Professional Documents
Culture Documents
Introduction Feature
DMP-9724SNG designed for Teleports, Digital Satellite • Component, Composite, HDMI, HD/SD-SDI video inputs
News Gathering Vehicles, and it is operating on either • Ultra low latency as 150ms
the C, Ku or Ka-bands. • Up to 1080p supported
As a representative model of CASTWIN, it is the best • Support 4:2:0(8bit), 4:2:2(10bit)
performing and fully programmed high-end encoding. • Digital, Analog and SDI embedded audio(8channel) inputs
Also, it has DVB-S/S2 modulation with the highest • 5.1 channel Dolby Digital (AC-3) encoding support
video quality and the lowest latency. • 7.1 channel SPDIF audio optical input (pass through)
• Additional 1xASI input for supporting of insertion of
externally generated PSIP into the transport stream
• Provides internally generated PSI, PSIP, SI
• Control of Frame rate
• Selectable MPEG-2 HD or H.264 HD real-time video encoding
Competitiveness • Simultaneous outputting of 2xTransport stream (ASI) with
UDP/IP or RTP/IP transport stream.
• Providing your viewers with the best performance • Dolby Digital (AC-3), MPEG-1 Layer II, AAC-LC, HE-AAC
compression and flawless picture quality audio encoding
• Wide use in many projects with high compatibility • Supports EIA-708 Closed caption insertion via HD
supporting various formats SDI(SMPTE 334).
• Best choice for broadcasting of racing, sports via • Supports internally generated TVCT, CVCT, SDT, NIT
real time encoding with ultra low latency, at 150ms • Excellent IP converter integrated performance
• Reduce the cost of transmission as supporting -Much lower latency & stable IP output
wide range of bit-rate control and advanced video • Control and monitoring via web browser, front panel, or SNMP
coding techniques • 4 channel AES/EBU Digital Audio
• Able to Secure space with compact size for installing • 4 stereo (8channel) Analog input with D-sub type
• Integrated Advanced Scaler function
- Control of Frame rate, Image enhance
- Phase Noise, Correction of Color, Control of Gamma
• L-Band Output 950 ~2150 MHz or IF Output 50 ~ 180 MHz
• DVB-S/S2 Modulation
• BISS mode-1 and BISS mode-E support
Options • Designed for Teleports, Digital Satellite News Gathering Vehicles
• Operating on either the C, Ku or Ka-bands
• IP Streaming output • Symbol Rate: 1 Mbaud ~ 68 Mbaud
Configuration
High-End Encoding
Latency 150ms
Chroma Format 4:2:0 4:2:2
Resolutions up to 1080p
Introduction Feature
As a representative Encoder of CASTWIN, it is a newly • Component, Composite, HDMI, HD/SD-SDI video inputs
released product which is the best performing and fully • Ultra low latency as 150ms
programmed high-end encoding with wonderful video • Up to 1080p supported
quality and the lowest latency. • Support 4:2:0(8 bit), 4:2:2(10 bit)
DME-9724HM let you feel very much reality as if you • Digital, Analog and SDI embedded audio(8channel) inputs.
are the part of video. Also, it enables to transmit more • 5.1 channel Dolby Digital (AC-3) encoding support
video channels and audio channels at the available • 7.1 channel SPDIF audio optical input(pass through)
bandwidth. • Additional 1xASI input for supporting of insertion of
externally generated PSIP into the transport stream
• Provides internally generated PSI, PSIP, SI
• Control of Frame rate
• Selectable MPEG-2 HD or H.264 HD real-time video encoding
Competitiveness • Simultaneous outputting of 2xTransport stream (ASI) with
UDP/IP or RTP/IP transport stream.
• Providing your viewers with the best performance • Dolby Digital (AC-3), MPEG-1 Layer II, AAC-LC, HE-AAC
compression and flawless picture quality audio encoding
• Wide use in many projects with high compatibility • Supports EIA-708 Closed caption insertion via HD
supporting various formats SDI(SMPTE 334)
• Best choice for broadcasting of racing, sports via • Supports internally generated TVCT, CVCT, SDT, NIT
real time encoding with ultra low latency, at 150ms • Excellent IP converter integrated performance
• Reduce the cost of transmission as supporting -Much lower latency & stable IP output
wide range of bit-rate control and advanced video • Control and monitoring via web browser, front panel, or SNMP
coding techniques • 4 channel AES/EBU Digital Audio
• Able to Secure space with compact size for installing • 4 stereo(8channels) analog input with D-sub type
• Integrated Advanced Scaler function
- Control of Frame rate, Image enhance
- Phase Noise, Correction of Color, Control of Gamma
Specifications
ITEM CHARACTER
Analog Input Composite, Component
Level 1 Vp-p
Digital Input HDMI, HD-SDI
Video Input Level 1000 mVp-p (HDMI) 800mVp-p (HD-SDI)
Resolutions 480i29.97, 576i25, 720p50/59.94,
1080i25/29.97, 1080p25/29.97
SD Aspect Ratio 4:3, 16:9
Input 4 Stereo
Analog Freq. Range 20 Hz ~ 20 KHz
Impedance 600 Ω
Connector D-SUB 15pin x 2
Audio Input
Input 4 x AES-EBU, Embedded SDI/HDMI (4 Stereo 8 Channel)
