Professional Documents
Culture Documents
Ads by Google Skin Facial Body Shape Tutorials ZBrush Female Body
Search Search
• Details:
• Author:Fabio Bautista
• Skill Level:Advanced
• Techniques:Modeling
• Used Software:ZBrush, 3ds Max, Photoshop
• Completion Time:5 hours
• Rating:
www.FullSail.edu
Ads by Google
CONCEPT
This project started as an entry for a Sculpting Challenge. The brief of the challenge was to create a female amazon warrior and I thought about doing
something with the proportions of comic book characters, a tall young woman with slender figure but at the same time looking like a strong warrior.
So first task was to gather references and Google’s image search was great for this. Amazon warrior and native women images were my primary
research goal. This gave me some ideas for the design of the character.
http://www.3dm3.com/articles/making-of-amazon-warrior-3277/ 3/30/2011
Making of Amazon Warrior | 3DM3 - Tutorials | Making ofs | Articles | Videos Tutorials Page 2 of 11
(Fig. 01).
I used the same method for the hair, but it was created as an independent Subtool. An important thing to note here is that by creating separate objects,
the memory resources are used in a better way. This give you the possibility to increase the subdivision of each object much more than using the whole
model. Thus, each subtool can have a different subdivision level and you can work with a greater level of detail on objects that need it.
After getting the overall shape, I increased the level of subdivision and began to adjust the overall details of the body. For this task I used mostly Move
and Standard. Later I added a subdivision more to refine each area of the body. Here, I used the Standard, Clay and Smooth brushes. Then I divided the
http://www.3dm3.com/articles/making-of-amazon-warrior-3277/ 3/30/2011
Making of Amazon Warrior | 3DM3 - Tutorials | Making ofs | Articles | Videos Tutorials Page 3 of 11
model one more time to get more definition on the face and chest (Fig. 02).
When I was happy with the shape I exported a version of this early model to Max to optimize and retopologize. There I adjusted the distribution of
geometry and created the base mesh for the accessories starting from primitive objects. Finally I exported the model with clothes and accessories to
ZBrush (Fig. 03).
http://www.3dm3.com/articles/making-of-amazon-warrior-3277/ 3/30/2011
Making of Amazon Warrior | 3DM3 - Tutorials | Making ofs | Articles | Videos Tutorials Page 4 of 11
The same process was used to give shape to the other parts of the body, this time I focused on areas like the torso, hands, knees and feet, but without
adding too much detail or skin imperfections, for a smooth and soft look (Fig. 05).
http://www.3dm3.com/articles/making-of-amazon-warrior-3277/ 3/30/2011
Making of Amazon Warrior | 3DM3 - Tutorials | Making ofs | Articles | Videos Tutorials Page 5 of 11
After this, I went up one level of division more and continued refining the face, giving some more details (like in the hair, eyebrows and lips) and then
working in the same way with the rest of the body (Fig. 06).
Clothing was the next step. I divided it to five levels of subdivision and added some small details to clothing and the other accessories (Fig. 07).
As for the hair I paid special attention first to define locks of hair to add some fluency and dynamism. For this I used the SnakeHook brush to create the
tips and give shape. Then I used a customized brush created from the Standard brush, to block in and define the layers of hair. To complete this
http://www.3dm3.com/articles/making-of-amazon-warrior-3277/ 3/30/2011
Making of Amazon Warrior | 3DM3 - Tutorials | Making ofs | Articles | Videos Tutorials Page 6 of 11
process, I added details on the hair using alphas and Lazy Mouse mode (Fig. 08).
http://www.3dm3.com/articles/making-of-amazon-warrior-3277/ 3/30/2011
Making of Amazon Warrior | 3DM3 - Tutorials | Making ofs | Articles | Videos Tutorials Page 7 of 11
At the end of the sculpting process, the model was at level six of subdivisiуn and already had all the detail that I wanted. It was ready for the last step.
(Fig. 09)
http://www.3dm3.com/articles/making-of-amazon-warrior-3277/ 3/30/2011
Making of Amazon Warrior | 3DM3 - Tutorials | Making ofs | Articles | Videos Tutorials Page 8 of 11
With this low poly mesh, the task of posing the whole model was pretty simple. At this point I used the Transpose Tool to reshape and adjust the model
This tool is activated by pressing any of deformation modes (Move, Rotate or Scale). The process consisted of making a selection, shading the part
which I did not want to deform and creating one Action Line to deform the model. So I used the Move and Rotate modes to adjust each part of the body
(Fig. 11).
Once I got the final pose of the model I went back to Transpose Master and used the TPose>SubT button to transfer the changes to the original model
(Fig. 12).
http://www.3dm3.com/articles/making-of-amazon-warrior-3277/ 3/30/2011
Making of Amazon Warrior | 3DM3 - Tutorials | Making ofs | Articles | Videos Tutorials Page 9 of 11
I also tested some other more dynamic poses for the model by using this method (Fig. 13).
http://www.3dm3.com/articles/making-of-amazon-warrior-3277/ 3/30/2011
Making of Amazon Warrior | 3DM3 - Tutorials | Making ofs | Articles | Videos Tutorials Page 10 of 11
Finally this was the result after some little tweaking in Photoshop (Fig 14)
Don't miss more tutorials and guides, published daily - subscribe to 3DM3 by RSS. Also you could Follow us on Twitter or simply recommend us to
friends and colleagues! Buy 3D Models with 10% discount on 3DExport!
5
shares
• Share
0
•
0
•
• Delicious
• Technorati
• Stumbleupon
• Reddit
• Furl
• Technorati
Fabio Bautista
• Fabio Bautista's Website
• Fabio Bautista's Twitter
• All posts
Image Post as …
http://www.3dm3.com/articles/making-of-amazon-warrior-3277/ 3/30/2011
Making of Amazon Warrior | 3DM3 - Tutorials | Making ofs | Articles | Videos Tutorials Page 11 of 11
Showing 1 comment
Sort by Popular now Subscribe by email Subscribe by RSS
Like Reply
Subscribe RSS
Challenges CG Blogs Site Map DTuts.com
http://www.3dm3.com/articles/making-of-amazon-warrior-3277/ 3/30/2011