Professional Documents
Culture Documents
As 53899 Neo GC 611516 Us 1025-7 PDF
As 53899 Neo GC 611516 Us 1025-7 PDF
General Catalog
Simple Setup
1 push setting with the PRESET Button
Simple Display
All sensors display “0” or “100”
Simple Operation
Laser, fiberoptic, and photoelectric models all share
the same simple functionality
2
Simple and Precise detection with the “NEO Preset”
Specifications Dimensions
CONCEPT
reflective applications
When using diffuse reflective type sensors, variations in the received light
intensity can occur due to changing conditions such as mounting position
and target configuration, thus resulting in unstable operation when attempting
to detect small objects. The NEO Preset function erases these concerns and
enables detection to be as simple as a thrubeam.
No target present...
100
Specifications Dimensions
Target detected!
Specifications Dimensions
3
With the “NEO Series”, sensor changes never go undetected!
4
NEW Laser, fiberoptic, and photoelectric models
CONCEPT
all share the same simple operation
Until now, the method of operation to activate new features differed from sensor to sensor. The NEO
Series eliminates this problem by integrating the same features, functions, and key layout in all series.
This allows you to select the best model for your application without having to learn the operation of a
new sensor each time.
Conventional
Specifications Dimensions
Specifications Dimensions
Laser sensor
Fiberoptic sensor
Specifications Dimensions
Photoelectric sensor
5
Digital Laser Sensor
6
detection position
Want to see the
wraparound
caused by light
detection errors
Want to prevent
distance
the installation
Want to increase
harsh environment
Need to use in a
small targets
Need to detect
size
sensor beam spot
Want to adjust the
moving targets
Need to detect fast-
space
Limited installation
A A A B A A A B B P.8
Since the spot Narrow laser Detection spot Using the 80 μs response Sensor head Variety of
Specifications Dimensions
is a visible spot remains size remains LV‑NH32, the time in High cable can be small size
red laser, the unchanged over unchanged as beam spot can Speed mode. extended up to sensor heads.
detection point is long range. the detection be adjusted to a 10 m (3.28'). In addition,
easy to see, even distance is focused or wide increased
at long distances. increased. spot, regardless detection
of the mounting distance reduces
distance. installation
limitations.
C B A B C A A P.24
Visible red A wide variety Beam spot 50 μs response Wide variety of
Specifications Dimensions
LED enables of heat resistant adjustment is time in High small sensor
the spot to be and fluorocarbon possible when Speed mode. head shapes
seen at closer polymer encased using the FU‑10 and sizes allow
distances sensor heads or F-5HA. for installation
provide durable (Mounting in almost any
options for harsh distance space-limited
environments. must remain application.
unchanged.)
C B C B C P.54
Several PS-49 can Sensor head
Specifications Dimensions
fluorocarbon detect targets cable can be
polymer as small as extended up to
encased sensor ø1.5 mm (0.06") 10 m (3.28').
heads provide at a distance of
durable options 50 mm (1.97").
for water, oil,
and chemical
environments.
P.62
A : Excellent
B : Good
C : Acceptable
7
Digital Laser Sensor
* The UL certificate is for LV-NHxx sensor head and LV-Nxx amplifier used in combination.
Using a laser enables long distance detection for difficult applications while maintaining
a focused, visible beam spot.
FUNCTION
8
Lasers are Visible, Long Range, and Adjustable
Visible beam ensures simple Long range detection is Because the beam remains
alignment and installation possible, eliminating unchanged, lasers can easily
installation restrictions detect through small gaps
Specifications Dimensions
Stable detection of small y Conventional y Laser sensor
photoelectric sensor
targets Even minute targets
can be pinpointed and
Because the light
diffuses, the sensor is detected.
Because the beam remains focused, small affected by background
targets can be pinpointed for detection. objects.
Furthermore, because the LV-NEO resists up
to 20,000 lux, stable operation is maintained
even when exposed to sun and fluorescent
lighting.
Specifications Dimensions
desired functions
Laser sensors are designed for general use, but requirements for target detection often demand more. Therefore,
customers often seek additional setting options.
The following modes are built into the NEO Series. Simply select the intended use. There is no need for complicated
setting operations.
Specifications Dimensions
Reflective model background Sets the background as 0 with no target present when
cancellation mode using a reflective model.
Area detection mode Set a high and low value for zone detection.
9
Interference Prevention function supports up to
8 sensors*
Factory automation equipment is
y Sensor transmission
continuously decreasing in size, yet
cycle timing 1st sensor
the number of applications that require
sensors is steadily rising. When Interference is prevented
by automatically shifting the 2nd sensor
installing multiple sensors in a small radiation cycle pattern of the
area, the problem of interference laser light.
between nearby sensors can arise. 3rd sensor
* Diagram represents LV-N11N /
The NEO Series is equipped with a N12N when using FINE mode and
function that prevents interference set to double. 4th sensor
from up to 4 (or 8*) other sensors. * Same operation concept as the
* When in ULTRA or MEGA mode and set to FS-N and PS-N.
5th sensor
“double”.
Time
10
<Sensor head variations>
Specifications Dimensions
LV-NH35 / NH62 / S61 Coaxial Structure
y General reflective photoelectric sensor y Coaxial structure Even in small locations, the
target can be detected as long
as the beam spot is able to
Transmitter
Specifications Dimensions
reach the target.
Receiver The sensor switches ON at the
Target Target
same position, regardless of
Receiver
the distance to the target.
Actual
dimensions
LV-S71 30 mm (1.18") Small ø1.2 mm (0.05") spot diameter at
500 mm (19.69")
Specifications Dimensions
LV-S62 / S63 Multi-Wavelength Laser
11
LINEUP Laser head variation to solve difficult conditions
Adjustable
Small size, Side view beam spot
Small size Space-saving, side view Up to 1.2 m 3.9' detecting distance.
Enables long distance, small spot sensor head provides a long Freely adjust the size and shape of the
Spot type
detection with an ultra-small footprint. distance small spot. beam spot for precision and versatility.
LV-NH42
Area type
Long distance
Reliably detects targets with holes or
position variation.
LV-S61 LV-NH62
Spot type
LV-S62 LV-S63
Long-distance
Area type
P.14 transparent
Area beam object detection
Excellent transparent target 35 m 114.8' detection with a
detection with the ability to switch square beam spot to provide stable
between a small spot or area beam. detection of transparent objects.
LV-S71 LV-S72
Spot type
Small: M6 Small: M6
Provides the compact size of
(with slit)
Thrubeam ▲
Cable Type M8 connector Type Zero line Type Monitor output Type
Amplifier part ▲
P.17
12
Reflective model Spot type
Type Appearance (mm inch) Detecting distance (mm inch) Spot diameter (mm inch) Model Dimensions
MEGA : 600 23.62"
ULTRA : 500 19.69"
0.51" 13 SUPER : 400 15.75"
Small size
TURBO : 300 11.81" Approx. ø1.2 ø0.05" LV-S41 [P.18]
25 FINE : 200 7.87" (Up to 500 mm 19.69" distance)
6 0.98"
0.24" HSP : 150 5.91"
0.24" 6 13 0.51"
MEGA : 480 18.9"
1.24" 31.5 ULTRA : 400 15.75"
SUPER : 320 12.6"
Small size, Side view
TURBO : 240 9.45" Approx. ø1.2 ø0.05" LV-S41L [P.18]
FINE : 160 6.30" (Up to 400 mm 15.75" distance)
HSP : 120 4.72"
0.87" 22 12.4 0.49"
0.26" 6.6 MEGA : 1200 47.24"
ULTRA : 1000 39.37"
33 1.30" SUPER : 750 29.53"
Adjustable beam spot
TURBO : 500 19.69" Approx. ø0.8 ø0.03" max. LV-NH32 [P.20]
FINE : 250 9.84" (Up to 300 mm 11.81" distance)
HSP : 200 7.87"
12.4 0.49" MEGA : 750 29.53"
1.42" 36
ULTRA : 600 23.62"
23 0.91"
SUPER : 450 17.72"
Specifications Dimensions
Coaxial structure
TURBO : 300 11.81" Approx. ø2 ø0.08" LV-NH35 [P.21]
FINE : 150 5.91" (Up to 600 mm 23.62" distance)
HSP : 100 3.94"
12.4 0.49"
10.4 0.41"
Adjustment range:
Small size, Adjustable 32 1.26" 50 to 200 1.97" to 7.87"
range (Range in which the reference Approx. ø2 ø0.08" LV-S31 [P.18]
distance can be adjusted) (Up to 200 mm 7.87" distance)
26.5 1.04"
Specifications Dimensions
Type Appearance (mm inch) Detecting distance (mm inch) Area width (mm inch) Model Dimensions
12.4 0.49" MEGA : 1200 47.24"
1.38" 35
ULTRA : 1000 39.37"
SUPER : 750 29.53" Approx. 48×0.4 1.89" × 0.02"
Long distance 0.79" 20 TURBO : 500 19.69" (At 200 mm 7.87" distance)
LV-NH42 [P.21]
FINE : 250 9.84"
HSP : 200 7.87"
LV-S41 LV-S41L
LV-NH32 0.5 0.02"
Spot diameter (mm inch)
With mounting bracket With mounting bracket Accessory Accessory 0.4 0.016"
(front (rear Characteristics of
mounted) mounted) detecting distance
0.3 0.012"
L-shaped mounting and minimum spot
bracket diameter (typical 0.2 0.008"
OP-66846* example)
Specifications Dimensions
0.1 0.004"
L-shaped mounting 0
Accessory 0 100 200 300 400 Distance
bracket OP-66846*
3.94" 7.87" 11.81" 15.75" (mm inch)
LV-NH42 60 2.36"
Grey slit plate
40 1.57"
LV-NH42 Characteristics of No slit plate
Width (mm inch)
* sold separately
13
Retro-reflective Type Spot type
Type Appearance (mm inch) Detecting distance (m feet) Spot diameter (mm inch) Model Dimensions
MEGA : 2.5 8.2'
0.91" 0.33" ULTRA : 2 6.6'
8.5
23 SUPER : 1.5 4.9' Approx. ø2.5 ø0.10"
Small beam spot
TURBO : 1 3.3' (Up to 0.5 m 1.6' distance)
LV-S61 [P.18]
18 FINE : 0.75 2.5'
0.71"
HSP : 0.5 1.6'
All models support the P.R.O. function. The polarizing filter reduces direct reflected light from a mirrored-surface workpiece.
Type Appearance (mm) Detecting distance (m feet) Area width (mm inch) Model Dimensions
All models support the P.R.O. function.The polarizing filter reduces direct reflected light from a mirrored-surface workpiece. *1 Numbers not enclosed in parentheses are the detecting distance
for area spot. Numbers enclosed in parentheses are the detecting distance for small beam spot. To be used for glass detection, we recommend that the detecting distance is set to 1 m or less.
*2 To be used for glass detection, we recommend that the detecting distance is set to 3.5 m or less.
25
Inverse direction 0.98"
mounting
LV-S63 (The detecting distance remains unchanged even if the reflective tape is used.)
*1 Less light intensity variation type (model OP-87123) is also available.
With mounting bracket
(accessory)
4 0.16" 9 0.35"
LV-S61 LV-NH62 8 0.31"
3.5 0.14"
3 0.12" 7 0.28"
Characteristics of Characteristics of
2.5 0.10" 6 0.24"
detecting distance detecting distance
Spot diameter 2 0.08" Spot diameter 5 0.20"
and spot diameter (mm)
and spot diameter (mm) 4 0.16"
(typical example) 1.5 0.06" (typical example) 3 0.12"
1 0.04" 2 0.08"
0.5 0.02" 1 0.04"
0 Distance 0 Distance
0 500 1000 1500 2000 (mm inch) 0 1 2 3 4 5 6 7 8 (m feet)
19.69" 39.37" 59.06" 78.74" 3.3' 6.6' 9.8' 13.1' 16.4' 19.7' 23' 26.2'
14
Thrubeam type Spot type
Type Appearance (mm inch) Detecting distance (mm inch) Spot diameter (mm inch) Model Dimensions
Approx. ø6 ø0.24"
M6 500 19.69"
Position detection (Detecting distance: LV-S72 [P.20]
(Common for all power modes.)
500 mm 19.69")
30.2 1.19"
Specifications Dimensions
Detecting
Type width Appearance (mm inch) Detecting distance (mm inch) Area width (mm inch) Model Dimensions
(mm)
12 0.47"
1.35" 34.2
0.47" 20
1.63" 12 0.79"
10 41.3 Approx. 12 0.47" LV-NH100 [P.22]
20
0.79"
Standard
0.47" 12
1.87" 47.4
0.47" 41
1.67" 12 1.61"
42.5
2000 78.74"
30 (Common for all power Approx. 32 1.26" LV-NH300 [P.22]
Specifications Dimensions
41 modes.)