Digital
Sampling Rate 32, 44.1 and 48 KHz
Connector BNC (75Ω) / HDMI-19PIN
Optical Input SPDIF(7.1 Channel) pass through
Encoding MPEG-2 HP@HL, MP@HL , MP@ML
H.264 HP@L4, MP@L3
Encoding Rate MPEG-2 : 0.6~50 Mbps , H.264 : 0.6~50 Mbps
Video Encoder Chroma Format 4:2:0, 4:2:2 (8 bit / 10 bit)
PSNR 38 dB
Bit Rate Mode CBR,VBR
Latency 150 ms~
Input Sampling Rate 32, 44.1, 48 KHz
Output sampling Rate 48 KHz
MPEG-1 Layer II (2ch) AC-3 (2ch) AC-3 Pro (2ch, 5.1ch)
Encoding
AAC LC (2ch, 5.1ch) HE-AAC v1 (5.1ch) HE-AAC v2 (2ch)
Audio Mix 4 Stereo (8ch) or 5.1ch
Bit Rate AC-3 128, 192, 256, 384 KHz
Audio Encoder AC-3 Pro 96, 112, 128, 160, 192, 224, 256, 320, 384 KHz
MPEG1 64, 96, 112, 128, 160, 192, 224, 256, 320, 384 KHz
AAC LC 32,48,56,64,80,96,112, 128,160,192, 224, 256, 320,384 KHz
HE AAC v2 32, 48, 56, 64, 80, 96 KHz
AC-3 Pro 5.1 224, 256, 320, 384, 448, 576, 640 KHz
AAC LC 5.1 96, 112, 128, 160, 192, 224, 256, 320, 384 KHz
HE AAC v1 5.1 96, 112, 128, 160, 192, 224, 256 KHz
Delay -100 ~ 400 ms
Transport Stream DVB-ASI 1port
Connector BNC (75 Ω)
TS Input
Packet Format 188 Byte
Output Level 800 mVp-p
Transport Stream ASI 2port
Connector BNC (75 Ω)
TS Output
TS Bit Rate MPEG-2 : 2.5~55 Mbps , H.264 : 2.5~55 Mbps
Packet Format 188 Byte
Output 1 port
Connector RJ-45
Ethernet type 10/100/1000 Base-T
IP TS Output Stream Protocol UDP/IP, RTP/IP
Broadcasting Multicast, Unicast
TS Bit rate MPEG-2 : 2.5~55 Mbps , H.264 : 2.5~55 Mbps
Connector RJ-45
Ethernet Interface Type 10/100 Base-T
Protocols SNMP
Power Requirements AC 90~230 V, 50/60 Hz
Power Consumption Max. 100 W
General Weight 4 Kg
Operating Temperature -10 ~ 50 ℃
Dimensions (W x H x D) 482 x 44 x 483 mm
Configuration
High-End Encoding
Latency 150ms
Chroma Format 4:2:0 4:2:2
Resolutions up to 1080p
Introduction Feature
As a representative Encoder of CASTWIN, it is a newly • Component, Composite, HDMI, HD/SD-SDI video inputs
released product which is the best performing and fully • Ultra low latency as 150ms
programmed high-end encoding with wonderful video • Up to 1080p supported
quality and the lowest latency. • Support 4:2:0(8 bit), 4:2:2(10 bit)
DME-9724H let you feel very much reality as if you are • Digital, Analog and SDI embedded audio(8channel) inputs.
the part of video. Also, it enables to transmit more • 5.1 channel Dolby Digital (AC-3) encoding support
video channels and audio channels at the available • 7.1 channel SPDIF audio optical input(pass through).
bandwidth. • Additional 1xASI input for supporting of insertion of
externally generated PSIP into the transport stream.
• Provides internally generated PSI and PSIP.
• Various functions with integrated Advanced Scaler.
• Control of Frame rate, Image enhance, Phase Noise,
Competitiveness Correction of Color, Control of Gamma
• Selectable MPEG-2 HD or H.264 HD real-time video
• Providing your viewers with the best performance encoding.
compression and flawless picture quality • Simultaneous outputting of 2xTransport stream (ASI) with
• Wide use in many projects with high compatibility UDP/IP or RTP/IP transport stream.
supporting various formats • Dolby Digital (AC-3), MPEG-1 Layer II, AAC-LC, HE-AAC
• Best choice for broadcasting of racing, sports via audio encoding.
real time encoding with ultra low latency as 150ms • Supports EIA-708 Closed caption insertion via HD
• Reduce the cost of transmission as supporting SDI(SMPTE 334).
wide range of bit-rate control and advanced video
coding techniques.
• Able to Secure space with compact size for installing
Specification
Video Input TS Input
Configuration
Latency 800ms
Chroma Format 4:2:0 (8bit)
Resolutions up to 1080p
Introduction Feature
CASTWIN’s High-definition encoder offering highest video • Component, Composite, HDMI, HD/SD-SDI video inputs.
quality with low latency. It shows excellent performance • Low latency as 800ms
for inputting signal (Analog & Digital) to output as • Digital, Analog and SDI embedded audio(4ch) inputs.
transport stream signal after compressing and encoding • 5.1 channel SPDIF audio optical input(pass through)
for suitable digital transmission with various supported • Additional 1xASI input for supporting of insertion of externally
formats. Moreover, it supports both MPEG-2 and H.264 so Generated PSIP into the transport stream.
that it makes operators select the format as they want. • Video input Auto detection function.
• Selectable MPEG-2 or H.264 HD/SD real-time video
encoding.
• Various functions with integrated Advanced Scaler.
• Control of Frame rate, Image enhance, Phase Noise, Correction
of Color, Control of Gamma
Competitiveness • Simultaneous outputting of 2xTransport stream (ASI) with
• Excellent option for operators who competitively pursue UDP/IP or RTP/IP transport stream.
the best performing encoding device with high resolution • Dolby Digital (AC-3), MPEG-1 Layer II, AAC-LC, HE-AAC audio
up to 1080p encoding.
