OHIO MODEL MST
AUTO/MANUAL DROP MAGNET CONTROLLER
INSTALLATION, MAINTENANCE, AND PARTS BULLETIN
OPERATING RANGE 21-50 AMPS (COLD MAGNET CURRENT)
DESCRIPTION
The MST Controller is @ heavy duty magnet controller used for
‘magnets from 50 amps down to 21 amps cold current. Tho MST
controller uses many parts interchangeable with both higher
‘and lower range controllers for lower inventory costs.
‘Automatic Drop
‘Tae sno reverse current adjustment: The amount of reverse
Ciientis automaticaly ajustd or ash, clean drop of soap
INSTALLATION PROCEDURES
‘material with one movement of the master switch or push button,
Manual Drop
Allows for partial dropping ofthe load by controlling the amount
of reverse current to the magnet, A drop position on the master
‘switch or a push button that is spring returned to off, gives the
‘operator complete control of the drop cycle.
‘* Mount the controller to a solid surface with the mounting
bars provided.
+ The controller must be mounted vertically with the “TOP”
Lup to operate properly
‘+ Mount the controlier away from sources of heat and direct
exhaust of engines.
* Allow enough room around the controller for air circulation.
* Route electrical wires through bottom of the enclosure and
Connect securely to the terminals.
* All electrical circuits must be free from grounds and shorts.
+ Remove shipping material from the arc shields before
‘operating the controler.
* Controller is polarity sensitive. The positive line must be
connected to L+ and the negative line to L~ to ensure
proper operation.MST SUBASSEMBLIES
Sieve
44 FE] 01851478A
CB
Creralea 24) o18a1508D Ey kd 018A2673A
evens
We 2! IEA _01882966sAE
OHIO MODEL MST AUTO/MANUAL DROP MAGNET CONTROLLER
MST CONTROLLER
EXPLODED ASSEMBLY VIEW
HAROWARE SPECIFICATIONS LIST
|MST WIRING DIAGRAM
MST AUTOMATIC
WiRING DIAGRAM
MST MANUAL
WIRING DIAGRAM
kh ‘SCHEMATIC DIAGRAM Shi |
ave. RENEW T > scnemaric biacran sourmou.tn rave ne
4
oat
4 aE j