1.61"
12 0.47"
1.35" 34.2
20
0.47" 0.79"
1.63" 12
High power 10 41.3 Approx. 12 0.47" LV-NH110 [P.22]
0.79"
20
LV-S71 / S72
Specifications Dimensions
Standard mounting Small type mounting Side viewer attachment
bracket (accessory) bracket LV-F1*
OP-66869* Set of 2 pieces
Set of 2 pieces
* sold separately
15
Sensor head specifications
Detecting distance
MEGA 600 mm 23.62" 480 mm 18.9" ULTRA 600 mm 23.62" 1000 mm 39.37"
Detecting distance
ULTRA 500 mm 19.69" 400 mm 15.75" SUPER 450 mm 17.72" 750 mm 29.53" 70±15 mm
SUPER 400 mm 15.75" 320 mm 12.6" 50 to 200 mm
(1.97" to 7.87") TURBO 300 mm 11.81" 500 mm 19.69" 2.76"±0.59"
TURBO 300 mm 11.81" 240 mm 9.45" (Adjustment range) FINE 150 mm 5.91" 250 mm 9.84"
FINE 200 mm 7.87" 160 mm 6.3" HSP 100 mm 3.94" 200 mm 7.87"
HSP 150 mm 5.91" 120 mm 4.72" Ambient temperature -10 to +55ºC (14 to 131ºF) (No freezing)
0 to +50ºC (32 to 122ºF) Relative humidity 35 to 85% RH (No condensation)
Ambient temperature -10 to +50ºC (14 to122ºF) (No freezing)
(No freezing)
Case Glass reinforced plastic
Material
Case Glass reinforced plastic
Material
Detecting distance
ULTRA 1000 mm 39.37" 12 m (6 m) ULTRA 7 m 23'
MEGA 2.5 m 8.2' 35 m 114.8'
SUPER 750 mm 29.53" 39.4' (19.7') SUPER 6 m 19.7'
TURBO 500 mm 19.69" 10 m (5 m) TURBO 5 m 16.4'
ULTRA 2 m 6.6' 30 m 98.4'
Detecting distance*
Material
humidity FINE 0.75 m 2.5' 8 m 26.2' Lens cover Norbornene plastic
8.2' (2.3')
Case Glass reinforced plastic Reflective
Material
Visible red semiconductor laser, Wavelength: MEGA FDA (CDRH) Part 1040.10 Class 1 Laser Product
Light source ULTRA
655 nm IEC 60825-1 Class 1 Laser Product
SUPER
250 mm 9.84" 400 mm 15.75" Visible red semiconductor laser, Wavelength:
Detecting distance
Metal part: Stainless steel, Plastic part: resistance 2 hours in each of X, Y and Z axis directions
Case
Polyarylate Weight Approx. 22 g Lens cover Transmitter: Glass, Receiver: Polyarylate
Material
LV-L01 Specifications (lens attachment for LV-NH42) (Unit: mm inch) Example of “width × thickness” of area in LV-L01 detecting distance
slit 1 slit 2 slit 3 slit 4 (Unit: mm inch)
Name LV-L01
is mounted is mounted is mounted is mounted
LV-NH42 LV-NH42 L01 L01 L01 L01
Distance
MEGA 960 37.8" 840 33.07" 720 28.35" 600 23.62" 480 18.9"
Detecting distance
ULTRA 800 31.5" 700 27.56" 600 23.62" 500 19.69" 400 15.75" LV-NH42 + + LV-L01 + + + +
SUPER 600 23.62" 525 20.67" 450 17.72" 375 14.76" 300 11.81" black slit gray slit slit 1 slit 2 slit 3 slit 4
TURBO 400 15.75" 350 13.78" 300 11.81" 250 9.84" 200 7.87" 100 26×0.6 13×0.6 5×0.6 27×4 20×4 17×4 13×4 10×4
FINE 200 7.87" 175 6.89" 150 5.91" 125 4.92" 100 3.94" 3.94" 1.02"×0.02" 0.51"×0.02" 0.2"×0.02" 1.06"×0.16" 0.79"×0.16" 0.67"×0.16" 0.51"×0.16" 0.39"×0.16"
HSP 160 6.3" 140 5.51" 120 4.72" 100 3.94" 80 3.15" 200 48×0.4 25×0.4 9×0.4 49×7 38×7 32×7 25×7 19×7
50 mm 1.97" 2.6 0.1"
thickness
Area
16
Amplifier
Cable type
Model
Type Appearance Control outputs External input Monitor output Dimensions
NPN output PNP output
Main unit LV-N11N LV-N11P
Standard Main unit 2 1 0
Expansion unit LV-N12N LV-N12P [P.23]
Expansion unit
Monitor output Main unit LV-N11MN − 1 1 1
M8 connector type
Model
Type Appearance Control outputs External input Monitor output Dimensions
NPN output PNP output
Type Appearance Model Control outputs External input Monitor output Dimensions
Specifications Dimensions
Standard Expansion unit LV-N10 None*1 0 0 [P.23]
Specifications Dimensions
Monitor output (LV-N11MN only) 1 to 5 V voltage output; load resistance 10 kΩ or more; repeat precision ±0.5% of F.S.; response time: 1 ms (HIGH SPEED, FINE, TURBO), 1.2 ms (SUPER), 1.8 ms (ULTRA), 4.2 ms (MEGA)
External input Input time 2 ms (ON)/20 ms (OFF) or more*1
Multiple connections to
Up to 17 units can be connected in total (two-output type is treated as two units)
expansion units
Protection circuit Reverse polarity protection, Over-current protection, Surge absorber
Number of interference
Connected to other than LV-S31: 0 for HIGH SPEED; 2 for FINE/TURBO/SUPER; 4 for ULTRA/MEGA, Connected to LV-S31: 2 for FINE; 4 for TURBO/SUPER/ULTRA/MEGA
prevention units*4
Power voltage*5 24 VDC (operating voltage 10-30 VDC (with ripple)), ripple (P-P) 10% or less, Class 2 or LPS*7
Rating
Normal: 830 mW or less (at 30 V. 30 mA at 24 V, 56 mA or less at 12 V)*2 Eco on mode: 710 mW or less (at 30 V. 26 mA at 24 V, 48 mA or less at 12 V)*2
consumption*6 Environmental
Power
NPN
Eco Full mode: 550 mW or less (at 30 V. 21 mA at 24 V, 40 mA or less at 12 V)
Normal: 950 mW or less (at 30 V. 33 mA at 24 V, 60 mA or less at 12 V)*2
PNP Eco on mode: 815 mW or less (at 30 V. 29 mA at 24 V, 52 mA or less at 12 V)*2 −
Eco Full mode: 650 mW or less (at 30 V. 24 mA at 24 V, 40 mA or less at 12 V)
Ambient
resistance
3
-20 to +55°C (-4 to +131°F) (No freezing)*
temperature
Relative
35 to 85% RH (No condensation)
humidity
Vibration
10 to 55 Hz, double amplitude: 1.5 mm 0.06", 2 hours each in the X, Y and Z axis
resistance
Shock
500 m/s2 3 times for each of X,Y and Z axis
resistance
Case Main unit and cover material: Polycarbonate
Material
Specifications Dimensions
Cable PVC
Case size H 32.6 mm 1.28"× W 9.8 mm 0.39" × L 78.7 mm 3.1"
Weight Approx. 75 g Approx. 65 g Approx. 20 g Approx. 20 g Approx. 20 g Approx. 75 g
*1 Input time is 25 ms (ON)/25 ms (OFF) when external calibration time is selected. *2 Increases 30 mW (1 mA) for HIGH SPEED mode.
*3 If more than one unit is used together, the ambient temperature varies with the conditions below. Mount the units on the DIN rail with mounting brackets and check that the output current is
20 mA or less for a unit.
One or two more units connected: -20°C to +55°C (-4°F to + 131°F); 3 to 10 more units connected: -20°C to +50°C (-4°F to + 122°F); 11 to 16 more units connected: -20°C to +45°C
(-4°F to + 113°F). When using 2-outputs, one unit is counted as two units.
*4 These numbers double when “DOUBLE” is selected.
*5 To connect more than 9 units, the power voltage must be 20 V or more.
*6 It increases by 15% when connected to the LV-NH100/NH110/NH300. It does not include the power consumption of the load.
Power consumption when expansion units are connected is the total power consumption of each amplifier unit. Example: When one main unit (LV-N11N) is connected to 2 expansion units
(LV‑N12N) and they are used with LV-NH100 heads in HIGH SPEED mode.
(1.15 × 860 mW × 1) + (1.15 × 860 mW x 2) = 2967 mW max.
*7 Use with the over current protection device which is rated 30 V or more and not more than 1 A.
Brown
Overcurrent protection circuit
Load
Brown*1
Load
Load
Load
Short-circuit
Sensor main circuit
Sensor main circuit
Short-circuit
Black current current
Black (control output 1) 2 mA or less 2 mA or less
Black
(control output 1) (Control output) (Control
output) (control output)
White Device with a 10 kΩ or
White control higher input impedance
(control output 2) output 2 Protection
3.3 VDC 3.3 VDC
Load
circuit
Load
Load
LV-S Series
0.83"
32 Distance setting 0.39" 0.51" 0.39"
1.26" trimmer Center of
13 0.38"
25 0.98"
received light
21.3 0.20" 5 0.04" 1 2 0.08" 11.6 0.46" 9 10
0.84" 27 1.06"
0.51" 9.7 0.35" 0.39"
Center of 2×ø2.5 ø0.10", 2-core shielded
received light 28 1.10" Cable length: 2 m 6.6' 0.19" 4.7 0.7 0.03" 0.04" 1 2 0.08"
0.05" 1.3 4.8 0.19"
0.56" Center of
3 14.3 2-ø3.2 2×ø2.5 ø0.10", 2-core shielded 2×ø2.5 ø0.10", 2-core shielded
0.12" ø0.13" Cable length: 2 m 6.6'
received light 31.5 1.24"
26.5 1.04" 34.5 1.36"
Cable length: 2 m 6.6'
L-shaped mounting bracket for the LV-S31 Mounting bracket for OP-66846
(accessory) the LV-S41 / S41L (accessory) L-shaped mounting bracket for
0.20" the LV-S41 / S41L (sold separately)
5 6.5
0.26"
3.5 21.5 0.85" 0.14" 3.5
0.14" 0.41" 10.4
0.15" 3.7 0.31" 8
10 4 Material: SUS304 0.16" 4 Material: SUS304
0.39" 0.16" t=1.5 0.06" 0.13" 3.2
4 0.20" 5 t=1.0 0.04"
0.16" 24 0.94" 3.5
Material: SUS304 16
22 0.87" 0.63" 12.5 0.13" 3.2 0.16" 4 7 14 0.14"
"
t=1.2 0.05"
4
0.49" 0.14"
R0 1
0.28" 0.55"
.0
R
32 1.40" 0.28" 7
0
32
.8
1.26" 6.7
2-M3, P=0.5 0.26" 0.12" 3 1.26"
R 12.8 2
R1 27.4 6 0.50"
6.2 0.08"
.08 (0.89") (22.7) 0.24"
" 0.24" 0.14" 3.5
* Accessory screws
12.1 10.2 14.5
R2 0.94
0.31" 0.16"
8 4 3.4 0.13" 0.13" M3
OP-84350 3.4
0.62" 16 0.24" 6 When mounting bracket is attached
LV-S62
L-shaped 0.16" 4
6 0.24" 5
mounting bracket 0.43" 11 5 0.20" 0.20"
(sold separately) 0.53" Material: SUS304
2-ø2 ø0.08" 19
13.5 t = 1.5 0.06" 0.9 0.04" 0.9 19
0.75" 0.04" 0.75"
Accessory screws 34 1.34"
M3, P = 0.5×ℓ7.3 0.29" 25 0.98"
52.5 4-R1.7 ···1
2.07" R0.07"
49.5 Material: SUS
1.95" Center of emitted/
32.5 received light
1.28" 0.31" (52.5)
25 8 (2.07")
0.98" Center of emitted/ 43
48.3 received light 1.69"
1.90"
0.20" 5 0.57" 14.5 9.2
0.26" 6.5 Material: SUS304 t = 1.5 0.06" 0.36"
0.31" 8
0.47" 12 25 0.98" 5
0.59" 15 34 1.34" 0.20"
20
0.79"
18
CAD Data Download: www.keyence.com/CADG
Unit : mm inch
OP-84349 L-shaped mounting bracket for the LV-S62 (sold separately)
When mounting bracket is attached
0.51" Material: SUS304
13 t = 1.5 0.06"
(23.3) (0.92")
0.77"
19.5 0.78" 0.26" Accessory screws
4×M3 screw 19.7 6.7
0.61" M3, P = 0.5×ℓ5 0.20"···3
15.5
Material: SUS
4×M3 0.53" 13.4 M3, P = 0.5×ℓ16.5 0.65"···1
21.2
(26.2) 0.83" 29.2 Material: SUS
(1.03") 1.15" M3, P = 0.5×ℓ18 0.71"···2
0.74" 18.8
16 0.63" 51 Material: SUS
60.7
2.39" 2.01"
10 0.39"
6 Accessory nuts
0.24" 12.8
.07 .75
0.50" M3···1
R0×R1
"
Material: SUS
4
4.5
0.18"
9 (20.3)
0.35" (0.80")
12 0.47" (23.5)
(0.93")
24 0.94"
31 1.22"
40 1.57"
Specifications Dimensions
OP-84351 Side mounting bracket for the LV-S62 (sold separately)
0.16" 0.59" When mounting bracket is attached
0.14" 4 15 Material: SUS304
3.5 0.13" 4 0.16"
31.8 1.25"
3.4 4 0.16" t = 1.5 0.06"
5.3 0.21"
18.3 21.9
Accessory screws
3.5 4.5 3.4 0.13"
0.14" 0.18" 0.72" 0.86" M3, P = 0.5×ℓ16.5 0.65"···1
Material: SUS
30 1.18" M3, P = 0.5×ℓ18 0.71"···2
0.45" Center of emitted/
11.5 (25.2) (0.99") Center of emitted/ received light Material: SUS
0.39" 10 10 0.39" M3 screw 41 1.61" received light
Accessory nuts
(30.9)
(1.22") 0.47" 12 4-M3
25.7 M3···1
1.01"
(25.7) 16.7 Material: SUS
(1.01") 15 0.59" 13.8 0.54" 0.66"
Specifications Dimensions
0.39" 10
(1.12")
Specifications Dimensions
2.8 75.4 2.97"
Cable length: 2 m 6.6' 0.11"
Rear mounting bracket for the LV-S63 When mounting bracket is attached
(accessory) 0.76" 19.4
0.35" Material: SUS304
9 4.3 0.17"
t = 2.0 0.08"
0.51" 13 24.9
0.98" Accessory screws
0.31" 8 4.3 M4, P = 0.7×ℓ30 1.18"···3
Center of emitted/
0.27" 7 0.17" received light Material: SUS
0.75" 19 17 0.67"
0.31" 8 31 1.22"
Accessory nuts
M4···3
Material: SUS
36
55 1.42" 4-R2.25 R0.09" 53
2.17" 0.91" 23 2.09"
10° Center of emitted/
10° 0.35" received light
9 28
1.10"
13 0.51"
19
Sensor Head Dimensions
LV-S71 LV-S72
Transmitter 30.2 1.19" ø2.5 ø0.10", Transmitter 30.2 1.19" LV-S71 / S72 0.20" 5 2-slot
side ø0.13" 0.47" 0.28" ø2.5 ø0.10", 0.17" 4.3
2-core shielded side ø0.13" 0.47" 0.28" 2-core shielded Mounting
ø3.2 12 7 ø3.2 12 7
Lens diameter Cable length: 2 m 6.6' Cable length: 2 m 6.6'
Lens diameter bracket 25
6 0.98"
6 0.24" (accessory) 2 8.5
18 0.08" 0.33"
Indicator 0.71"
Indicator 8.5
Across-flats: 10, 0.39" t=2 t=0.08" 0.33"