• Good option for Real time encoding with low latency
• Low cost and High performance
• Able to secure space with compact and light weight
design
• Make operators pay for less labor fee as offering quick
and easy setup Options
DME-9624HM
Excellent IP converter integrated
- Much lower latency
- More stable IP output
Specification
Video Input TS Input
Configuration
Latency 1100ms
Chroma Format 4:2:0
Resolutions up to 1080i
Introduction Feature
CASTWIN’s High-Definition encoder with the highest • Component, Composite, HDMI, HD/SD-SDI video inputs.
video quality and low latency. It shows outstanding • Low latency as 1,100ms
performance for inputting signal (Analog & Digital) to • Digital and Analog audio inputs.
output as transport stream signal after compressing • Selectable MPEG-2 or H.264 HD/SD real-time
and encoding for suitable digital transmission with video encoding.
various supported formats. Moreover, it supports both • Selectable outputting of 2xTransport stream (ASI) or
MPEG-2 and H.264 so that it make operator select the UDP/IP transport stream.
format as they want. • CBR outputs.
Also, it is very easy to control with Hi-class front VFD. • Dolby Digital (AC-3), MPEG-1 Layer II, AAC-LC audio
encoding.
• User selectable resolution and bit rate.
Competitiveness • Control and monitoring via web browser, front panel or
SNMP
• Easily adaptable to a wide range of professional • Support Internally generated PSI /PSIP
application requiring high level performance
functionality.
• Cost effective device with high resolution up to 1080i
• Retain your viewers with high performance
compression and flawless quality
• Offer user friendly interface with simple set-up and
operation
• Compact and light weight design
Specification
Video Input TS Output
Configuration
8 Channel
MPEG-2 & H.264 SD Encoding
Latency 800ms
8 channel Multiplexing
Introduction Feature
Competitiveness
• Saving your budget opportunities by 8 Channel
Encoding
• Ensure critical content quality is preserved by using
highest – performance compression and flawless
picture quality
• Reduce the installing cost with simple set-up and
Compact Size
• Able to Secure space with Compact and light weight
design
Specification
Video Input TS Output
Audio Input
IP TS Output
Analog Input 1 Stereo
Freq. Range 20Hz ~ 20KHz Output 1 Port
Impedance 600 Ω Connector RJ-45
Ethernet type 10/100/1000 Base-T
Stream Protocols UDP/IP, RTP/IP
Video Encoder IP Address Format Unicast / Multicast
General
Audio Encoder
Power Requirements AC 90~230V, 50/60Hz
Sampling Rate 48KHz Power Consumption Max. 100W
Dolby Digital® AC-3 128,192,256,384 Kbps Weight 4 kg
MPEG-1 Layer II 64, 112~384Kbps Operating Temperature -10~50°C
AAC-LC 32 ~ 384Kbps Dimension(W x H x D) 482 x 44 x 483 mm
HE-AAC v1 32 ~ 192Kbps
HE-AAC v2 32 ~ 96Kbps
Configuration
Introduction Feature
CASTWIN’s the standard definition encoder with the • Component, Composite, HDMI, SD-SDI video inputs.
highest video quality and low latency. It is perfect • Digital, Analog and SDI embedded audio inputs.
choice for customers who are expecting the high-class • Low latency as 800ms
products on video/audio quality. It shows outstanding • Additional 1xASI input for supporting of insertion of
performance for inputting signal(Analog & Digital) to externally generated PSIP into the transport stream.
output as transport stream signal after compressing • Video input Auto detection function.
and encoding for suitable digital transmission with • Selectable MPEG-2 SD or H.264 SD real-time
various supported formats. Moreover, it supports both video encoding.
MPEG-2 and H.264 so that it make operator select the • Simultaneous outputting of 2xTransport stream (ASI) with
format as they want. Also, it is very easy to control with UDP/IP or RTP/IP transport stream.
Hi-class front VFD. • CBR outputs.
• Dolby Digital (AC-3), MPEG-1 Layer II, AAC-LC, HE-AAC
audio encoding.
• Supports internally generated TVCT, CVCT, SDT, NIT
Competitiveness • Control and monitoring via web browser, front panel, or
SNMP
• Providing your viewers with the best performance
compression and flawless picture quality
• Perfect option for broadcasting of sports, racing with
Real time encoding with low latency
• Increase revenue opportunities by enabling
additional services
• Reduce the cost of transmission as supporting Wide
range of bit-rate control and advanced video coding
techniques.
• Additional Cost reduction with Simple set-up and
operation
Specification
Video Input TS Input
Configuration
DVB-S/S2/S2X Receiving
Latency 100ms
Chroma Format 4:2:0 4:2:2
Introduction Feature
As a representative decoder, the professional IRD is • MPEG-2/H.264 SD/HD 10bit/8bit 4:2:2/4:2:0 video decoding.
housed in a space-efficient chassis that receives various • High quality SDI digital video
signals for decompressing. It is applied in many different • SD Aspect ratio conversion(4:3, 16:9)
kinds of networks, such as broadband fiber, cable, digital • 2 x ASI , RF, IP video inputs
terrestrial, satellite and any other distribution network. It • Configured and controlled via front panel LCD.
is very suitable for broadcast and professional • HD-SDI outputs with embedded audio
applications requiring 4:2:2/4:2:0 decoding solution. • HDMI output
• Component Video output
• Analog 4 stereo outputs.
