Professional Documents
Culture Documents
appli 569 a
Ensures availability of the Simplicity ensures safety To find out more…
electrical power supply Thanks to their on-load switching capacity, Visit our website:
under all circumstances coupled with their Auto and Manual
www.socomec.com/en/transfer
operating modes, the ATYS are simple to
The functions and design of the ATYS use and 100 % secure. The selection of
product range all work towards one key the power supply source to the load can
QRCODE 052 b GB
2 ATYS - SOCOMEC
ATyS family
A complete range of transfer switches, from 125 to 3200 A,
adapted to all your applications
Five product versions are available, ensuring a solution suited to your application.
WEB
SERVE
OPTIO R
N
Automatic controller
Automatic controller Functions for
Remote to manage
Dual power to manage energy management
Transfer transformer /
supply transformer /
Switch transformer
genset applications Communication options
applications
The ATYS t, ATYS g and This means that the products Conversely, ATYS and ATYS d (RTS),
ATYS p (ATS) versions differ themselves monitor the availability require an external controller to
from the ATYS and ATYS d of sources, start the generators if provide them with switching commands.
in that they integrate an necessary and automatically switch to
automatic controller. the available source.
SOCOMEC - ATYS 3
Benefits of the ATyS range
atys-G 002 a
nominal voltages and frequencies for the amount of time required to be
the network. Simply cable the product, operational.
which will then measure the values and For ATYS t and ATYS g, configuration
record them. adjustment is achieved via
potentiometers, requiring only a
screwdriver and a few minutes.
Improved performance
UPS
4 ATYS - SOCOMEC
The benefits of ATyS p
atys-S 018 A
atys 849 B gb
ATYS M
modular transfer switches
from 40 to 160 A
Four versions of ATYS M
(remote-controlled and automatic)
are available to meet the vast majority
Communication options which make the difference: of your source switching application
Modbus, Ethernet and Webserver requirements.
Thanks to optional modules, ATYS p The Webserver function enables:
communicate using Modbus and • product status display (product position
Ethernet protocols. and source status),
The Ethernet communication module • the display of voltage measurements,
also integrates the Webserver function, • the display of configured parameters,
allowing the ATYS p to be accessed via a • access to the event log.
web browser. atys-PM 001 B
atys 850 a
SOCOMEC - ATYS 5
Selection guide
Type of transfer
Emergency manual transfer via handle • • • • •
Remote controlled transfer using dry contact piloting (RTSE) • •
Automatic transfer (ATSE) • • •
Number of poles
3P • • • • •
4P • • • • •
Supply type
230 VAC single power supply •
230 VAC dual power supply • • • •
Application
Generator - Generator applications • (1) • (1)
Network - Generator application • (1) • (1) • •
Network - Network application • (1) • (1) • • •
6 ATYS - SOCOMEC
References for the ATYS range
Product Rating
95: I - 0 - II 012: 125 A 050: 500 A 160: 1600 A
016: 160 A 063: 630 A 180: 1800 A
020: 200 A 080: 800 A 200: 2000 A
025: 250 A 100: 1000 A 250: 2500 A
031: 315 A 120: 1250 A 320: 3200 A
Type
040: 400 A
2: ATYS r
3: ATYS d
4: ATYS t
5: ATYS g
7: ATYS p
95 2 3 4 063
Number of poles
atys 851 D gb
Aux. supply 3: 3 poles
3: 208 - 277 VAC +/- 20% 4: 4 poles
SOCOMEC - ATYS 7
Socomec worldwide
IN EURoPE IN ASIA PACIfIC IN MIddlE EAST
Non contractual document. © 2016, Socomec SAS. All rights reserved. - document printed on paper from sustainably managed forests.
Critical Power Fax +44 1462 431 143
Tel. +48 22 825 73 60 info.uk@socomec.com
Fax. +48 22 825 73 70
info.ups.pl@socomec.com
Power Control & Safety / Energy Efficiency
Tel. +48 91 442 64 11
Fax +48 91 442 64 19
info.scp.pl@socomec.com
DOC 182053 - 06 / 16 - Photo: Martin Bernhart - Réalisation: SOCOMEC - Gyss Imprimeur Obernai
www.socomec.com