Across-flats: 10 0.39" t=2 0.08"
M6, P=0.75 M6, P=0.75
SUS303 SUS303
Transmitter 0.08" 2 4.3 ø6.1
Transmitter 0.17" ø0.24"
side 30.2 1.19" ø2.5 ø0.10", side 31.9 1.26" 0.20" 5
ø0.17" 0.47" 0.28" ø2.5 ø0.10",
12 2-core shielded ø0.02" 0.54" 0.28" 2-core shielded
ø4.4 7 ø0.6 13.7 7 M4 screw
Lens diameter Cable length: 2 m 6.6' Cable length: 2 m 6.6'
Slit 23.5
6 0.24" 0.93" 18
6 0.24" 0.71"
Indicator
Indicator
Across-flats: 10, 0.39" t=2 t=0.08"
Across-flats: 10 0.39" t=2 0.08"
Material: SUS304
M6, P=0.75 M6, P=0.75
21.5
0.85" t=1.5 0.06"
SUS303 SUS303
0.52" 0.52"
13.2 13.2
LV-F1 0.28" 7.2 7.2
0.28"
45° 45°
A A A (0.65") (16.4) A
3.2 0.13" (16.4) (0.65") 0.13" 3.2
40.4 40.4
1.59" 1.59"
20.9 0.14"
15.2 15.8 0.82" 20.9 15.8 15.2 3.5
0.60" 0.62" 9.5 9.5 0.82" 0.62" 0.60"
0.37" 0.37"
2.2
3.2 0.09" M2.6 screw M2.6 screw 3.2
0.13" 3.5 2.2 0.13"
0.32" 8.1 0.14" 0.09" 8.1
12 12
1 0.04" M2.6, P=0.45×ℓ6 0.24" screws and 0.47" 0.47" 0.04" 1 0.32"
nuts attached
Material: SUS304
0.52" 0.52"
13.2
OP-66869 7.2
13.2
7.2 0.28"
0.28"
Small mounting bracket for
thrubeam (sold separately) 9.2 0.36" 0.36" 9.2
19 3.2
19 21.2 20.9 0.13"
20.9 0.82" 21.2 0.75"
15.2 15.8 0.75" 0.83" 0.83" 15.8 15.2
0.60" 0.62 0.82" 9.5 0.62" 0.60"
9.5
0.37" 0.37"
3.5
3.2 0.14"
0.13" 3.5 M2.6 screw M2.6 screw
0.32" 0.14" 12 12 8.1
8.1 M2.6, P=0.45×ℓ6 0.24" screws and nuts 0.47" 0.47" 0.32"
0.04" 1 attached 0.04" 1
Material: SUS304
LV-NH32 Mounting bracket for the LV-NH32 (accessory) LV-NH32 (with bracket)
32.5 1.28"
0.55" 29 1.14"
0.87" 14 0.28"
0.28" 7
14 7
22 6.6 0.16" 4 0.14"
3.5 0.55"
4 0.16"
0.14" 3.5 3.5 0.14"
0.24" 6.2 0.26"
0.31" 8
3.5 0.14" 20.7
* Accessory screws 0.81"14.2
2-ø3.2 ø0.13" M3×18 0.71" ···2 pieces 0.56" 5
Trimmer for lock 5 0.2"
(Mounting hole) 0.2"
0.14" ø11.4 15 0.59" 1.2 0.05" 9.6
0.73" 0.24"
18.5 3.5 ø0.45" 6.2 Center of 0.38"
3.5 2-M3×18 0.71"
0.12" 3 emitted light 0.14" 12.4 0.49"
0.39" 10
31.4
33 1.24" 10° 40.5 37.4 31.4
27 0.48" 12.2 40.5
1.59" 1.47" 1.24"
1.06" 1.3"Center of 1.59" 27
29.9 1.06"
received light 1.18"
2×ø2.5 ø0.07", 17.7
2-core shielded 16 3 0.12" 12.4 R31.4
R1.24" 3.7 0.15" 2-M3, P=0.5 0.7" 10
Cable length: 2 m 6.6' 0.63" 0.49" 29 1.14" 14.5 6 0.24" 0.27" 6.9 0.39"
0.57"
Material: SUS304 Material: SUS304
t = 1.2 0.05" t = 1.5 0.06"
20
CAD Data Download: www.keyence.com/CADG
Unit : mm inch
LV-NH35/NH62
Mounting bracket (accessory) LV-NH35 / NH62 (with bracket)
0.98"
Indicator 25 0.49" 25 0.98" 2-M3×18
12.5 4-R1.75 R0.07" 0.28"
0.47" 12 0.31" 8
0.39" 10 7 4 0.16"
0.49" 5 5 0.20" 14.5
21.9
12.4 Center of 36 1.42" 0.20"
4 0.16" 0.86" 14.2
0.57"
17 0.67"
emitted/ 0.93" 0.37" 0.16" 4 10 0.39" 0.56" 23.9
received light 23.5 9.5 0.41" 10.5 0.94"
2-ø3.5 ø0.14" 12 3
0.26" 6.6 3 0.12" 0.12"
0.33" 8.4 * Accessory screws 0.47" 7.5
23 17 0.67" 0.16" 4 3.5 0.14" M3×18 0.71"···2 pieces 0.3"
0.91"
0.41" 10.5 0.33"
8.4
2×ø2.5 ø0.07", 16.4 17.5
2-core shielded 2-ø3.2 ø0.13" 0.65" 0.69" 31
0.41" 10.5 1.22" 19.5
Cable length: 2 m 6.6' (Mounting hole) 25.5 0.77"
1.00"
4-R1.75 4
R0.07" 16.4 0.16" 14.5 2-M3, P=0.5
0.65" 0.57"
17.5 Material: SUS304 Material: SUS304
0.69" t = 1.2 0.05" t = 1.5 0.06"
0.98"
Reflector R-6 Reflector R-7 Reflective tape 25
Specifications Dimensions
t=0.7 0.03"
5.5 0.22" 45 1.77" 0.17" 24 0.94"
23 0.91" 4.2 0.28"
7
29.4 14.7
0.58" 6
1.16" 23 0.91"
0.24" 7 12 0.47"
2-ø3.2 0.28"
37 1.46" 2-ø3.2 ø0.13"
ø0.13" 17.2
0.68"
LV-NH37
Mounting bracket for the LV-NH37 (accessory) LV-NH37 (with bracket)
33 1.30"
12.4 24 0.94" 12.5±5
0.49"±0.2"
0.49" 12.5
2-ø3.2 ø0.13" (0.24") 0.24" (0.47") 0.49" 0.24" 6 0.63" 16
(Mounting hole) (6.2) 6.2 (12) Center of 10 0.39"
emitted light ø0.14"
0.14" 3.5
8 0.31" ø3.5 2-M3×18 0.71"
0.55" 14 0.14" 3.5 * Accessory screws 36.7 1.44"
18.5
Specifications Dimensions
34.5 1.36" M3×18 0.71"···2 pieces 0.33" 26.9 1.06"
0.31" 8 0.73" 8 0.31" 8.4
16 10
0.63" 0.39" 0.38" 9.7 12
40
0.3" 10 0.31" 8 1.57" 14.7 0.47"
2.76" ±0.59" Center of received light 0.39" 23.9 17.9 20.7 0.58"
16 7.5 70±15 6 0.24"
0.94" 0.70" 0.81"
0.63" 2×ø2.5 ø0.07",
Reference position for measurement
26.5 1.04" 2-core shielded
0.31" 8 14.5 2-M3, P=0.5 0.14" 3.5 10 10
3.5
0.14"
Cable length: 2 m 6.6' 0.57" 0.39" 0.39"
Material: SUS304 Material: SUS304
33 1.30"
t = 1.2 0.05" t = 1.5 0.06"
LV-NH42
Mounting bracket for the LV-NH42 (accessory) LV-NH42 (with bracket)
Indicator 0.83"
21 0.83" 21
7 0.28" 7 0.28"
0.24" 6 4 0.16"
(0.47") (12) 0.14" 6 0.24"
3.5 4 0.16"
0.49" Attachment mounting section 20.7 5 14.5
0.31" 8 0.81"14.2 0.2" 0.57"
12.4 35 1.38" 0.12" 3.5 0.14"
0.56"
Center of 0.89" 0.37" 3
emitted light 0.2" 5 0.69" * Accessory screws
0.20" 22.5 9.5 ø0.13" 2-ø3.2 9.6
Center of 17.5 M3×18 0.71" ···2 pieces 0.38"
5 0.14" 3.5 3.5 0.14" 2-M3×18 0.71"
Specifications Dimensions
received light
20 Indicator
8 14 0.55" (12) (0.47")
8
0.31" 0.79" 18.3 16.6 0.31" 16.9 18.1
2×ø2.5 0.1", 2-core 0.72" 0.65" 0.67" 0.71" 28 22.9 16.9 28 14
shielded 1.1" 0.9" 0.67" 1.1"22.5 0.55"
Cable length: 2 m 2-ø3.2 ø0.13" 0.89"14.5
(Mounting hole) 3.3 0.13"
0.57" 7.5 0.3"
0.13" 3.3 7.2 0.28"
2-M3, P=0.5 10.5 0.41"
8.9 0.35" 14.5 6 0.24"
0.67" 16.9 0.57"
0.71" 18 Material: SUS304 Material: SUS304
t = 1.2 0.05" t = 1.5 0.06"
When a slit included with LV-NH42 is attached When LV-L01 is attached (LV-NH42) Slit seal (Included with the LV-L01)
0.24" 0.46"
Slit width Slit width 0.04" 6 0.08" 0.04" 1.6 0.06" 11.8
1.5 0.06" 0.5 0.02" 1 1.5 0.06" 2 1 1 0.04" 0.13" L Slit sticker
L
3.3 name
5.4
22 0.23" 5.9 slit 1 2.6 0.10"
22 0.21"
slit 2
0.87" 0.87" 2.0 0.08"
slit 3 1.5 0.06"
1 0.04"
2.7 0.11" slit 4 1.1 0.04"
Slit (Black) Slit (Gray)
21
Sensor head Dimensions
LV-NH100 / NH110 LV-B101 (bracket, transmitter, and receiver set for the
LV-NH100 / NH110)
Transmitter Receiver 33.5 1.32" Material: SUS304 Plate nut for the transmitter
Indicator Indicator 0.14" 3.5 t = 1.2 t=0.05"
Supplied screws:
0.31" 8 30.4 M3×18 0.71" (2 pcs.)
0.47" 12 12 0.47" 0.20" 5
3.5 0.14"
1.20"
Center of Center of Material: SUS304
emitted light
0.49" 41.3 1.63" 34.2 1.35" 0.49" received light 0.16" 4 4 0.16" 24.4
t = 1.5 t=0.06"
18.5 0.73" 0.96"
12.4 0.35" 0.79" 0.66" 0.57" 12.4 0.35" 8.8 20 0.79"
8.8 20 16.8 14.4
0.14" 3.5 3.5 0.14"
3 0.12" 0.12" 3 2-ø3.5 ø0.14" 2-M3, P=0.5
10 0.39" 0.24" 6
20 14 0.55" 0.55" 14 20
0.39" 10 0.79" 0.79" 14 14 0.55" 27.5 Plate nut for the receiver
0.55"
ø2.5 ø0.1", 1.08"
ø2.5 ø0.1", 2-ø3.2 ø0.13" 2-ø3.2 ø0.13"
2-core shielded 2-core shielded Supplied screws:
(Mounting hole) (Mounting hole) 4-R1.75 10° 27.9 M3×18 0.71" (2 pcs.)
Cable length: 2 m 6.6' Cable length: 2 m 6.6' R0.07" 1.10"
16.8 0.66" 10° 14.5 0.57" Material: SUS304
21.9
0.86" t = 1.5 t=0.06"
(34.1)
(32.4) (1.34")
(1.28")
(24.7)
(0.97")
2-M3, P=0.5
0.24" 6
7°
55.4 2.18" (32.4) (34.1)
3.5 0.14" (1.28") (1.34")
R1.75 R0.07" (24.7)
(0.97")
22
Amplifier Dimensions CAD Data Download: www.keyence.com/CADG
Unit : mm inch
LV-N11N / N11P / N11MN Cable type, Main unit LV-N12N / N12P Cable type, Expansion unit
2
ø3.9 ø0.15", 5-core × Brown/Blue: 0.34 mm ,
Black/White/Pink: 0.18 mm2* ø3.9 ø0.15", 3-core×Black/White/Pink: 0.18 mm2
Cable length: 2 m 6.56' Cable length: 2 m 6.56'
9.8 9.8
0.39" 0.39"
170° max.
Maximum 5.2 Maximum 5.2
when the cover 0.2" when the cover 0.2"
is opened: is opened:
108.7 4.28" 108.7 4.28"
32.6 32.6
1.28" 1.28"
(37.6) (37.6)
(1.48") (1.48")
(13) (0.51") (13) (0.51")
LV-N11CN / N11CP M8 connector type, Main unit LV-N12CN / N12CP M8 connector type, Expansion unit
Specifications Dimensions
9.8 ø8.6 ø0.34" 9.8 ø8.6 ø0.34"
0.39" 0.39"
170° max.
Maximum 5.2
5.2 Maximum 0.2"
when the cover 0.2" when the cover
is opened: is opened:
108.7 4.28" 108.7 4.28"
32.6 32.6
1.28" 1.28"
(37.6) (37.6)
(1.48") (1.48")
(15.5) (0.61") (15.5) (0.61")
M8
27.5 35.4 M8 connector 27.5 35.4 connector
1.08" 1.39" 1.08" 1.39"
78.7 9.5 0.37" 78.7 9.5 0.37"
3.1" 3.1"
M8 connector cable (OP-73864 / 73865 sold separately) M8 connector junction cable (OP-85498 sold separately)
ø3.7 ø0.15", 6.7 0.26"
Cable L 6.2 0.24"
4-core×0.28 mm2 ø9.5 ø0.37" ø3.7 ø0.15" 4×0.28 mm2 ø0.35" ø9
length (m foot)
ø9.5 ø9 M8×1
OP-73864 2 6.56'
Specifications Dimensions
0.37" ø0.35"
OP-73865 10 32.8' (26.7) 26.7 26.2
1.05" L 1.05" 1.03"
2000 78.74"
LV-N10 Zero line type, Expansion unit OP-87199 Conversion adaptor When the end unit is attached
(OP-26751 sold separately)
Maximum 5.2
when the cover 0.2"
is opened:
DIN-rail mounting
108.7 4.28"
32.6 25
(29.5) 0.98"
(37.6)1.28" (1.16") (22.6) 20.8
(1.48") (0.89") 0.82"
20.7 35.4
27.5 35.4 0.81" 1.39" 9.2 35.4
1.08" 1.39" 69.8 0.36" 1.39"
Specifications Dimensions
78.7 2.75" 53.8
3.1" 2.12"
Common for all types Material: Polycarbonate
No. of
When the mounting bracket is attached (OP-73880 sold separately)
When several units are connected: L (mm inch)
units Cable type Reverse side of mounting
1 9.8 0.39" bracket
2-(4.4×3.4)
2 19.6 0.77" (0.17" x 0.13")
End unit End unit *1
3 29.4 1.16" Spot facing: ø7.2 ø0.28",
32.6 d=3.2 0.13"
4 39.2 1.54" 1.28"
(40.9)
5 49.0 1.93" (1.61")
9.8 0.39"
6 58.8 2.31" (16.3)
(0.64")
7 68.6 2.7" 15
0.59"
8 78.4 3.09" 29.8 6.5 2-ø3.4 ø0.13"
31
3.8 1.22"
9 88.2 3.47" 0.15" 1.17" 0.26" Spot facing: ø6.4 ø0.25", d=2.7 0.11"
32.6 25.4 Material: Polycarbonate
10 98.0 3.86" 1.28" 1"
11 107.8 4.24" M8 connector type
12 117.6 4.63"
13 127.4 5.02"
32.6
14 137.2 5.4" (1.28")
15 147.0 5.79" (40.9)
(1.61")
6 L 6 16 156.8 6.17" (18.8)
0.24" 0.24"
17 166.6 6.56" (0.74")
*1 End units must be used when several units are connected.(OP-26751) 2-ø3.4 ø0.13"
3.8 29.8 6.5
0.15" 1.17" 0.26" Spot facing: ø6.4 ø0.25", d=2.7 0.11"
32.6 25.4
1.28" 1"
23
Digital Fiberoptic Sensor
A high-function amplifier and vast array of sensor head options provide easy solutions for
the most challenging detection conditions.
FUNCTION
Extensive variety of
1 NEO Preset Reduced wiring
fiberoptic units
Simply press the PRESET button to
The fiberoptic series has the largest selection of
change the light intensity display to 100 Interference prevention
sensor head options which provide a vast range of
installation methods and detection solutions.
or 0 to complete the sensitivity settings. function
24
The wide variety of fiber head options provide solutions
to a vast range of mounting needs and application
conditions.
Mounting options
Specifications Dimensions
Detection options
Specifications Dimensions
Oil/Water High temperature Vacuum Chemical
environments environments environments environments
Specifications Dimensions
required. The most powerful of these modes is “MEGA Mode”. The power can be increased 64-fold from normal power by
simply using 1 switch.
25
Automatic maintenance DATUM function
The automatic maintenance function
detects light intensity reduction due to dirt y Conventional correction function y DATUM function
or misalignment, and returns the sensor (DSC)
to its original display state. This feature Light intensity Light intensity
display display
can cancel the effects of the ambient 4095 100.0
environment, enabling continuous and Current
value
highly accurate detection.
Setting
2000 50.0
value
As build-up occurs, the setting value
changes according to light intensity. Datum
corrects the setting value based on a running Time Time
average of this received light intensity value.