• SNMP control and monitoring
• NTSC, PAL video formats
• Resolution – up to 1080p 29.97
Competitiveness • IP Stream output
• Inputs – ATSC, ASI, QAM (Annex B)
• Providing your customers with the best performance of • 8ch AES/EBU audio input
decoding and high quality • Video Scaling Option (Up/Down/Cross)
• Save your cost with various conversion
• Able to secure space with Compact and light weight
design
• Easy to set-up and control
Options
• DVB-CI
• Input – DVB-S/S2/T/T2
Specification
RF Input ASI Output
ASI Input
Audio Output
DVB-ASI
2 x BNC
SMPTE310M Analog Output 4 balanced stereo pairs
Freq. Range 20Hz ~ 20KHz
Video Decoding Impedance 600 Ω
Digital Output Embedded SDI/HDMI
MPEG-2 SD Profile MP@ML(4:2:0) / 422@ML (4:2:2) Sampling Rate 48 KHz
Max video rate 80 Mbps
Video format 480i@29.97 fps/576i@25 fps
MPEG-2 HD Profile MP@HL(4:2:0) / 422@HL(4:2:2) IP Stream Output
Max video rate 80 Mbps
Video format 1080i@29.97 fps/25 fps, Interface Type 10/100/1000 Base-T
720p@59.94 fps/50 fps Stream Protocols UDP/IP, RTP/IP
H.264 SD Profile MP@L3(4:2:0) / 422HP@L3 (4:2:2) Broadcasting Multicast, Unicast
Max video rate 80 Mbps
Video format 480i@29.97 fps/576i@25 fps
H.264 HD Profile MP@L4 HP@L4 HP@L4.1(4:2:0) General
HIGH/HIGH10/HIGH422@4.1 (4:2:2)
Max video rate 80 Mbps Power Requirements AC 90~230V, 50/60Hz
50 Mbps CABAC, 85 Mbps CAVLC Power Consumption Max. 100W
Video format 1080i@29.97 fps/25 fps, Weight 4kg
720p@59.94 fps/50 fps Operating Temperature -10~50°C
Chroma Format 4:2:0 / 4:2:2 (10bit) Dimension(W x H x D) 482 x 44 x 383 mm
Bit Rate Mode CBR,VBR Power Requirements AC 90~230V, 50/60Hz
Latency 100ms~
Audio Decoding
Introduction Feature
As a professional MPEG decoder, DMD-9724D is able to • MPEG-2/H.264 4:2:0(8bit)/4:2:2(10bit) video decoding.
receive many different kinds of broadcasting signals and • SD Aspect ratio conversion(4:3, 16:9)
output as various digital interface signals. Moreover; it is • Configured and controlled via front panel LCD.
able to decode MPEG-2 and H.264 in both 4:2:2 and • HD-SDI outputs with embedded audio
4:2:0. • Composite Video output
• Analog stereo outputs.
• SNMP control and monitoring
• HDMI Output
• NTSC, PAL video receiving
Competitiveness Options
• Providing your customers with the best performance of Input- DVB-ASI, IP Stream
decoding and high quality RF(8-VSB, QAM, DVB-T/T2, DVB-S) options
• Able to secure space with Compact and light weight
design Output – HDMI, HD-SDI, Composite, Component(Option)
• Easy to set-up and control
Specification
RF Input Video Output
Frequency Range 54~864MHz (8-VSB, QAM, DVB-T,/S) Analog Output Composite, Component(option)
Input Channel 1CH Digital Output HDMI , SDI
Impedance 75Ω 480i29.97, 576i25, 720p50/59.94,
Resolutions
Input Level -25~25dBmV 1080i25/29.97, 1080p25/29.97
Return Loss ≥ 17 dB SD Aspect Ratio 4:3, 16:9
Noise Figure VHF 7dB, UHF 9dB
Audio Output
TS Input
Analog Output 1 Stereo
Transport Stream DVB-ASI 1 port Freq. Range 20Hz ~ 20KHz
Impedance 600 Ω
Packet Format 188 Byte
Connector BNC(75Ω) Digital Output Embedded SDI/HDMI (4stereo 8ch)
Sampling Rate 32, 48 KHz
TS Bit Rate MPEG-2 : 2.5~55 Mbps
Optical Input SPDIF(7.1Channel) Pass Through
H.264 : 2.5~55 Mbps
IP TS Input
Ethernet
Interface Type 10/100Base-T
IP Stream 1 port
Protocols SNMP
Connector RJ-45
Ethernet type 10/100/1000 Base-T
General
Format UDP/IP, RTP/IP
Power Requirements AC 90~230V, 50/60Hz
IP Address Format Multicast, Unicast
Power Consumption Max. 100W
TS Bit Rate MPEG-2 : 2.5~55 Mbps
Weight 4kg
H.264 : 2.5~55 Mbps
Operating Temperature -10~50°C
Dimension(W x H x D) 482 x 44 x 383 mm
Video Decoder
Power Requirements AC 90~230V, 50/60Hz
Decoding MPEG-2 HP@HL, MP@HL , MP@ML
H.264 HP@L4, MP@L3
Bit Rate MPEG-2 : 2~50 Mbps
H.264 : 0.6~50 Mbps
Chroma Format 4:2:0, 4:2:2 (10bit)
Bit Rate Mode CBR,VBR
Latency 100ms~
Audio Decoder
Configuration
Introduction Feature
As a representative model of CASTWIN, it is a new • Advanced modulation integrated
released evolutionary product. It is the professional and • Component, Composite, HDMI, HD/SD-SDI video inputs.
Hi-class product combining Ultra low delay HD Encoder • Ultra low latency as 150ms
and ATSC(8-VSB) Modulator. Moreover, it supports • Digital, Analog and SDI embedded audio(8ch) inputs.
both MPEG-2 and H.264 so that operator can select • 7.1 channel SPDIF audio optical input(pass through).
and use the format. It is adopting high technology and • Additional 1xASI input for supporting of insertion of
very effective to make whole Digital Transmission externally generated PSIP into the transport stream.
System very compact and easy to control • Provides internally generated PSI and PSIP.
with front VFD. • Selectable MPEG-2 or H.264 real-time video
encoding.
• Simultaneous outputting of 1xRF and 1xTransport stream
Competitiveness (ASI) with UDP/IP or RTP/IP transport stream.
