin, S.L., Seetharaman, V., Weiss, I.: Mater. Sci. Eng. Part A 243 (1998) 1–24.
Ezugwu, E.O., Wang, Z.M.: J. Mater. Proc. Technol. 68 (1997) 262–274.
Leyens, Ch., Peters, M.: Titanium and Titanium Alloys, Weinheim: WILEY-VCH, 2003.
Barthels, A., Kestler, H., Clemens, H.: Mater. Sci. Eng. Part A 329–331 (2002) 153–162.
Möllmann, M.: Conference Paper, MEFORM 1999, Proceedings, Freiberg: Institut für Metallformung
der TU BA, 1999, Paper Nr.12, 10 pages.
Borziak, A.N., Lepeskin, I.I., et al.: Physikalisch-mechanische und wärmephysikalische Eigenschaften
von Metallen, Moskva: Izdat. Nauka, 1976, p. 59–80.
Novikova, S.I.: Wärmeausdehnung von Festkörpern, Moskva: Izdat. Nauka, 1974, p. 292.
Peter, A.: Handbuch Spannungsmesspraxis. Experimentelle Ermittlung mechanischer Spannungen,
Braunschweig, Wiesbaden: Vieweg & Sohn Verlagsgesellschaft, 1992.
Spittel, T., Spittel, M.: Proc. Conf. MEFORM 2001, Freiberg: TU Bergakademie, 2001, p. 123–136.
Heiligenstaedt, W.: Wärmetechnische Rechnungen für Industrieöfen, 3. Auflage, Düsseldorf: Verlag
Stahleisen, 1951.
Böhler: Edelstahl-Handbuch, Kapfenberg: Böhler GmbH.