The current value and setting value Both the current and setting values remain
Since the display values are scaled, the change, making it difficult to tell constant on the display, making it clear
current value is displayed as an even “100.0” whether a target is present. whether a target is present.
rather than an arbitrary value, making target
presence evident.
Excess light intensity causes the display Light transmission level and light
value to go off the scale. intensity gain are automatically calibrated
so stable detection can be achieved.
Use the Saturation Avoidance function in the Simply press MODE and SET at the same
following examples time.
26
KEYENCE Reduced wiring link
Conventional sensors can also be connected for a dramatic
reduction in wiring and installation time.
By using the OP-87199 conversion connector 4 on conventional KEYENCE sensors, the NEO Series
sensors can easily be connected to significantly reduce wiring and installation time.
Specifications Dimensions
1 FS-NEO Series
2 LV-NEO Series
3 PS-NEO Series
4 OP-87199
5 CZ-V20 Series
6 ES Series
7 AP-V Series
1 2 3 4 5 6 7
Specifications Dimensions
Conventional sensors
Support for open field networks via the sensor input unit
The NEO Series 2 3 4 is able to support open field networks by using the NU Series 1 .
Conventional sensors 7 8 9 are supplied with power simply by connecting expansion units.
The sensor output information can be transmitted by connecting e-CON to the NU-EN8N sensor input unit 5 .
Conventional sensors
1 NU Series
Specifications Dimensions
2 LV-NEO Series
3 FS-NEO Series
4 PS-NEO Series
5 NU-EN8N
6 OP-87199
7 ES Series
8 AP-V Series
9 CZ-V20 Series
1 2 3 4 5 6 7 8 9
27
LINEUP Fiber unit variation supports a vast range of detecting conditions
Thrubeam type P.29 Reflective model P.34 Thrubeam type P.29 Reflective model P.35 Thrubeam type P.30 Reflective model P.35
▲
▲
▲
Small Spot Reflective Focused Beam/High power
Small Spot/Focused
▲
Retro-reflective Definite-reflective
Transparent object
Retro-reflective
P.40 Reflective model P.37
▲
Type
Thrubeam type P.31 Reflective model P.37 Thrubeam type P.31 Reflective model P.38
▲
Thrubeam type P.32 Reflective model P.38 Thrubeam type P.32 Reflective model P.39 Thrubeam type P.32 Reflective model P.39
▲
Thrubeam type P.33 Reflective model P.40 Reflective model P.40 Thrubeam type P.41
▲
Type
P.42
28
Thrubeam type Standard/Simple Mounting Type
shaped
FINE target to be (mm)*2
detected)
Specifications Dimensions
1 m 3.3' cut not allowed R10 MEGA : 1800 70.87" ULTRA : 1800 70.87"
Benefits! Threaded
-40 to +50°C
(-40 to +122°F)
R0.39" FINE : 880 34.65" SUPER : 1800 70.87" ø0.005 FU-77G
[P.47]
22 0.87" Stainless Lens TURBO : 1300 51.18" ø0.0002" Approx. 39 g
With the hex-shaped Steel attachment [P.33] HSP : 430 16.93"
M4
fiber, one end is
secured with a nut, 2 m 6.6' Free-cut (ø2.2) (ø0.09") MEGA : 3600 141.73" ULTRA : 3200 125.98"
-40 to +70°C R25 FINE : 1100 43.31" SUPER : 2200 86.61" FU-7F
making installation (-40 to +158°F) [P.47]
R0.98" Lens TURBO : 1500 59.06" Approx. 21 g
easier. 15 0.59"
attachment [P.33] HSP : 540 21.26"
M4 ø1
2 m 6.6' Free-cut (ø1.3) (ø0.05") MEGA : 2200 86.61" ø0.04"
Stainless steel braided ULTRA : 1400 55.12"
-40 to +70°C R4 FINE : 440 17.32" SUPER : 860 33.86" FU-78
cable is recommended (-40 to +158°F) [P.48]
in areas where the R0.16" Lens TURBO : 600 23.62" Approx. 9 g
15 0.59"
attachment [P.33] HSP : 220 8.66"
fiber can be damaged M4
due to machine 2 m 6.6' Free-cut (ø2.2) (ø0.09") ULTRA : 3600 141.73"
FU-71Z: -40 to +50°C (-40 to +122°F) R2
operator activity. MEGA : 3600 141.73" SUPER : 2300 90.55" FU-71Z
FU-71: -40 to +70°C (-40 to +158°F) R0.08" [P.47]
FINE : 1100 43.31" TURBO : 1600 62.99 Approx. 25 g
ToughFlex
HSP : 590 23.23"
ø1.5
M6 Threaded M6 ø0.06"
16 0.63" ULTRA : 3600 141.73"
R25 MEGA : 3600 141.73" SUPER : 2600 102.36" FU-71
Specifications Dimensions
[P.47]
R0.98" FINE : 1300 51.18" TURBO : 1800 70.87" Approx. 25 g
HSP : 650 25.59"
*1 When using the FS-N Series. “3600 mm 141.73"” is assumed as maximum because the fiber cable has a length of 2 m 6.6'.
*2 The smallest detectable object was determined at the optimal detecting distance and sensitivity setting.
Specifications Dimensions
Installed by drilling a 1 m 3.3' Free-cut (ø1.0) (ø0.04") R2 ULTRA : 430 16.93"
hole and using a set -40 to +50°C R0.08" MEGA : 590 23.23" SUPER : 300 11.81" ø0.5 FU-59U
screw. (-40 to +122°F) 10 0.39" [P.47]
ToughFlex FINE : 140 5.51" TURBO : 180 7.09" ø0.02" Approx. 4 g
ø1.5 ø0.06"
Suitable for installation in High-flex HSP : 55 2.17"
locations where space is ø1.5 ø0.06"
1 m 3.3' Free-cut (ø1.0) (ø0.04") ULTRA : 810 31.89"
limited. -40 to +70°C R4
MEGA : 1200 47.24" SUPER : 590 23.23" ø0.7 FU-59
(-40 to +158°F) R0.16" [P.46]
10 0.39" FINE : 230 9.06" TURBO : 410 16.14" ø0.03" Approx. 3 g
ø1.5 ø0.06" High-flex
HSP : 130 5.12"
ø0.005
50 cm 19.69" cut not allowed ø0.0002"
-40 to +70°C FU-55
(-40 to +158°F) Approx. 3 g
10 0.39" ULTRA : 32 1.26"
ø2.5 ø0.10" R10 MEGA : 45 1.77" SUPER : 23 0.91" ø0.125
ø2.5 ø0.10" 50 cm 19.69" cut not allowed
[P.46]
R0.39" FINE : 13 0.51" TURBO : 18 0.71" ø0.005"
-40 to +70°C ø0.3 ø2.5 ø0.10" HSP : −
FU-56
(-40 to +158°F) ø0.01"
10 0.39" Approx. 3 g
5 0.20"
Do not bend sleeve
2 m 6.6' Free-cut (ø2.2) (ø0.09") ULTRA : 3000 118.11"
-40 to +50°C R2
MEGA : 3600 141.73" SUPER : 1800 70.87" ø1.13 FU-5FZ
(-40 to +122°F) R0.08" [P.46]
14 0.55" FINE : 880 34.65" TURBO : 1300 51.18" ø0.04" Approx. 19 g
ToughFlex
ø3 ø0.12" HSP : 430 16.93"
ø3 ø0.12"
2 m 6.6' Free-cut (ø2.2) (ø0.09") ULTRA : 3200 125.98"
-40 to +70°C R25 MEGA : 3600 141.73" SUPER : 2200 86.61" ø1 FU-5F
(-40 to +158°F) [P.46]
15 0.59" R0.98" FINE : 1100 43.31" TURBO : 1500 59.06" ø0.04" Approx. 19 g
ø3 ø0.12" HSP : 540 21.26"
*1 When using the FS-N Series. “3600 mm 141.73"” is assumed as maximum because the fiber cable has a length of 2 m 6.6'.
*2 The smallest detectable object was determined at the optimal detecting distance and sensitivity setting.
29
Thrubeam/Standard/Simple Mounting Type
*1 When using the FS-N Series. “3600 mm 141.73"” is assumed as maximum because the fiber cable has a length of 2 m 6.6'.
*2 The smallest detectable object was determined at the optimal detecting distance and sensitivity setting.
Focused Cable
Detecting distance (mm)*1 Optical axis
diameter Minimum
Fiber unit length (Diameter)
Beam / High Beam
Aperture
Ambient temperature
bend
radius MEGA
(mm)
(Standard
Detectable
object
Model /
Weight
Dimensions
emitting Appearance (mm) Other power modes
power direction
angle (mm) FINE target to be
detected)
(mm)*2
Approx. 6°
ø0.16"
ø4
ULTRA : 3600 141.73"
MEGA : 3600 141.73" SUPER : 3600 141.73" ø2.5 ø0.1 FU-16
[P.44]
FINE : 1900 74.80" TURBO : 2700 106.30" ø0.10" ø0.004" Approx. 8 g
13 0.51" HSP : 1000 39.37"
Use of a lens narrows
17 0.67"
beam width and helps
Side
avoid deflection.
ULTRA : 3600 141.73"
R10 MEGA : 3600 141.73" SUPER : 3000 118.11" FU-18
Approx. 2° [P.44]
R0.39" FINE : 1600 62.99" TURBO : 2100 82.68" Approx. 8 g
HSP : 960 37.80"
*1 When using the FS-N Series. “3600 141.73"” is assumed as maximum because the fiber cable has a length of 2 m 6.6'.
*2 The smallest detectable object was determined at the optimal detecting distance and sensitivity setting.
30
Thrubeam type Space-Saving Type
Specifications Dimensions
Thickness 2.5 0.10" ø0.5
Metal housing 1 m 3.3' Free-cut (ø1.0) (ø0.04") ø0.02"
eliminates concern -40 to +50°C (-40 to +122°F)
ULTRA : 340 13.39"
about damaged 0.28" 7
ø0.08" MEGA : 500 19.69" SUPER : 230 9.06" FU-53TZ
0.51" 13 2-ø2.1 [P.46]
sensors. The sensor FINE : 140 5.51" TURBO : 180 7.09" Approx. 10 g
and case form a flat HSP : 80 3.15"
Thickness 2 0.08"
surface, so there are
Flat
no openings where 2 m 6.6' Free-cut (ø2.2) (ø0.09")
dust and other foreign -40 to +50°C 7 0.28" ULTRA : 1900 74.80"
matter can enter. (-40 to +122°F) MEGA : 2900 114.17" SUPER : 1200 47.24" ø1 FU-54TZ
0.59" 15 2-M3 FINE : 610 24.02" TURBO : 850 33.46" ø0.04" Approx. 25 g
HSP : 260 10.24"
Thickness 4 0.16"
FU-51TZ/52TZ can
also be used as side-
Specifications Dimensions
view fibers.
FU-51TZ FU-52TZ
Sleeve Cable
Detecting distance (mm)*1 Optical axis
diameter Minimum
Fiber unit length (Diameter)
bend (mm) Detectable Model /
Ambient temperature Dimensions
Beam emitting radius MEGA (Standard object Weight
Appearance (mm) Other power modes
direction (mm) FINE target to be (mm)*2
detected)
1 m 3.3' Free-cut (ø1.3) (ø0.05")
-40 to +70°C ø0.10" ø2.5 ULTRA : 380 14.96"
(-40 to +158°F) MEGA : 520 20.47" SUPER : 230 9.06" ø0.6 FU-32
ø0.03" ø0.82 [P.44]
FINE : 100 3.94" TURBO : 160 6.30" ø0.02" Approx. 5 g
15 0.59" HSP : 55 2.17"
15 0.59"
Do not bend sleeve
The fiber tip is Side
2 m 6.6' Free-cut (ø2.2) (ø0.09")
incorporated into a -40 to +70°C 0.59" ULTRA : 1100 43.31"
thin sleeve. (-40 to +158°F) 15
R25 MEGA : 1600 62.99" SUPER : 660 25.98" FU-34
65 2.56"
ø3 ø0.12" [P.45]
R0.98" FINE : 330 12.99" TURBO : 470 18.50" Approx. 17 g
Specifications Dimensions
ø1.2 ø0.05" HSP : 140 5.51"
Min. bend radius of sleeve: R25 R0.98" ø1
2 m 6.6' Free-cut (ø2.2) (ø0.09") ø0.04"
Benefits! -40 to +70°C M4
(-40 to +158°F) ULTRA : 3200 125.98"
15 0.59"
ø1.65 ø0.06" MEGA : 3600 141.73" SUPER : 2200 86.61" FU-73
Some long sleeve [P.47]
67 2.64" FINE : 1100 43.31" TURBO : 1500 59.06" Approx. 24 g
fibers allow for Min. bend HSP : 540 21.26"
bending. (See the radius of sleeve:
R10 R0.39" ø0.005
dimensions diagram ø0.0002"
1 m 3.3' Free-cut (ø1.0) (ø0.04")
for bend radius) -40 to +70°C M3
ø0.82 ø0.03" ULTRA : 500 19.69"
(-40 to +158°F) MEGA : 690 27.17" SUPER : 340 13.39" ø0.5 FU-75F
15 0.59" [P.47]
15 0.59" FINE : 170 6.69" TURBO : 240 9.45" ø0.02" Approx. 10 g
HSP : 72 2.83"
Do not bend sleeve
Top
1 m 3.3' Free-cut (ø1.0) (ø0.04")
-40 to +70°C ø0.12" ø3
(-40 to +158°F) ULTRA : 260 10.24"
15 0.59" R10 MEGA : 370 14.57" SUPER : 180 7.09" ø0.265 FU-76F
ø0.4 ø0.02" [P.47]
45 1.77" R0.39" FINE : 85 3.35" TURBO : 120 4.72" ø0.01" Approx. 10 g
HSP : 40 1.57"
Min. bend radius of
sleeve: R10 R0.39"
50 cm 19.69" cut not allowed
-40 to +70°C ø0.10" ø2.5 ULTRA : 32 1.26"
ø0.3
(-40 to +158°F) ø0.01" MEGA : 45 1.77" SUPER : 23 0.91" ø0.125 FU-56
10 0.39" [P.46]
FINE : 13 0.51" TURBO : 18 0.71" ø0.005" Approx. 3 g
5 0.20"
HSP : −
Do not bend sleeve
*1 When using the FS-N Series. “3600 mm 141.73"” is assumed as maximum because the fiber cable has a length of 2 m 6.6'.
*2 The smallest detectable object was determined at the optimal detecting distance and sensitivity setting. 31
Thrubeam type Environment-proof
* 1 When using the FS-N Series. * 2 The smallest detectable object was determined at the optimal detecting distance and sensitivity setting.