• CBR or VBR outputs.
• Retain your viewers with high performance • Dolby Digital (AC-3), MPEG-1 Layer II, AAC-LC, HE-AAC
compression and flawless quality audio encoding.
• Cost effective solution as a product combined • Supports EIA-708 Closed caption insertion via HD
modulator and up-converter SDI(SMPTE 334).
• Wide use in many projects with high compatibility • Control and monitoring via web browser, front panel, or
supporting various formats SNMP.
• Best choice for broadcasting of racing, sports via • PCR Jitter : ≤ ± 200 ns
real time encoding with ultra low Latency as 150ms • Excellent RF Output performance
• Reduce the cost of transmission as supporting wide • Scaling function with integrated Advanced Scaler
range of bit-rate control and advanced video coding • Phase Noise VHF -105 dB@20KHz, UHF -103 dB@20KHz
techniques. • Frequency : 54 ~ 1002MHz
• Able to secure space with compact size for • MER After Equalizer : 42dB
installing
Options
QAM(Annex A, B and C) Modulation
DVB-T Modulation
Specifications
ITEM CHARACTER
Analog Input Component , Composite
Digital Input HDMI , HD-SDI
Video Input Level 1000 mVp-p (HDMI) / 800 mVp-p (HD-SDI)
Resolutions 480i29.97, 576i25, 720p50/59.94, 1080i25/29.97
Aspect Ratio 4:3, 16:9
Analog Input Stereo
Freq. Range 20 Hz ~ 20 KHz
Impedance 600 Ω/ 20 KΩ
Audio Input
Input AES-EBU Embedded SDI/HDMI (4 Stereo 8 Channel)
Digital
Sampling Rate 32,44.1,48 KHz
Optical Input SPDIF (7.1Channel) Pass Through
Transport Stream ASI 1 Port
TS Input
Packet Format 188 Byte
Encoding MPEG-2 MP@HL , MP@ML
H.264 HP@L4, MP@L3
Encoding Rate MPEG-2 : 0.6~55 Mbps , H.264 : 0.6~50 Mbps
Video Encoder Chroma Format 4:2:0, 4:2:2 (8 bit/10 bit)
PSNR 38 dB
Bit Rate Mode CBR,VBR
Latency 150 ms~
Sampling Rate 48 KHz
Dolby Digital® AC-3(5.1CH) 128,192,256,384,448,512,576,640 Kbps
MPEG-1 Layer II 64,96,112,128,160,192,224,256,320,384 Kbps
Audio Encoder
MPEG-4 AAC-LC 32~384 Kbps
MPEG-4 HE-AAC v1 32~192 Kbps
MPEG-4 HE-AAC v2 32~96 Kbps
Frequency Range 50~1002 MHz
Impedance 75 Ω
Output Level 50 ± 5 dBmV
Level Control Range 0 ~ -15 dB
MER After Equalizer 42 dB
MER Before Equalizer 37 dB
RF Output Phase Noise VHF -105 dB@20KHz, UHF -103 dB@20KHz
Adjacent Channel Carrier/Attenuation Characteristic ≤ -45 dB (Out of band)
Spurious ≤ -63 dB
Return Loss ≥ 17 dB
Frequency Response ± 0.5 dB
Frequency Tolerance ± 2 ppm
Group Delay ± 20 ns
PCR Jitter ≤ ± 200 ns
Transport Stream ASI 1 port
TS Output TS Bit Rate MPEG-2 : 2.5~55 Mbps , H.264 : 2.5~55 Mbps
Packet Format 188 Byte
Output 1 Port
Connector RJ-45
IP TS Output Ethernet type 10/100/1000 Base-T
(Option) Stream Protocol UDP/IP, RTP/IP
Broadcasting Multicast, Unicast
TS Bit Rate MPEG-2 : 2.5~55 Mbps , H.264 : 2.5~55 Mbps
Connector RJ-45
Ethernet Interface Type 10/100 Base-T
Protocols SNMP
Power Requirements AC 90~230 V, 50/60 Hz
Power Consumption Max. 100 W
General Weight 4 Kg
Operating Temperature -10~50 °C
Dimensions (W x H x D) 483 x 44 x 383 mm
Configuration
Introduction Feature
CASTWIN’s the professional and hi-class product • Component, Composite, HDMI, HD/SD-SDI video inputs.
combining low delay HD Encoder and ATSC(8-VSB) • Digital, Analog and SDI embedded audio inputs.
Modulator. It is adopting high technology and very • 5.1 channel SPDIF audio optical input(pass through).
effective to make whole Digital Transmission • Low latency as 800ms
System very compact and easy to control with front • Additional 1xASI input for supporting of insertion of
VFD. Moreover, it supports both MPEG-2 and H.264 so externally generated PSIP into the transport stream.
that operator can select and use the format. • Selectable MPEG-2 HD or H.264 HD real-time video
encoding.
• Simultaneous outputting of 1xRF and 1xTransport
stream(ASI) with UDP/IP or RTP/IP transport stream
• CBR outputs.
Competitiveness • Dolby Digital (AC-3), MPEG-1 Layer II, AAC-LC, HE-AAC
audio encoding.
• Cost effective as integrated modulator and up-converter • Supports internally generated TVCT, CVCT, SDT, NIT
• Excellent option for operators who competitively pursue • Scaling function with integrated Advanced Scaler
the best performing encoding device with high • Supports EIA-708 Closed caption insertion via
resolution HDSDI(SMPTE 334).
