7 CONNECTIONS
You will need a lot of cables for different purposes - see the following figures to make sure you have
got the right ones.
All outputs are ground-compensated (decoupled from the mains supply earth) to eliminate the
possibility of ground loops. Unbalanced equipment may be connected to balanced inputs/outputs.
Either use mono 1/4" jacks or connect ring and barrel of TRS jacks.
Phantom power (+48 V DC) is provided. This can be switched on or off by the +48 V Phantom switch
(81).
Care should be taken NOT to plug mics into the console (or stagebox) while the phantom power is on.
Also, mute the monitor/PA speakers when turning phantom power on or off. Allow 1 minute after
powering up for the system to equilibrate before setting input gains.
Headphones Inserts
tee t=
itr signat Send (out)
GR signal return (a) eS
sleeve
{round / screen
tp
:——4
fg
sleeve sleove a=}
strain eet came strain rebel camp =
In-/ Outputs
Incl, Aux Sends Retums
tox
nat (ove)
208
steove =
‘round / screen |
Mic Inputs
7 all 1 = grounds screen 2 9 4
oom 2=not(+) fe) he)
sieeve ——____1j
3 scold) 3
san raat clamp = 0
For unbalanced use connect ring and For unbalanced use
Sleeve (or use 1/4" mono TS plugs) ‘connect pins 1 and 3