2 m 6.6' Free-cut (ø2.2) (ø0.09") MEGA : 3600 141.73" ULTRA : 2200 86.61"
-40 to +100°C R5 FINE : 680 26.77"
100°C*4 (-40 to +212°F) SUPER : 1600 62.99" FU-86Z
(212˚F)
R0.20" [P.48]
15 0.59" ToughFlex Lens TURBO : 900 35.43" Approx. 25 g
M4 attachment [P.33] HSP : 390 15.35" ø1
2 m 6.6' Free-cut (ø2.2) (ø0.09") MEGA : 3600 141.73" ULTRA : 3200 125.98" ø0.04"
-40 to +105°C FINE : 1100 43.31"
105°C*4 (-40 to +221°F) R25 SUPER : 2200 86.61" FU-86A
(221˚F) R0.98" Lens [P.48]
TURBO : 1500 59.06" Approx. 22 g
15 0.59"
M4 attachment [P.33] HSP : 540 21.26"
2 m 6.6' Free-cut (ø2.2) (ø0.09") ULTRA : 1800 70.87"
-40 to +150°C
150°C*5 (-40 to +302°F) R20 MEGA : 2700 106.30" SUPER : 1100 43.31" FU-86H
[P.48]
Suited for use at high (302˚F) 17 0.67" R0.79" FINE : 520 20.47" TURBO : 720 28.35" Approx. 35 g
temperatures of up to M4 HSP : 340 13.39" ø1.5 ø0.005
300°C (572°F). 2 m 6.6' Free-cut (ø2.2) (ø0.09") ULTRA : 1900 74.8" ø0.06" ø0.0002"
-60 to +180°C
180°C*6 (-76 to +356°F) R35 MEGA : 2700 106.30" SUPER : 1200 47.24" FU-88
(356˚F) R1.38"
[P.48]
17 0.67" FINE : 570 22.44" TURBO : 790 31.10" Approx. 36 g
M4 HSP : 380 14.96"
2 m 6.6' cut not allowed
-40 to +200°C
200°C (-40 to +392°F) R8 FU-88K
(392˚F)
10 0.39"
R0.32"
[P.48]
15 0.59" MEGA : 1800 70.87" ULTRA : 1300 51.18" Approx. 30 g
M4 FINE : 390 15.35" SUPER : 900 35.43" ø1
2 m 6.6'cut not allowed Lens TURBO : 680 26.77" ø0.04"
-40 to +300°C attachment [P.33] HSP : 250 9.84"
300°C (-40 to +572°F) R25 FU-84C
(572˚F) 10 0.39"
R0.98"
[P.48]
15 0.59" Approx. 66 g
M4
*1 When using the FS-N Series. “3600 mm 141.73"” is assumed as maximum because the fiber cable has a length of 2 m 6.6'.
*2 The smallest detectable object was determined at the optimal detecting distance and sensitivity setting.
*3 Use the fiberoptic sensor under dry conditions. Allow some margin for the temperature upper limit when selecting a heat-resistant fiber unit.
*4 The recommended maximum ambient temperature during operation is 90°C (194°F) when constantly using a fiber unit in a high-temperature environment.
*5 The recommended maximum ambient temperature during operation is 130°C (266°F) when constantly using a fiber unit in a high-temperature environment.
32 *6 The recommended maximum ambient temperature during operation is 150°C (302°F) when constantly using a fiber unit in a high-temperature environment.
Thrubeam type Dedicated application type
Area Detecting
Fiber unit length (Diameter)
Ambient temperature
Cable bend
radius
Detecting distance (mm)*1
MEGA
Optical axis
diameter
Model /
Dimensions
Type Other power modes Weight
width Appearance (mm) (mm) FINE (mm)
Thickness 4 0.16" 0.59" 15
2 m 6.6' Free-cut
5 mm (ø2.2) (ø0.09") FU-A05
Approx. 6×0.3 [P.49]
0.20" -40 to +70°C 0.59" 15 Approx. 20 g
ULTRA : 1400 55.12"
(-40 to +158°F) 2
R4* MEGA : 2200 86.61" SUPER : 840 33.07"
Array
Thickness 4 0.16" 0.79" 20 R0.16" FINE : 440 17.32" TURBO : 540 21.26"
2 m 6.6' Free-cut HSP : 200 7.87"
10 mm (ø2.2) (ø0.09") 20 FU-A10
Approx. 11×0.3 [P.49]
0.39" -40 to +70°C 0.79" Approx. 20 g
(-40 to +158°F)
Useful in situations
Thickness 4.2 0.17" 20 0.79" ULTRA : 2800 110.24"
where target position 2 m 6.6' Free-cut
10 mm (ø2.2) (ø0.09") 20 MEGA : 3400 133.86" SUPER : 2400 94.49" FU-12
varies. 0.39" FINE : 1400 55.12" TURBO : 1700 66.93"
10×3 [P.44]
-40 to +50°C Approx. 23 g
(-40 to +122°F) 0.79" HSP : 640 25.20"
Thickness 4 0.16" 29.8 1.17"
ULTRA : 3600 141.73"
2 m 6.6' Free-cut R2
11 mm (ø2.2) (ø0.09") MEGA : 3600 141.73" SUPER : 3600 141.73" FU-E11
Area 10.5 R0.08" 11×2 [P.49]
0.43" -40 to +50°C FINE : 2700 106.30" TURBO : 3600 141.73" Approx. 20 g
ToughFlex
(-40 to +122°F) 0.41" HSP : 1300 51.18"
Thickness 5.1 0.20" 69 2.72"
ULTRA : 3600 141.73"
2 m 6.6' Free-cut
Specifications Dimensions
40 mm (ø2.2) (ø0.09") 19.5 MEGA : 3600 141.73" SUPER : 3600 141.73" FU-E40
1.57"
40×3 [P.49]
-40 to +50°C 0.77" FINE : 3600 141.73" TURBO : 3600 141.73" Approx. 30 g
(-40 to +122°F) HSP : 2500 98.43"
*1 When using the FS-N Series. “3600 mm 141.73"” is assumed as maximum because the fiber cable has a length of 2 m 6.6'.
*2 R10 for the first 10 mm of cable from the housing.
Specifications Dimensions
*1 When using the FS-N Series. “3600 mm 141.73"” is assumed as maximum because the fiber
cable has a length of 2 m 6.6'.
Specifications Dimensions
-40 to +300°C FU-77TZ/77V/77/84C/88K 3600 mm 141.73" 2100 mm 82.68"
(-40 to +572°F)
Tip: ø4 ø0.16" FU-7F/86A 3600 mm 141.73" 2500 mm 98.43"
Long detecting Set of 2
F-2
Aperture Angle: FU-86Z 3600 mm 141.73" 1900 mm 74.80"
Approx. 2 g
Approx. 15° [P.50]
FU-78 3600 mm 141.73" 3300 mm 129.92" 1600 mm 62.99"
7.9 0.31"
FU-77G/77TG 1800 mm 70.87"
-40 to +105°C Locking Nut FU-77V/77 2600 mm 102.36"
(-40 to +221°F)
FU-7F/86A 3100 mm 122.05"
With mounting Set of 2 3600 mm 141.73"
F-5
holes FU-86Z 2900 mm 114.17"
Approx. 10 g
Side view [P.50]
5.6 0.22" FU-78 2300 mm 90.55"
9.3
0.37" 16.7 0.66" FU-77G 1800 mm 70.87"
2
-40 to +70°C (-40 to +158°F)* FU-77V/77 3600 mm 141.73" 3100 mm 122.05" 1900 mm 74.80" 1300 mm 51.18" 900 mm 35.43" 530 mm 20.87"
Tip: ø4 ø0.16" FU-77G 1800 mm 70.87" 1300 mm 51.18" 900 mm 35.43" 530 mm 20.87"
Set of 2
F-1
Side view FU-7F/86A 3600 mm 141.73" 3100 mm 122.05" 2100 mm 82.68" 1300 mm 51.18" 630 mm 24.80"
Approx. 2 g
[P.50]
FU-86Z 3600 mm 141.73" 3300 mm 129.92" 2300 mm 90.55" 1500 mm 59.06" 1100 mm 43.31" 500 mm 19.69"
9.5 0.37"
FU-78/84C/88K 3200 mm 125.98" 2500 mm 98.43" 1600 mm 62.99" 1100 mm 43.31" 800 mm 31.50" 360 mm 14.17"
*1 3600 mm (1800 mm) 141.73" (70.87") is assumed as maximum because the fiber cable has a length of 2 m (1 m) 6.6' (3.3').
*2 When using the F-1 at a temperature of 70°C (158°F) or more, specify the “Heat-resistant F-1. “Heat-resistant F-1” must be used in a constant temperature.
33
Reflective model Standard/Simple Mounting Type
*1 When using the FS-N Series. Standard target: White mat paper (Reflective type only.)
*2 The smallest detectable object was determined at the optimal detecting distance and sensitivity setting.
34
Reflective/Standard/Simple Mounting Type
Specifications Dimensions
ø1.77 ø0.07"
HSP : 12 0.47"
Do not bend sleeve
2 m 6.6' Free-cut (ø1.3 ø0.05" ×2)
ULTRA : 560 22.05"
FU-4FZ: -40 to +50°C (-40 to +122°F) R2
MEGA : 770 30.32" SUPER : 380 14.96" FU-4FZ
FU-4F: -40 to +70°C (-40 to +158°F) R0.08" [P.45]
FINE : 190 7.48" TURBO : 260 10.24" Approx. 8 g
ToughFlex
HSP : 80 3.15" ø0.005
0.67" 17
ø0.0002"
ULTRA : 860 33.86" Gold wire
ø3 ø0.12"
R25 MEGA : 1100 43.31" SUPER : 570 22.44" FU-4F
[P.45]
R0.98" FINE : 300 11.81" TURBO : 410 16.14" Approx. 8 g
HSP : 140 5.51"
Specifications Dimensions
ø3 ø0.12" HSP : 32 1.26"
*1 When using the FS-N Series. Standard target: White mat paper (Reflective type only.)
*2 The smallest detectable object was determined at the optimal detecting distance and sensitivity setting.
Minimum
Specifications Dimensions
Fiber unit length (Diameter) Cable
Bracket Beam
emitting
Optical
axis
Ambient temperature Appearance
(mm)
bend radius
(mm)
MEGA
Other power modes
detectable
object
Model /
Weight
Dimensions
FINE (mm)*2
direction height
*1 When using the FS-N Series. Standard target: White mat paper (Reflective type only.)
*2 The smallest detectable object was determined at the optimal detecting distance and sensitivity setting.
35
Reflective model Small Spot/Focused Beam Type
*1 When using the FS-N Series. Standard target: White mat paper (Reflective type only.)
Small Beam Spot/Lens + Fiber Unit
Spot Focal Lens Fiber Unit
Type diameter distance Dimensions Minimum bend radius (mm) Dimensions
(mm) (mm) Appearance (mm) Weight Model Model
Appearance
Approx. ø0.1 Ambient temperature: R10 R0.39"
-30 to +70°C (-22 to +158°F)
FU-24X
ø0.004"
Approx. ø0.2 R25 R0.98"
FU-21X
ø0.008"
R2 R0.08"
ToughFlex FU-35FZ
Tip: ø4.3 ø0.17" R10 R0.39"
7±2
F-2HA [P.50] Stainless Steel FU-35FG
0.28"±0.08"
Approx. ø0.4 15.6 0.61" R25 R0.98"
FU-35FA
ø0.016"
Approx. 1 g
R2 R0.08"
ToughFlex FU-35TZ
R10 R0.39"
Stainless Steel FU-35TG
R10 R0.39"
Small spot Stainless Steel FU-35FG [P.51]
*1 When using the FS-N Series. Standard target: White mat paper (Reflective type only).
Use of a lens reduces *2 The smallest detectable object was determined at the optimal detecting distance and sensitivity setting.
beam width and helps
avoid deflection.
Specifications Dimensions
(mm) (mm) FINE
direction (mm)*2
Specifications Dimensions
Since the effects (ø1.0 ø0.04" ×2) ULTRA : 0 to 4 0" to 0.16"
ø0.08
of the background -40 to +70°C MEGA : 0 to 4 0" to 0.16" SUPER : 0 to 4 0" to 0.16" FU-38V
− ø0.003"
are minimized, (-40 to +158°F) FINE : 0 to 4 0" to 0.16" TURBO : 0 to 4 0" to 0.16" Approx. 5 g
Thickness 4.3 0.17" 19 0.75"
Copper wire
HSP : 2±1.4 0.08" ± 0.06"
stable detection is
possible in complex 2 m 6.6' Free-cut
14 0.55"
Flat (ø2.2 ø0.09" ×2) ULTRA : 8 to 36 0.32" to 1.42"
environments. The -40 to +60°C R25 MEGA : 8 to 38 0.32" to 1.50" SUPER : 8 to 35 0.32" to 1.38" FU-38L
FU-38 is a small spot (-40 to +140°F)
− − [P.45]
R0.98" FINE : 8 to 32 0.32" to 1.26" TURBO : 8 to 34 0.32" to 1.34" Approx. 20 g
Thickness 5.2 0.20" 20 0.79"
type, which is great for HSP : 10 to 26 0.39" to 1.02"
small object detection. 2 m 6.6' Free-cut
(ø2.2 ø0.09" ×2) ULTRA : 0 to 25 0" to 0.98"
20.5 0.81"
-40 to +70°C R5 MEGA : 0 to 25 0" to 0.98" SUPER : 0 to 25 0" to 0.98" FU-38S
− −
(-40 to +158°F) R0.20" FINE : 0 to 25 0" to 0.98" TURBO : 0 to 25 0" to 0.98" Approx. 20 g
Thickness 3.6 HSP : −
29 1.14"
0.14"
[P.45]
2 m 6.6' Free-cut
(ø1.0 ø0.04" ×2) 22 0.87" ULTRA : 0 to 14 0" to 0.55"
-40 to +70°C R25 MEGA : 0 to 14 0" to 0.55" SUPER : 0 to 14 0" to 0.55" FU-38R
− −
(-40 to +158°F) R0.98" FINE : 0 to 14 0" to 0.55" TURBO : 0 to 14 0" to 0.55" Approx. 20 g
Thickness 3.8 HSP : 0 to 12 0" to 0.47"
0.15" 29 1.14"
*1 When using the FS-N Series. Standard target: White mat paper (Reflective type only).
*2 The smallest detectable object was determined at the optimal detecting distance and sensitivity setting.
Specifications Dimensions
Reflective model Space-Saving Type
*1 When using the FS-N Series. Standard target: White mat paper (Reflective type only).
*2 The smallest detectable object was determined at the optimal detecting distance and sensitivity setting.
38
Reflective/Environment-proof
High-flex Fiber unit length (Diameter) Cable bend Detecting distance (mm)*1 Minimum
detectable Model /
Size Ambient temperature radius MEGA Dimensions
Other power modes object Weight
(mm) Appearance (mm) (mm) FINE 2
(mm)*
1 m 3.3' Free-cut
ø2 (ø1.0 ø0.04" ×2) ø0.08" ø2 FU-49U
-40 to +50°C [P.46]
ø0.08" 10 0.39"
Approx. 4 g
(-40 to +122°F)
Specifications Dimensions
2 m 6.6' Free-cut High-flex
ø3
ø3 (ø1.0 ø0.04" ×2) FU-48
-40 to +70°C [P.46]
ø0.12" 15 0.59" ULTRA : 200 7.87" Approx. 7 g
(-40 to +158°F)
MEGA : 290 11.42" SUPER : 130 5.12"
2 m 6.6' Free-cut FINE : 63 2.48" TURBO : 80 3.15"
M4
(ø1.0 ø0.04" ×2) HSP : 32 1.26" FU-68
M4 -40 to +70°C [P.47]
15 0.59" Approx. 8 g
(-40 to +158°F)
*1 When using the FS-N Series.Standard target: White mat paper (Reflective type only.)
*2 The smallest detectable object was determined at the optimal detecting distance and sensitivity setting.