• Best option for Real time encoding with low latency • Control and monitoring via web browser, front panel, or
• Able to Secure space with Compact and light weight SNMP
design • Phase Noise VHF -105 dB@20KHz, UHF -103 dB@20KHz
• Make operators pay for less installing fee as offering • Frequency : 54 ~ 1002MHz
Quick and easy setup • Excellent RF Output performance
Options
QAM(Annex A, B and C) Modulation
DVB-T Modulation
Specification
Video Input RF Output
Frequency Range 54~870 MHz
Analog Input Component , Composite Impedance 75 Ω
Output Level 50 ± 5 dBmV
Digital Input HDMI , SDI
Level Control Range 0 ~ -15 dB
480i29.97/30, 576i25, 720p50/59.94/60,
Resolutions MER After Equalizer 42 dB
1080i25/29.97/30 1080p25/29.97/30
MER Before Equalizer 37 dB
Aspect Ratio 4:3, 16:9 VHF -105 dB@20KHz
Phase Noise
UHF -103 dB@20KHz
Audio Input Adjacent Channel
≤ -45 dB (Out of band)
Carrier/Attenuation Characteristic
Analog Input 1 Stereo(2channel) Spurious ≤ -63 dB
Freq. Range 20Hz ~ 20KHz Return Loss ≥ 17 dB
Impedance 600 Ω Frequency Response ± 0.5 dB
Frequency Tolerance ± 2 ppm
Digital Input AES-EBU Embedded SDI/HDMI
Group Delay ± 20 ns
Sampling Rate 32,44.1,48 KHz PCR Jitter ≤ ± 200 ns
Optical Input SPDIF(5.1 Channel) (pass through
TS Output
TS Input Transport Stream ASI 1 port
TS Bit Rate MPEG-2 : 3.4~19 Mbps
Transport Stream ASI 1 Port H.264: 2.5~19 Mbps
Packet Format 188 Byte Packet Format 188 Byte
Configuration
Introduction Feature
CASTWIN’s professional and hi-class product combining • Component, Composite, HDMI, HD/SD-SDI video inputs
low delay HD Encoder and ATSC(8-VSB) Modulator. • Digital and Analog audio inputs
It is adopting high technology and very effective to • Low latency as 1,100ms
make whole Digital Transmission System very compact • Selectable MPEG-2 HD or H.264 real-time video
and easy to control with front VFD. encoding.
• CBR outputs.
• Dolby Digital (AC-3), MPEG-1 Layer II, AAC-LC audio
encoding.
• User selectable resolution and bit-rate, output frequency.
• Control and monitoring via web browser, front panel.
• PCR Jitter : ≤ ± 200 ns
Competitiveness • Group Delay as ± 20 ns
• Phase Noise VHF -105 dB@20KHz, UHF -103 dB@20KHz
• Easily adaptable to a wide range of professional • Frequency : 54~ 1002MHz
application requiring high level performance • Excellent RF Output performance
functionality. • MER After Equalizer : 42dB
• Retain your viewers with high performance • Support Internally generated PSI /PSIP
compression and flawless quality
• Save installing fee with Simple set-up and operation
• Retain your viewers with high quality and low
attenuation
Options
QAM(Annex A, B and C) Modulation
DVB-T Modulation
Specification
Video Input RF Output
Configuration
Introduction Feature
• Fully complying with ISDB-T & ISDB-Tb standards
CASTWIN’s high-performance ISDB-Tb multiplexer • Compact & Cost-effective ISDB-Tb Multiplexer
DMX-1908ST is and ideal & cost-effective solution for • External 10MHz & 1PP input (SFN supports)
ISDB-T/Tb transmitter/translator manufacturers, system • PSI/SI Information editing & generating
integrators and broadcaster who want their own ISDB- • PCR Correction and PID re-mapping
Tb multiplexer in any region or country where is • IIP Packet editing and inserting
adopting ISDB-Tb • Interoperability proven with major ISDB-Tb Transmitters
Competitiveness
Transmitter/Translator manufacturers can provide
package solution which combines their own ISDB-Tb
transmitter/translator and DMX-1908ST : ISDB-Tb • supports SFN with 1PPS & 10Mhz input
together for broadcasters. It will be your strong • provides various re-multiplexing functions such as
competitiveness comparing with other competitors who PCR correction, PID re-mapping,, and PSI/SI
has only exciter or translator. Of course, DMX-1908ST : information editing & generating
ISDB-Tb will be a perfect solution for broadcasters who • supports various global DTV/Mobile TV Standards,
want to find more cost-effective Head-end multiplexer including ISDB-T, ATSC, ATSC-M/H, CMMB, DVB-T2
and SFCMM on single board
Options
ISDB-T & ISDB-Tb
Specification
Input Output
Introduction Feature
CASTWIN’s High-Performance DVB-T2 Gateway, • DVB-T2 MI Encapsulation
DMX-1908T2 DVB/T2 Gateway is an ideal & cost- Encapsulation into Base Band frames
effective solution for DVB-T2 transmitter/translator Full support of BB frame modes
manufacturers and system integrators who want their
own product range in any region or country where is • DVB-T2 MI interface to the DVB-T2 Transmitters
adopting DVB-T2. L1 Signaling & SFN time stamp insertion.