Heat Resistant Fiber unit length (Diameter) Cable bend Detecting distance (mm)*1 Minimum
detectable Model /
Heat resistant Ambient temperature radius MEGA Dimensions
Other power modes object Weight
temperature*3 Appearance (mm) (mm) FINE 2
(mm)*
2 m 6.6' Free-cut (ø2.2 ø0.09" ×2) ULTRA : 580 22.83"
R5
100°C*4 -40 to +100°C M6 MEGA : 740 29.13" SUPER : 410 16.14" FU-85Z
(-40 to +212°F) R0.20" [P.48]
(212˚F) FINE : 160 6.30" TURBO : 320 12.60" Approx. 25 g
17 0.67" ToughFlex
HSP : 90 3.54"
Specifications Dimensions
-40 to +105°C M6 R25 MEGA : 1100 43.31" SUPER : 590 23.23" FU-85A
(-40 to +221°F) [P.48]
(221˚F) R0.98" FINE : 230 9.06" TURBO : 410 16.14" Approx. 21 g
Suited for use at 17 0.67" HSP : 140 5.51"
high object detection 2 m 6.6' Free-cut (ø2.2 ø0.09" ×2) ULTRA : 560 22.05"
temperatures of up to 150°C*5 -40 to +150°C M6 R20 MEGA : 720 28.35" SUPER : 410 16.14" FU-85H
(-40 to +302°F) [P.48]
(302˚F) R0.79" FINE : 160 6.30" TURBO : 320 12.60" Approx. 35 g
350°C (662˚F). 17 0.67" HSP : 90 3.54"
Specifications Dimensions
1 m 3.3' cut not allowed M4
-40 to +300°C ø0.10" R25 FU-83C
(-40 to +572°F) ø2.6 [P.48]
10 0.39" R0.98" Approx. 23 g
17 0.67"
*1 When using the FS-N Series. Standard target: White mat paper (Reflective type only). (FU-38LK shows values for t=0.7 mm 0.03" glass substrate (horizontal
direction).)
*2 The smallest detectable object was determined at the optimal detecting distance and sensitivity setting.
*3 Use the fiberoptic sensor under dry conditions. Allow some margin for the temperature upper limit when selecting a heat-resistant fiber unit.
*4 The recommended maximum ambient temperature during operation is 90°C (194°F) when constantly using a fiber unit in a high-temperature environment.
*5 The recommended maximum ambient temperature during operation is 130°C (266°F) when constantly using a fiber unit in a high-temperature environment.
*6 The recommended maximum ambient temperature during operation is 150°C (302°F) when constantly using a fiber unit in a high-temperature environment.
39
Reflective model Dedicated application type
Benefits!
The optics of the FU-15 suppress the effects of
refraction and deflection for stable detection of
liquid-filled PET bottles and other objects. The
FU-15 has an IP67 enclosure rating.
40
Retro-reflective/Transparent Object Detection
Reflector/Reflective
R-2 (OP-95388) R-3 (OP-96436) R-5 Reflective tape (OP-96629)
Tape Specifications
(Optional Parts) Model Power mode 51.2×61 mm 35×42 mm 14×36 mm 40×30 mm
2.02" x 2.40" 1.38" x 1.65" 0.55" x 1.42" 1.57" x 1.18"
MEGA (mm) 10 to 1880 0.39" to 74.02" 10 to 1540 0.39" to 60.63" 10 to 1060 0.39" to 41.73" 10 to 960 0.39" to 37.80"
ULTRA (mm) 10 to 1500 0.39" to 59.06" 10 to 1240 0.39" to 48.82" 10 to 860 0.39" to 33.86" 10 to 760 0.39" to 29.92"
SUPER (mm) 10 to 760 0.39" to 29.92" 10 to 640 0.39" to 25.20" 10 to 440 0.39" to 17.32" 10 to 380 0.39" to 14.96"
FU-13
TURBO (mm) 10 to 450 0.39" to 17.72" 10 to 360 0.39" to 14.17" 10 to 230 0.39" to 9.06" 10 to 230 0.39" to 9.06"
FINE (mm) 10 to 250 0.39" to 9.84" 10 to 200 0.39" to 7.87" 10 to 130 0.39" to 5.12" 10 to 120 0.39" to 4.72"
HSP (mm) − − − −
MEGA (mm) 100 to 6400 3.94" to 251.97" 100 to 4400 3.94" to 173.23" 100 to 2600 3.94" to 102.36"
ULTRA (mm) 100 to 5000 3.94" to 196.85" 100 to 3600 3.94" to 141.73" 100 to 2200 3.94" to 86.61"
SUPER (mm) 100 to 2500 3.94" to 98.43" 100 to 2000 3.94" to 78.74" 100 to 1500 3.94" to 59.06"
FU-15*1 −
TURBO (mm) 100 to 1690 3.94" to 66.54" 100 to 1350 3.94" to 53.15" 100 to 1200 3.94" to 47.24"
FINE (mm) 100 to 1260 3.94" to 49.61" 100 to 1000 3.94" to 39.37" 100 to 1000 3.94" to 39.37"
HSP (mm) 100 to 1000 3.94" to 39.37" 100 to 860 3.94" to 33.86" 100 to 860 3.94" to 33.86"
Specifications Dimensions
Vacuum environment type (Thrubeam)
1
Cable Detecting distance (mm)* Minimum
Fiber unit length (Diameter)
bend Detectable Model /
Ambient temperature Appearance MEGA Other power Dimensions
Detecting Heat resistant radius object Weight
Type (mm) FINE modes
method temperature (mm) (mm)*2
1 m 0.04" cut not allowed
-40 to +350°C 3 0.12"
350°C (-40 to + 662°F) 0.47" FU-V84
12 [P.50]
662°F 25 0.98"
Approx. 55 g
M4×P0.7 SUS304 720
Vacuum side 28.35"
Previously requested 1 m 0.04" cut not allowed 21.1 0.83"
-40 to +350°C MEGA : 1300 ULTRA : 500 ø0.005
vacuum type is added Thrubeam 350°C (-40 to + 662°F) 3 0.12" R25 51.18" SUPER : 19.69" FU-V84L
to the lineup. type 12 0.47" FINE : 270
ø0.0002" [P.50]
662°F R0.98" TURBO : 360 Approx. 60 g
M4×P0.7 10.63" HSP : 14.17" Opaque
37 max. 1.46" SUS304
135
2 m 0.08" Free-cut (ø2.2 ø0.09")
5.32"
-40 to +70°C
Atmosphere 70°C (-40 to + 158°C) FU-V7FN
Specifications Dimensions
side
[P.50]
158°F Across-flats:
Approx. 30 g
8 0.32"
10 0.39"
*1 Common for APC ON/OFF when the FS-N Series is used.
*2 The smallest detectable object was determined at the optimal detecting distance and sensitivity setting.
Ambient temperature
Detecting Heat resistant Material Accessory Model / Weight Dimensions
Appearance (mm)
method temperature
Optical -10 to +200°C
integrator (14 to +392°F) Unit housing: SUS304 ·M5 nut, spring washer, washer:
200°C FU-VJ1
thrubeam 1 Fiber: Multicomponent 2 each: SUS304 [P.50]
392°F Approx. 25 g
set connection glass ·2 O-rings: Fluoro-rubber
45 1.77"
type
Specifications Dimensions
Lens
Tip: ø4 ø0.16" 7.7 0.3"
Ambient temperature
Detecting Heat resistant Features Material/Accessory Model / Weight Dimensions
Appearance (mm)
method temperature
-10 to +200°C
·2 sets of optical integrators are
(14 to +392°F)
2 channel connectable. [Material] SUS304
200°C
·External diameter ø70 ø2.76 and O-ring FU-VJ2
chamber
392°F
[Accessory] 1×O-ring [P.50]
Approx. 280 g
flange ø70 ø2.76" ø40 ø1.57". Material: Fluoro-rubber
Refer to the dimensions for the appearance.
■ How to mount the optical Vacuum chamber wall Allowable mounting 2 to 12 mm (0.08" to 0.47"): when the lock nut and spring washer are used
plate thickness 2 to 16 mm (0.08" to 0.63"): when the lock nut and spring washer are not used
integrator Vacuum side Atmosphere side
The optical integrator seals and isolates the vacuum
and atmosphere sides while still transmitting light Screw Optical Atmosphere side fiber (FU-V7FN)
Vacuum side fiber
from the vacuum fiber to the atmosphere fiber. All integrator
optical integrators have been leak tested. (Leak
amount: 1×10 -10Pa·m3/sec max, at helium leak test)
Spring washer O-ring The degree of roughness for the atmosphere
Flat washer side must be 1.6Rz or more.
Mounting hole diameter: ø5.1 (0.2") + 0.1 (ø0.004"), -0
41
Amplifier
Cable type
Model
Type Appearance Control outputs External input Monitor output Dimensions
NPN output PNP output
Main unit FS-N11N FS-N11P
Standard Main unit 1 0 0
Expansion unit FS-N12N FS-N12P
Main unit FS-N13N FS-N13P [P.52]
2 output 2 1 0
Expansion unit Expansion unit FS-N14N FS-N14P
Monitor output Main unit FS-N11MN − 1 0 1
M8 connector type
Model
Type Appearance Control outputs External input Monitor output Dimensions
NPN output PNP output
Main unit FS-N11CN FS-N11CP
Standard Main unit 1 1 0
Expansion unit FS-N12CN FS-N12CP
[P.52]
Main unit
Expansion unit
− FS-N13CP
2 output 2 0 0
Expansion unit − FS-N14CP
Type Appearance Model Control outputs External input Monitor output Dimensions
Expansion unit
(No output line)
FS-N10 None*1 0 0 [P.53]
Specifications
Monitor
Type Standard 1 output High functionality 2 output Zero line
output
Cable/M8 connector Cable M8 connector *1 Cable M8 connector *1 Cable −
Expansion
Expansion Expansion Expansion Expansion unit
Main/Expansion unit Main unit Main unit Main unit Main unit Main unit
unit unit unit unit (No output
wire)
NPN FS-N11N FS-N12N FS-N11CN FS-N12CN FS-N13N FS-N14N − − FS-N11MN
Model
FS-N10
PNP FS-N11P FS-N12P FS-N11CP FS-N12CP FS-N13P FS-N14P FS-N13CP FS-N14CP −
Control outputs 1 output 1 output 1 output 1 output 2 output 2 output 2 output 2 output 1 output None*2
I/O
NPN output
(with expansion) 20 mA max for one output, residual voltage 1 V max.
PNP open collector 24 V, (without expansion) for one output: 100 mA max., two output total: 100 mA max.,
PNP output
(with expansion) 20 mA max for one output, residual voltage 1 V max.
Monitor output*3 1 to 5 V voltage output; load resistance 10 kΩ or more; repeat precision ±0.5% of F.S.; response time: 1 ms (HIGH SPEED, FINE, TURBO)*4
External input Input time 2 ms (ON)/20 ms (OFF) or more*5
Multiple connections to
Up to 16 units can be connected in total (two-output type is treated as two units)
expansion units
Protection circuit Reverse polarity protection, Over-current protection, Surge absorber
Number of interference
0 for HIGH SPEED; 4 for FINE; 8 for TURBO/SUPER/ULTRA/MEGA (When set to DOUBLE, the number of interference-prevention units will be doubled.)
prevention units
Power voltage 12 to 24 VDC ±10% ripple (P-P) 10% or less
Normal: 900 mW or less (36 mA max. at 24 V, 48 mA max. at 12 V)*6
NPN Eco on mode: 800 mW or less (32 mA max. at 24 V, 39 mA max. at 12 V)*6
Eco Full mode: 470 mW or less (19 mA max. at 24 V, 23 mA max. at 12 V)
Rating
Ambient
resistance
42
I/O Circuit Diagram
Cable type
Load
Load
Overcurrent protection
Overcurrent protection
PLC, etc.
Short-circuit current
Sensor main circuit
Black 2 mA or less
circuit
Black
(control output 1) (control output 1)
White*2
White*2 (control output 2)
(control output 2)
3.3 VDC
Load
Load
PLC, etc. Short-circuit current
Pink*2 1 mA or less Pink*2
0V 0V
Blue* 1
Blue*1
Specifications Dimensions
Monitor output type
FS-N11MN
Brown
12-24 VDC
Sensor main circuit
Protection
Orange
circuit
Device with a 10 kΩ or
Monitor output (1 to 5 V) higher input impedance
protection circuit
Overcurrent
Black
Load
(Control output )
Blue
0V
Specifications Dimensions
M8 connector type
Load
PLC, etc.
(Short-circuit current
Sensor main circuit
circuit
Sensor main circuit
circuit
2 mA or less)
(Control output 1)
(Control output )
*2
(control output 2)
3.3 VDC
Load
Load
*3
Short-circuit current
PLC, etc. 1 mA or less
0V 0V
*1 *1
Specifications Dimensions
*1 FS-N11CN only *1 FS-N11CP/N13CP only
*2 FS-N13CP/N14CP only
*3 FS-N11CP/N12CP only
43
Sensor head Dimensions
FU-12 Free-cut Set of 2 FU-13 Free-cut Reflective tape (Included with FU-13)
0.12"0.25"
0.17" 4.2 3 6.4 (Center of optical axis) 0.12" 3 OP-96629
40 1.57"
ø0.13", ø0.26" 0.17" 4.2
10 2-ø3.2, ø6.6 countersink ø2.2 ø0.09" Across-flats: 10 0.39",
0.39" t=2 0.08"
(Mounting hole) ø1.6 ø0.06"×2 ø1.0 ø0.04"×2
16 M6, P=0.75 30
0.79" 200.63" 10 0.39"
2 openings (Adaptor B)
1.18" Material: PC, Acryl
0.15" 3.9 12 t=0.7 0.03"
0.47"
20
0.79"
23.3 2000 78.74" 17 2000 78.74"
0.92" 0.67"
FU-15 Free-cut
Center of ø0.13" R-2 Reflector Mounting bracket Plate nut
optical axis 2-ø3.2 2-C1.5 ø1.0 0.04×2 (Included with FU-15) (Included with FU-15) (Included with FU-15)
(Mounting hole) 0.30" (Adaptor B) 47 1.85" 30.5 1.20"
7.5 (0.85") 14
0.32" (21.5) 0.79" 20
25.6 0.32" 0.55"
9 20.8 14 47
61 1.85"
51.2 1.01" 8 8 2 0.08"
0.35" 0.16" 4 0.82"0.55" 2.40"
2.02" 2-M3, P=0.5 6
30.4
1.20" 0.24"
0.13"
3.4 ø0.18" 11 0.43" 4.2 6.8 Material: SUS304
7.8 0.91" 7.7 2-ø4.5 4.2 t = 1.5 0.06"
0.17" 0.27"
0.31" 23.2 0.30" 0.17" 21.5 0.85"
30 0.14" 3.5
12.6 26.9 1.06" 1.18" 0.22" 5.5 0.15" 14 0.55" 0.12"
2000
0.50" 39 1.54"
78.74"
40
1.57"
8 3.8 3.5 0.14" 3
3 0.12"
51.2 0.32"
2.02" 14
5.8 0.23" 3.5
Material: Acrylic, ABS 0.55" 0.14" Material: SUS304
8 37.5
0.32" 1.48" t = 1.2 0.05"
*Supplied screws (Included with FU-15)
M3×18 (2 pcs.)
15.5
0.61"
FU-16/16Z/18 Free-cut Set of 2 Mounting bracket FU-18M Free-cut Set of 2 Mounting bracket
(Included with FU-16/16Z/18) (2 pcs.) (Included with FU-18M) (2 pcs.)
ø2.5 ø0.1" (Beam dia.) ø1 ø0.04" (Beam dia.)
t=1.0 0.04"
0.14" 0.12" ø1.0 ø0.04" 0.22"
5.3 0.21" SUS303 15 SUS303
3.6 3 ø4 0.16" (Adaptor B) 2- R1.6 5.7 0.08" ø1.0 ø0.04" 0.59" 0.39" 9.9
R 0.06"
SUS303 10 0.39"
2 0.8 (Adaptor B)
0.1" 2.5 2.1 0.08"
0.03"
0.07" 1.8 9.1 0.01"0.06"
17 13 2000 78.74" 18 3.2 4.5 0.18" 0.36" 0.2 1.5
0.67" 0.51" 0.71" 0.13" 20 2000 78.74"
t = 0.5 0.02", SUS304 1.5 0.79"
0.06" 0.2" 5.1 2
0.08"
FU-23X FU-24X
ø0.007"
Across-flats: 5.4 0.21", t=2 0.08" FU-25 Free-cut
Across-flats: 10 0.39", t=2 0.08"
ø0.06"
ø1 ø0.04" ø3 ø0.12"
ø0.175×1 M3, P=0.5 ø1.5 ø0.09"
core fiber
ø2.2 ø0.09" core fiber Nickel-plated brass
ø1 ø0.04" M6, P=0.75 ø2.2×2
SUS304 core fiber Nickel-plated brass
ø0.01" ø0.16"
ø0.25×16
17 500 19.69"
15 ø0.01"
ø4
core fiber
0.67" ø0.007" 500 19.69" ø0.25 ×16 0.12" 3 14 2000 78.74"
ø0.175×8 0.59" core fiber 0.55"
core fiber
44
CAD Data Download: www.keyence.com/CADG
Unit : mm inch
FU-34 Free-cut Set of 2 FU-35FA Free-cut FU-35FG Free-cut
Across-flats: 5.4 0.21" Across-flats: 5.4 0.21", t=2 0.08"
ø0.09" t=2 0.08"
0.1" ø1.2 ø0.05" ø3 ø0.12" ø2.2
ø1.3 ø0.05"×2 M3, P=0.5 ø1.3 ø0.05"×2
0.08" 2 2.5 SUS304 SUS304
ø0.5 ø0.02" M3, P=0.5 (Adaptor A) ø0.5 ø0.02"
SUS303 ø3.5 ø0.14" (Adaptor A)
core fiber SUS303
core fiber
SUS304
0.02" 0.4 10 Bendable area ø0.01"
0.39" 0.2" 5 ø0.265×8 ø3 ø0.12" ø0.01" ø4.5 ø0.18" 5 ø4.5 0.18"
65 15 1920 75.59"
core fiber 18 5 1000 39.37"
ø0.265×8
0.2" SUS303
2.56" 0.59" 0.71"0.2"
core fiber
13 300
0.51" 5 11.81"
1000 39.37"
0.2"
FU-35FZ Free-cut FU-35TG FU-35TZ Free-cut
Across-flats: 5.4 0.21"
t=2 0.08"
M6, P=0.75 Effective screw length: 12 Nickel-plated brass
M3, P=0.5 Effective screw length: 12 0.47"
ø1.3 ø0.05"×2 M3, P=0.5 Effective screw length: 3.5 0.14" Nickel-plated brass
ø0.5 ø0.02" M3, P=0.5 (Adaptor A) ø0.5 ø0.02" core fiber ø3.5 ø0.14" SUS304
ø1.3 ø0.05"×2
ø0.5 ø0.02" core fiber
core fiber SUS303 0.45" 8.1
(Adaptor A)
Specifications Dimensions
3 0.12"
ø0.13", ø0.24" ø2.2 ø0.09"×2
2-ø3.4, ø6 countersink 0.47"
(Mounting hole) ø1.0 ø0.04"×2 (Adaptor B)
5 15 12 10
ø2.2 ø0.09"×2 1.17"
1.1 33.9
0.39" (20)* 59.06" 18.9" 0.79"
0.2" 0.59" 0.47" 1000 39.37"
0.04" * Do not bend this 1.33" (1.04")
(0.79")* part. 1500 480 20 (26.4)
(-40 to +250°C)* (-40 to +200°C)* (-40 to +70°C)* (-40 to +55°C)*
(-40 to +482°F)* (-40 to +392°F)* (-40 to +158°F)* (-40 to +131°F)*
Specifications Dimensions
2000 78.74"
* Maximum temperature resistance for each part is shown in ( ).
FU-38R Free-cut FU-38S Free-cut FU-38V Free-cut
Specifications Dimensions
2000 78.74"
21 2000 78.74"
0.67" 5.2 0.83"
0.2" SUS304
45
Sensor head Dimensions
FU-5F/5FZ Free-cut Set of 2 FU-50 Free-cut Set of 2 Mounting bracket FU-51TZ Free-cut Set of 2
ø3 ø0.12" ø2.2 ø0.09" 0.16" (Included with FU-50) ø0.08", ø0.14" 0.06"
ø0.04" (ø0.04")
ø1 (ø1.13) SUS304 4 SUS303 ø1.0 ø0.04" 2-ø2.1, ø3.6 spot facing d=1.4
core fiber 0.14" (Adaptor B) 0.22" 5.7 0.12" 0.1" M2, P=0.4×ℓ6 0.24" screw/nut provided
3.6
R0.06"
2-R1.6
5.3 0.21" 3 2.5
2000 78.74" ø0.11" ø1.0 ø0.04" (Adaptor B)
15 0.59" ø2.8 12 2000 78.74" 0.07"
1.8
10 0.39" 10 0.2" 5
(14)(0.55") lens
0.47" 0.39"
* ( ) shows FU-5FZ. 18 3.2 1000 39.37"
0.71" 0.13" 4.5 10 0.39"
0.18" ø0.5 ø0.02" core fiber Housing: Aluminum
t=0.5 0.02", SUS304
6 1000 39.37"
10 1000 39.37"
6 500 19.69" 0.24"(10) *(0.39") * * Do not bend this part. 0.39"
0.24"
46
CAD Data Download: www.keyence.com/CADG
Unit : mm inch
FU-59U Free-cut Set of 2 FU-6F Free-cut FU-61/61Z Free-cut
ø0.5 ø0.02" core fiber Across-flats: 10 0.39", t=2 0.08" ø0.06" Across-flats: 10 0.39", t=2 0.08"
ø1.5×2
ø1 ø0.04"×2 M6, P=0.75 ø2.2×2 ø0.09"
core fiber M6, P=0.75 ø0.09"
ø2.2×2
ø1.5 ø0.06" ø1.0 ø0.04" core fiber Nickel-plated brass SUS303
SUS303 ø0.16" ø0.16"
ø4 ø4
0.39" 10 1000 39.37"
(5) *(0.2") *
* Do not bend this part. 0.12" 3 14 2000 78.74" 0.12" 3 14 2000 78.74"
0.55" 0.55"
0.28"0.08"
FU-63 Free-cut
Across-flats: 7, t=2 FU-63T Free-cut FU-63Z Free-cut
0.28"0.08"
0.39" Bendable area Thickness 3 0.39" Bendable area Across-flats: 7, t=2
ø0.02" 10
0.20"
5 M4, P=0.7 ø0.02" ø0.05"ø0.07" Nickel-plated brass ø0.03" 10
0.20"
5
ø0.5×2 ø1.65 ø0.07" Nickel-plated brass ø0.5×2 ø1.3 ø1.65 0.12" ø0.65×2 ø2.0 ø0.08" M4, P=0.7
core fiber
3 ø1.3 ø0.05"×2 (Adaptor A)
core fiber SUS304 SUS304 core fiber SUS304 SUS303
0.39" 10
ø1.3 ø0.05" ø1.3 ø0.05"×2 2-ø3.4 ø0.13" ø1.65 ø0.07" ø1.3 ø0.05"×2
0.12" 3 0.37" (Adaptor A)
(Adaptor A) Bendable area
0.39" 10 9.5
0.08" 2 65 15 2000
0.08" 2 65 0.20" 5
15 2000 0.08" 2 65 15 2000
2.56" 0.59" 78.74"
2.56" 0.59" 78.74" 2.56" 0.59" 78.74"
Specifications Dimensions
ø0.10" ø0.10"
* ø2.6 0.32" 2000 78.74"
15 15 500 19.69"
3 12 0.47"
2000 78.74"
3 0.12"
0.59"* 0.59" * Do not bend this part. 0.12" * ( ) shows FU-66Z. 7 0.28"
3.5 (M4 nut [Across-flats: 7 0.28",
0.14" 7 t=2 0.08"] and washer included)
0.28"
FU-67/67V Free-cut FU-67G FU-67TG
Across-flats: 10 0.39", t=2 0.08" ø0.04" Across-flats: 10 0.39", t=2 0.08"
ø0.04" M6, P=0.75 Effective screw length: 7.5 0.3" Nickel-plated brass
ø1.13×2 M6, P=0.75 ø0.09"
ø2.2×2
ø1.13×2
M6, P=0.75 ø3.8 ø0.15"
ø4 ø0.16"
core fiber SUS304 ø1.13 ø0.04"×2 core fiber ø3.8 ø0.15" SUS304
core fiber Nickel-plated brass Nickel-plated brass
ø0.16"
ø4
11.5
ø0.16"
ø4
0.45" 1000 39.37"
2000 78.74" 0.08" 2 15 3 0.12"
3 13 0.51" 0.59" 1000 39.37"
8 0.31" (M6 nut [Across-flats: 10 0.39",
0.12" 0.24" 6 t=2 0.08"] and washer included)
10
0.39"
FU-67TZ Free-cut FU-68 Free-cut FU-69U Free-cut
Specifications Dimensions
M6, P=0.75 Effective screw length: 7.5 0.3" Across-flats: 7 0.28", t=2 0.08" ø0.02" Across-flats: 5.4 0.21", t=2 0.08"
Nickel-plated brass ø0.01" ø0.5×2
ø4 ø0.16" ø1.13 ø0.04"×2 core fiber
ø0.09" (ø0.265×4)×2 M4, P=0.7 ø1.0 ø0.04"×2 core fiber
M3, P=0.5
ø2.2×2 SUS303 ø1.0 ø0.04"×2
11.5 core fiber SUS304 (Adaptor B)
ø0.12"
0.45" 2000 78.74" ø3
3 0.12" 2000 78.74" 0.39" 10
8 0.31" 3 12 0.47" 13 1000 39.37"
0.19" 4.8 (M6 nut [Across-flats: 10 0.39", 0.12" 0.51" (5) *(0.2) * * Do not bend this part.
10 t=2 0.08"] and washer included)
0.39"
FU-69X FU-7F Free-cut Set of 2 FU-70U Free-cut Set of 2
Across-flats: 7 0.28", t=2 0.08"
Across-flats: 7 0.28", t=2 0.08"
ø2.3 ø0.09"
ø0.01"
Across-flats: 5.4 0.21", t=2 0.08" M2.6 P=0.45
M4, P=0.7 lens
M4, P=0.7
ø0.265×4 M3, P=0.5 ø1 ø0.04" ø1 ø0.04" ø0.09" Nickel-plated brass ø1.0 ø0.04"
Nickel-plated brass ø2.2
core fiber Nickel-plated brass core fiber
2.2
10 1000 39.37" 2000 78.74" 0.09" 10.4 ø0.41"
0.39" 3 12 0.47" 13 1000 39.37"
0.12" 0.51" (5) *(0.2) * * Do not bend this part.
Specifications Dimensions
FU-71/71Z Free-cut Set of 2 FU-73 Free-cut Set of 2 FU-75F Free-cut Set of 2
0.28"0.08"
ø0.82 ø0.03" SUS304
M4 P=0.7
Across-flats: 10 0.39", t=2 0.08"
ø0.05" ø0.07" Across-flats: 7, t=2 Across-flats: 5.4 0.21", t=2 0.08"
ø1.5 ø0.06"
M6, P=0.75 ø1 ø0.04" ø1.3 ø1.65 M4, P=0.7 ø0.02"
ø0.5 M3, P=0.5 ø1.0 ø0.04"
SUS303 ø2.2 ø0.09" core fiber SUS304 Nickel-plated brass Nickel-plated brass (Adaptor B)
core fiber core fiber
ø2.2 ø0.09" *
2000 78.74" 0.39" Bendable area 1000 39.37"
4 12 0.47" 10 5 15 15 0.59" * Do not bend this part.
0.16" 0.08" 2 65 15 0.20" 2000 0.59"
2.56" 0.59" 78.74"
1.77" 0.59"
fiber 0.12" 22 1000 39.37"
0.87"
47
Sensor head Dimensions
FU-85A Free-cut Across-flats: 10 0.39", t=2 0.08" FU-85H Free-cut Across-flats: 10 0.39", t=2 0.08" FU-85Z Free-cut Across-flats: 10 0.39", t=2 0.08"
ø0.04"
M6, P=0.75 ø2.2×2
ø0.09" ø0.06"
ø0.2"
M6, P=0.75 ø0.09" ø0.04"
ø1×2 M6, P=0.75 ø0.09"
ø1×2 2-ø1.5 ø2.2×2 ø2.2×2
SUS303 core fiber
core fiber SUS303 core fiber ø5.1 SUS303
ø0.16" ø0.16" ø4
ø4
0.12" 3 14
13
2000 78.74" 0.04" 1 0.51"
ø6 ø0.24" 0.12" 3 14
2000 78.74"
0.55" 17 2000 78.74"
0.67" 0.55"
FU-86A Free-cut Set of 2 FU-86H Free-cut Set of 2 FU-86Z Free-cut Set of 2
Across-flats: 7 0.28", t=2 0.08"
Across-flats: 7 0.28", t=2 0.08" M2.6, P=0.45 Across-flats: 7 0.28", t=2 0.08"
M2.6, P=0.45 ø0.06" M4, P=0.7
M4, P=0.7 ø0.09"
ø1.5
ø0.11" ø0.04" M4, P=0.7 ø2.2 ø0.09"
ø0.04" ø2.2 ø2.9 Nickel-plated brass ø1
ø1 SUS303 core fiber SUS303
core fiber core fiber
ø2.2 ø0.09"
0.12" 3 12 2000 78.74" 0.04" 1 13 ø4 ø0.16"
0.12" 3 12 2000 78.74"
0.51"
0.47" 2000 78.74"
0.47"
17 0.67"
48
CAD Data Download: www.keyence.com/CADG
Unit : mm inch
FU-95W Free-cut FU-96 Free-cut Set of 2 FU-96T Free-cut Set of 2
25 2000 78.74"
ø0.09" (4.5) (0.18")
ø0.2" 0.56"
0.98" ø2.2×2 Center of ø5 FEP-tube 14.3
7.5
2000
0.12" 78.74"
0.21" optical axis ø0.16" ø0.09" 0.3" (6.4) (0.25")
17 5.3 ø4 FEP-tube ø2.2
3 2-ø3.2 ø0.13" (mounting hole)
ø2.8 lens
0.67" ø0.11” 0.12” 3 (7.3) (0.29") ø2.2 ø0.09"
0.08" 2 8-R1
(23) (0.91")
13
0.07" 1.85 5 11.3 0.51"
0.2" 0.44" 5 0.2" (25)*
0.01" Transmitter 16-ø0.265 ø0.01" R4 * Do not bend
12.5 2-ø2.2 Metal casing is (0.98")*
0.49" ø0.09" 0.3 0.2" Optical axis this part.
inserted.