The DMX-1908T2 DVB-T2 Gateway encapsulates one or • Individual Addressing of DVB-T2 modulators
several MPEG-2 TS from DVB-T2 multiplexers into DVB- MISO (Multi Input Single Output) support
T2 Base Band frames, and outputs the resulting DVB-T2 Peak to Average Power Ratio (PAPR) parameters
multiplex using the DVB-T2 MI (Modular Interface)
protocol via ASI and IP. The DVB-T2 MI controls the • Integrated SFN adopter
modular parameters and provides the accurate timing Single & Multi PLP operation
and rate control required in a SFN network. It also Mapping of input TS into individual PLPs
supports MISO broadcasting to reinforce SFN
performance and management of 8 PLP (Physical Layer • T2-MI Outputs
Pipes) without any option. Generation of T2-MI packets
Specification
Input SFN Parameter
DVB-ASI Output 2EA Min/Max/Current Bitrate monitoring of Packets for Each Services
10MHz Loop Out 1EA Easy-to-use Web based GUI
Monitoring ALL Input / Output and System
Full SNMPv2 support
Introduction Feature
CASTWIN’s NMS offers optimized solution which is very • Realize high advanced network monitoring
adaptable for various devices. It provides user friendly • Monitoring operation status
interface and convenience in order to integrative • Convenient Tab for searching
manage the number of devices easily. Also, it offers • Sensing for any occurred problem from devices
Fast-analyzing function to respond for any occurred • Management of error, function, solution
problem immediately. It uses convenient managing • Management of data upon occurred error, fluctuation
tool set so that it let users manage for CASTWINs. • Monitoring entire network of CASTWIN
Additionally, it offers warning and notice solution for • Prompt access via Web GUI
various cases. • Perfect and fast control
• Standard up-grade & maintenance
Competitiveness
• CASTWIN’s NMS offers optimized solution to
prevent from inconvenience with un-necessary
function, inaccurate data, bug etc after set-up.
• CASTWIN’s NMS is much easier to use and install for
users compared to other existing NMS.
• Cost effective solution by easy installation and
reduction of labor cost
• Enable users to better manage the network and
quality of service combined with lower operational
costs
Introduction Specification
AS a 8-VSB modulator, it is a professional performing Digital Input
product based on the 8-VSB(ATSC) modulation.
It shows superior quality to modulate MPEG transport Transport Stream DVB-ASI
stream as DVB-ASI signal to 8-VSB(ATSC) and output as Connector BNC (75Ω)
Coding ITU-T (J.83) Annex D
suitable frequency band for digital broadcasting Bit Rate 19.393 Mbps
transmission. Packet Format 188Byte
Symbol Rate 10.762 Msymbol/s
Also, it is very easy to control with high class front VFD. Modulation 8-VSB
Feature RF Output
• ASI input transport stream
Frequency Range 54~1002MHz
• Excellent RF output
Impedance 75Ω
• Supports 8-VSB(ATSC) modulation
• User adjustable output level and frequency Output Level 50 ± 5 dBmV
• Front panel control Level Control Range 0~-15dB
• PCR Jitter: ≤ ± 200 ns Bandwidth 6MHz
• Group Delay as ± 20 ns MER After Equalizer ≥ 42 dB
• Phase Noise VHF -105 dB@20KHz, UHF -103 dB@20KHz MER Before Equalizer ≥ 37 dB
• Frequency: 54 ~ 1002MHz Phase Noise VHF -105 dB@20KHz
• Output Level: 55±5 dBmV UHF -103 dB@20KHz
Adjacent Channel Carrier
• Spurious: ≤ -63dB Attenuation Characteristic ≥ 45 dB (Out-of-band)
• MER After Equalizer: 42dB Spurious ≤-63 dB
• Highly Advanced fine-tuning Return Loss ≥ 17 dB
Group Delay ± 20ns
Competitiveness Frequency Response ± 0.5dB
Frequency Tolerance ± 2ppm
• Retain your viewer with optimized modulator for PCR Jitter ≤ ± 200 ns
ATSC(8-VSB)
• Excellent coding as ITU-T(J.83) Annex D General
• Cost reduction for installing with simple set-up and operation
• Stable output with Hybrid AMP integrated Power Requirements AC 90~230V, 50/60Hz
Power Consumption 13W
• Secure more space with compact and light weight design Weight 3Kg
Dimensions 482 x 44 x 383 mm
Configuration
Introduction Specification
AS a QAM modulator, it shows professional Digital Input
performance for received transport stream signal to
output as frequency band for suitable CATV band Transport Stream ASI
transmission. It is also easy to select frequency band via Connector BNC (75Ω)
Coding ITU-T (J.83) Annex A, B and C
front control panel. Bit Rate 1~52 Mbps
Packet Format 188 Byte
Symbol Rate 1~7Mbps
Modulation 64,256 QAM
Feature RF Output
• ASI input transport stream
Frequency Range 54~1002MHz
• Excellent RF output Impedance 75Ω
• Supports QAM modulation Output Level 50 ± 5 dBmV
• Supports PCR re-stamping function Level Control Range 0~-15dB
• User adjustable output level and frequency Bandwidth 6MHz : Annex B and C
• Front panel control 8MHz : Annex A
• QAM Modulation setting (64, 256QAM) MER After Equalizer ≥42 Db
• PCR Jitter: ≤ ± 200 ns MER Before Equalizer ≥37 dB
• Group Delay as ± 20 ns Phase Noise VHF -105 dB@20KHz
• MER After Equalizer: 42dB UHF -103 dB@20KHz
• Phase Noise: VHF -105 dB@20KHz, UHF -103 dB@20KHz Adjacent Channel Carrier
Attenuation Characteristic ≥ 45 dB (Out-of-band)
• Frequency: 54 ~ 1002MHz
• Output Level: 55±5 dBmV Spurious ≤-63 dB
• Spurious: ≤ -63dB Return Loss ≥15 dB
Group Delay ±2 0ns
Frequency Response ± 0.5dB
Competitiveness Frequency Tolerance ±2ppm
PCR Jitter ≤ ± 200 ns
• Hi-dense modulating for QAM(Annex A, B and C)
• Advanced coding as ITU-T(J.83) Annex A, B and C General
• Cost effective with simple set-up and operation
Power Requirements AC 90~230V, 50/60Hz
• Hybrid AMP integrated Power Consumption 13W
Weight 3Kg
Dimensions 482 x 44 x 383 mm
Configuration
Specification
KEY ATTRIBUTES
Introduction
As a NEW released CASTWIN products, It is converts IP Physical Layer IEEE 802.3a
GigE Port Data rate 10/100/1000
to DVB-ASI , or DVB-ASI to IP with GigE Interface.
Connector RJ-45
The IP Converter is a cost effective alternative to above
both systems, as it connects digital video equipment to Physical Layer DVB-ASI (coax)
easy management. Also it is very easy to control with ASI Port Connector 75Ω BNC(2x)
Hi-class front VFD. Ts bitrate < 214 Mbit/s
TS per IP 1~7
Transport Encapsulation UDP or RTP
FEC SMPTE 2022
Applications
• Autonomous IP to ASI gateway
• With DIC-500 Tunneling of ASI signals over LAN, WAN
or the internet
• Remote ASI output adapter for server based data
inserters, stream servers, multiplexers and similar
systems
Specification
Scalar
Video Input
HDMI
General
Specification
Scaler
Video Input
Introduction
Digital Input HDMI
As a NEW released CASTWIN products, it is high
performance Cross Converter which converts the signal 480i(29.9/30), 576i(25), 720p(50/59.94/60)
from various inputting formats as HDMI, 3G/HD/SD-SDI, Resolutions 1080i(25/29.97/30)
component, composite to various formats. Also, it is 1080p(23.98/24/25/29.97/30/50/59.94/60)
integrated with video processor which supports
Selectable resolution and improvement for Image Aspect Ratio 4:3, 16:9
enhancing, Phase Noise, control of colors & Gamma. Color Precision 4:2:2, 4:4:4
HDMI Version V1.4 Standard
Audio Input
Feature
Digital Input Embedded HDMI
• Inputs : HDMI Sampling Rate 32, 44.1 & 48 KHz
• Outputs : 3G/HD/SD-SDI Connector HDMI-19PIN
• Selectable Output Resolution: 480i, 576i, 720p, 1080i, 1080p
• HDMI v1.4 standards Video Output
• Upload and configuration via USB2.0
Digital Output 3G/HD/SD-SDI
Impedance 75 Ω
Aspect Ratio 4:3, 16:9
SMPTE-
Competitiveness Compliance
259/272/274/292/296/299/424/425
Data Rates SD-SDI : 270Mbps
• Compact Size and Light Weight
HD-SDI : 1.5Gb/s & 3Gb/s
• Low Cost & High performance
Video Rates 4:2:2, 4:4:4
• Simply easy to use
Color Space YUV
• Fully compatible with all your SD and HD device.
General
Specification
Video Input
SDI
Feature Compliance SMPTE-259/272/274/292/296/299/424/425
• Inputs : HDMI, SDI, Component, Composite Data Rates SD-SDI : 270Mbps
• Outputs : HDMI, 3G/HD/SD-SDI, HD-SDI : 1.5Gb/s & 3Gb/s
• AES/EBU(BNC) , Analog L/R audio input interface Video Rates 4:2:2, 4:4:4
• HDMI, 3G/HD/SD-SDI supports Color Space YUV
• HDMI v1.4 standards support
• HDMI/SDI Dual output HDMI
• 2Ch Mini XLR Audio inputs interface
• Upload and Configuration via USB2.0 Color Precision 4:2:2, 4:4:4
Version V1.4 Standard
General
Analog to SDI
Specification
Video Input
STH-500 HTS-500
Introduction Introduction
It is superior to convert from SDI to HDMI video out It is superior to convert from HDMI to SDI video out
with embedded HDMI audio with embedded SDI audio.
Feature Feature
• Input : Embedded 3G/HD/SD-SDI • Input : HDMI
• Output : HDMI • Output: 3G/HD/SD-SDI
• HDMI V1.4 standards • HDMI V1.4 standards
• SDI loop through output • Upload and configuration via USB2.0
• Upload and configuration via USB2.0
Specification Specification
Video Input Video Input
Digital Input 3G/HD/SD-SDI Digital Input HDMI
480i(29.9/30), 576i(25), 720p(50/59.94/60) 480i(29.9/30), 576i(25), 720p(50/59.94/60)
Resolutions 1080i(25/29.97/30) Resolutions 1080i(25/29.97/30)
1080p(23.98/24/25/29.97/30/50/59.94/60) 1080p(23.98/24/25/29.97/30/50/59.94/60)
Impedance 75Ω Aspect Ratio 4:3, 16:9
Aspect Ratio 4:3, 16:9
Audio Input
Audio Input Digital Input Embedded HDMI
Digital Input Embedded SDI Sampling Rate 32,44.1,48KHz
Sampling Rate 48KHz Connector HDMI-19PIN
Connector BNC (75Ω)
SDI
SDI Compliance SMPTE-259/272/274/292/296/299/424/425
Compliance SMPTE-259/272/274/292/296/299/424/425 Data Rates SD-SDI : 270Mbps
Data Rates SD-SDI : 270Mbps HD-SDI : 1.5Gb/s & 3Gb/s
HD-SDI : 1.5Gb/s & 3Gb/s Video Rates 4:2:2, 4:4:4
Video Rates 4:2:2, 4:4:4 Color Space YUV
Color Space YUV
HDMI
HDMI Color Precision 4:2:2, 4:4:4
Color Precision 4:2:2, 4:4:4 Version V1.4 Standard
Version V1.4 Standard
Video Output
Video Output Digital Output 3G/HD/SD-SDI
Digital Output HDMI Impedance 75 Ω
Aspect Ratio 4:3, 16:9 Aspect Ratio 4:3, 16:9
General General
Power Requirements DC 12V 1A Power Requirements DC 12V 1A
Weight 0.22Kg Weight 0.22Kg
Dimensions 110x90x28 mm Dimensions 110x90x28 mm