0.2" 5 2000 100 5
9 Receiver 16-ø0.265 ø0.01” 78.74" 3.94"
0.6
0.35"
0.02" 0.28" 7
Housing: PBT
Specifications Dimensions
7.6 7.6
0.3" 0.3"
FU-98 Free-cut Set of 2 FU-98 (when OP-87095 is attached) FU-A05 Free-cut Set of 2
PFA housing 0.49" 0.35"
0.3" 0.18" 12.5 9
(R0 .1)
2 0.08" )
(R9
7.7 4.5
ø6.5 (ø6.2) (ø0.24") 0.13" 1°
.36
ø0.26" ø0.16" 0.2" 5 0.08" 4.2 0.17" (1 ø2.2 ø0.09" Cable
3.25 2 0.17" 4.2 0.25" 6.44 length: 2 m 6.6'
")
ø0.26" ø4 PTFE tube
6.5 ø6.5 Optic fiber ø2.2
0.26" ø0.09" (20.4)
0.39" 10 0.59" 15
(0.8")
0.16”4
ø3.2 ø0.13" Mounting hole
6.5 13 8 2
0.51" 0.32" 0.08"
18 Mounting bracket: SUS316 Width 3.2 0.13"
Mounting hole 6.44
0.43"
0.71" t=1.2 0.05" 0.25" ø6 ø0.24", Spot-facing,
0.26" 36.5 18
Width 6 0.24",
Spot-facing,
11 d=1 0.04" (Both sides)*
(1.97”)
1.44" (50)
0.71" d=1 0.04" (Both sides)* 15 *M3×ℓ8 0.32" screws included
2000 78.74" (20.4) 0.59"
0.39" 10 Detection area details
(0.8")
Detection Area 16-ø0.265 ø0.01"
4.2 0.08" 2 0.08"
Specifications Dimensions
4.2 0.17"
0.13" 3.25
0.3" 7.7
0.2" 5 0.17" 2 0.16" 4
4.5 Mounting bracket: SUS316
0.18" 12.5 9 t=1.2 0.05" 0.04" 1 5.25 0.21" 0.35 0.01"
0.49" 0.35"
(R0 .5)
(R1
(R0 .5)
(R1
(R1
.57
) ) )
2°
.57
4
2° 2°
.57
4
(2 (2
")
(2
")
")
ø0.09" ø0.09"
ø2.2 ø0.09" ø2.2×2 ø2.2×2
Cable length: 2 m Cable length: 2 m
0.79" 20 10.25 0.4" 6.6' 0.79" 20 10.25 0.4" Cable length: 2 m 0.79" 20 10.25 0.4" 6.6'
6.6'
0.16" 4 0.16" 4 0.16" 4
ø3.2 ø0.13" Mounting hole Width 3.2 0.13" Width 3.2 0.13" ø3.2 ø0.13" Mounting hole
ø3.2 ø0.13" Mounting hole
Width 3.2 0.13" Mounting hole Mounting hole 10.25 ø6 ø0.24", Spot-facing,
Mounting hole 10.25 ø6 ø0.24", Spot-facing, 10.25 ø6 ø0.24", Spot-facing, 0.63"
0.63" Width 6 0.24", 0.63" Width 6 0.24", 0.4" d=1 0.04" (Both sides)*
Width 6 0.24", 0.4" d=1 0.04" (Both sides)* 0.4" d=1 0.04" (Both sides)* Spot-facing, 16
Spot-facing, 16 Spot-facing, 16 d=1 0.04" (Both sides)*
*M3×ℓ8 0.32" screws included
d=1 0.04" (Both sides)* 20 *M3×ℓ8 0.32" screws included d=1 0.04" (Both sides)* 20 *M3×ℓ8 0.31" screws included 20
Detection area details
0.79" Detection area details 0.79" Detection area details 0.79"
Detection Area Detection Area 0.02"
16-ø0.265 0.5 Transmitter 16-ø0.265 Detection Area Transmitter 16-ø0.265
0.5 0.02" ø0.01"
ø0.01" ø0.008"
0.16" 4 Receiver 16-ø0.265
0.16" 4
Specifications Dimensions
ø0.01"
0.16" 4
Receiver 16-ø0.265
0.04" 1 10.5 0.7 0.03" 0.04" 1 5.25 0.21" ø0.008"
0.41" 0.04" 1 10.85 0.35 0.01"
0.01" 0.35 0.43"
49
Sensor Head/Lens Dimensions
ø0.11"
17 0.67"
ø4 ø0.16"
ø4.1 ø0.16"
ø0.16"
ø0.14"
2-ø3.4 ø0.13" 10 0.39"
ø0.14"
8
ø4.1
ø2.9
(SUS304)
ø3.5
0.33" ø0.09" ø1.2 ø0.05"
ø3.5
0.16" 4 8.5 (mounting hole) 0.08" (Beam dia.)
4 0.16" ø2.2 0.11"
2.8
0.5" 12.8 8
ø0.09" 0.12" 3 12 0.04" 1
0.47"
0.32" 2000 78.74" 10
Beam dia.:
Mounting hexagon cap nut
across-flats: 8 0.32" (SUS303) 25 1000 39.37" 20
A A 0.39"
0.11" ø1.0 ø0.04" 0.98" 0.79"
B B ø2.2 2.8 0.39"
ø0.09" 10 SUS303
0.32"
0.5" 12.8 8
4 0.16"
0.16" 4 8.5
0.33" 2-ø3.4 ø0.13"
12.8 17 0.67" (mounting hole)
0.5" 0.39" 10
0.08" 2 ø1.13 ø0.04" core fiber
VIEW B-B
4-ø12.5 ø0.49"
ø4.1
ø0.11"
ø0.14"
Casing tube 8 0.32" 1 4 - ø5.1 ø0.2" through holes concave 0.1 0.004"
ø2.9
(SUS304)
ø3.5
(SUS304)
0.04" P.C.D 20
ø2
(SUS304) M5×P0.8
MAX37 1.46"
(SUS304)
0.12" (34) (1.34")
R10
R0.3 Spring washer ø7.6 ø0.3", t = 1 0.04" (SUS304) Mounting hole M5×P0.8(SUS304)
3 12 0.47"
9"
ø5.1 ø0.2" -0
Plain washer ø8 ø0.32", t = 0.8 0.03" (SUS304) hexagon cap nut 2.5
across-flats: 8
Vacuum 0.1" Atmosphere
ø0 12
side
.4
0.32"(SUS304)
ø
F-1 2 per set F-2 2 per set F-4 2 per set F-5 2 per set F-2HA
Housing: Nickel-plated brass Housing: Nickel-plated brass Housing: Aluminum Housing: Aluminum Housing: Aluminum
Lens: Acrylic Lens: Glass Lens: Glass Lens: Glass Lens: Plastic
ø3.7 ø0.15" (0.2) (0.01")
ø2.8 ø0.11" Lens diameter 2-ø3.1 ø0.12"
ø4.3 ø5 ø0.2"
ø4 ø0.16" ø4 ø0.16" ø0.17" ø4.3 ø0.17"
0.66" 16.7
6 7.9 5.5 0.22" 5 0.2"
9.5
0.24" 0.31" 0.37" 15.6
9.5 0.49" 12.4 7.4 0.61"
5.6 2 0.08"
0.37" 0.29"
0.22"
9.3
0.37"
Housing: Aluminum Housing: Aluminum Housing: Aluminum Housing: Aluminum Housing: SUS304
Lens: Plastic Lens: Glass Lens: Glass Lens: Plastic Lens: BK-7
ø3.7 ø0.15" 0.3" M2.6×P0.45
2-ø3.2 0.47" 12 M8 P=1.0 7.7 ø4 ø0.16"
ø7.4 Lens diameter
ø4.3 ø5 ø0.2" ø0.29"
ø8 ø0.32" 0.22" ø0.13" A A (A-A cross section)
ø0.17" 5.5 1.02" 26
8 0.59" 15 Chamfering
5 0.2" 0.32" 10.4 0.41" (4.0) (0.16")
9.5 27 2.4 3.5 0.14"
0.37" 1.06" 0.09" ø1 ø0.04" air-bleeding hole
0.47" 12 2.2 ø10.6
5.6 0.09" ø0.42"
0.22" 8.7
0.34"
50
CAD Data Download: www.keyence.com/CADG
Unit : mm inch
With lenses
6 6 6 6 7.9 12 7.9 11
0.24" 0.24" 0.24" 0.24" 0.31" 0.47" 0.31" 0.43"
9.5 12 9.5 11 9.5 12 9.5 15
0.37" 0.47" 0.37" 0.43" 0.37" 0.47" 0.37" 0.59"
Specifications Dimensions
F-4+ F-5+ F-5+ F-5+ F-2HA+ F-2HA+
FU-77TG FU-7F/86A/86Z FU-77/77V FU-77G FU-21X/FU-24X FU-35FA
ø4.3 ø0.17"
Specifications Dimensions
15.6 13.5 6 0.24" 15.6 9.5 6 0.24"
0.61" 0.53" 0.61" 0.37"
9 5
27 15 5 27 9 5
9.5 27 9 5
0.37" 0.35" 0.2" 1.06" 0.59" 0.2" 1.06" 0.35" 0.2"
1.06" 0.35" 0.2"
Specifications Dimensions
F-4HA+ F-4HA+ F-5HA+ F-5HA+ F-5HA+ F-6HA+
FU-35TG FU-35TZ FU-35FA FU-35FG FU-35FZ FU-21X
27 1.06" 13.5 6 0.24" 27 1.06" 9.5 6 0.24"
0.53" 0.37"
0.21" 5.4 0.21" 5.4 0.21" 5.4
15 L 5 15 L 5 15 L 5
0.59" 0.2" 0.59" 0.2" 0.59" 0.2" 26 1.02" 4 0.16"
L=8.6 0.34" to 13.5 0.53" L=3.6 0.14" to 8.5 0.33" L=2.6 0.1" to 7.5 0.3" (M8 nut and washer provided)
0.08" 2 0.04" 1
26 7 5 26 12
26 5 26 5
1.02" 0.28" 0.2" 0.2" 1.02" 8 0.47" 22
1.02" 0.2" 1.02"
0.32" 0.87"
(M8 nut and washer provided) (M8 nut and washer provided) (M8 nut and washer provided) (M8 nut and washer provided)
51
Amplifier Dimensions
170°
Maximum Maximum
max. when the
when the
cover is 3.4 0.13" cover is 3.4 0.13"
opened: opened:
100 3.94" 100 3.94"
0.16"
4 0.16" 30.3
30.3 4 1.19"
1.19"
(35.3) (35.3)
(1.39") (1.39")
(13) (0.51") (13) (0.51")
170°
max.
Maximum Maximum
when the 3.4 0.13" when the 3.4 0.13"
cover is cover is
opened: opened:
100 3.94" 100 3.94"
0.16" 0.16"
4 30.3 30.3
4 1.19"
1.19"
(35.3) (35.3)
(1.39") (15.5) (1.39") (15.5)
(0.61") (0.61")
M8
6.7 M8 6.7 connector
0.26" 20.7 35.4 0.26" 20.7 35.4
0.82" connector 0.82"
1.39" 1.39"
71.8 9.5 71.8 9.5 0.37"
2.83" 0.37" 2.83"
M8 connector cable (OP-73864/73865 sold separately) M8 connector junction cable (OP-85498 sold separately)
ø3.7 ø0.15", 4-core×0.28 mm2
6.7 6.2 0.24"
0.26" ø9.5 ø0.37" ø3.7 ø0.15" 4×0.28 mm2 ø9
Cable length L(m feet) ø0.35"
ø9.5
OP-73864 2 6.6' ø0.37" ø9 M8×1
OP-73865 10 32.8' ø0.35"
(26.7)
(1.05") 26.7 26.2
L 1.05" 1.03"
2000
78.74"
52
CAD Data Download: www.keyence.com/CADG
Unit : mm inch
FS-N10 OP-87199
Zero line type, Expansion unit Conversion adaptor
9.8 9.9
0.39" 0.39"
Maximum
when the
cover is 3.4 0.13"
opened:
100 3.94"
25
0.16" 0.98"
30.3 (29.5)
4 1.19"
(35.3) (1.16")
(1.39")
20.7 35.4
0.82" 1.39"
6.7 69.8
20.7 35.4 2.75"
0.26" 0.82" 71.8 1.39"
2.83"
Specifications Dimensions
When the mounting bracket is attached (OP-73880 sold separately)
30.3 30.3
1.19" 1.19"
(38.5) (38.5)
(17.3)
(1.52") (18.8) (1.52")
(0.68") (0.74")
Specifications Dimensions
25.7 25.4 25.7 25.4
d=2.7 0.11" 1.01" 1" Spot facing: ø6.4 ø0.25", d=2.7 0.11"
1.01" 1"
15 15
0.59" 0.59"
Material: Polycarbonate Material: Polycarbonate
31 31
1.22" 1.22"
Specifications Dimensions
Common for all types End unit
(OP-26751 sold separately)
When several units are connected: No. of units L (mm inch)
1 9.8 0.39"
End unit End unit *1
2 19.6 0.77" 0.24" 6
3 29.4 1.16"
4 39.2 1.54"
5 49.0 1.93"
6 58.8 2.32" DIN-rail mounting
7 68.6 2.7"
8 78.4 3.09"
9 88.2 3.47" (22.6) 20.8
(0.89") 0.82"
10 98.0 3.86"
11 107.8 4.24"
12 117.6 4.63" 9.2 35.4
0.36" 1.39"
13 127.4 5.02"
53.8 2.12"
14 137.2 5.4" Material: Polycarbonate
6 L 6 15 147.0 5.79"
0.24" 0.24" 16 156.8 6.17"
*1 End units must be used when several units are connected. (OP-26751) 17 166.6 6.56"
53
Digital Photoelectric Sensor
FUNCTION
Extendable sensor head cable
NEO Preset
Because the sensor head cable is a simple y When jointing fiberoptic sensors…
power cable, it can be extended to the Membrane
desired length. By soldering or using a
metal connector, it can be extended to a Joining The light
intensity at the
NEO MEGA
surface
maximum of 10 m (32.81'). joining surface
is attenuated by
approximately
90%. Built-in application modes
54
Thrubeam type
Model
Type Appearance Detecting distance (mm inch)*1 Features Dimensions
(C means with connector)
Specifications Dimensions
MEGA : 750 (900) 29.53" (35.43")
ULTRA : 500 (600) 19.69" (23.62") Flat-to-flat type
PS-56 [P.59]
SUPER : 400 (450) 15.75" (17.72") 2.8 mm 0.11" thickness
TURBO : 300 (400) 11.81" (15.75")
*1 Depends on the mode, response time may be different even with the same detecting distance. Detecting distance in parentheses is a value when enabling the long distance detection
mode with a 5 m sensor head cable.
*2 5×1 mm 0.2"×0.04" slits for both transmitter/receiver.
Specifications Dimensions
Reflective model
Model
Type Appearance Detecting distance (mm inch)*1 Features Dimensions
(C means with connector)
MEGA : 75 2.95"
Specifications Dimensions
Diffuse- ULTRA : 45 1.77"
Cylindrical, embedded type PS-48 [P.58]
reflective SUPER : 30 1.18"
TURBO : 25 0.98"
*1 Depends on the mode, response time may be different even with the same detecting distance. Detecting distance in parentheses is a value when enabling the long distance detection
mode.
55
Sensor head specifications
Options
56
Amplifier
Cable type
Model Control Monitor
Type Appearance External input Dimensions
NPN output PNP output outputs output
M8 connector type
Model Control Monitor
Type Appearance External input Dimensions
NPN output PNP output outputs output
Specifications Dimensions
Type Appearance Model External input Dimensions
outputs output
Expansion
Standard PS-N10 None*1 0 0 [P.60]
unit
Specifications
Type Cable M8 connector Zero line
Main/Expansion unit Main unit Expansion unit Expansion unit Expansion unit Main unit
NPN PS-N11N PS-N12N PS-N12CN PS-N11CN
Model PS-N10
PNP PS-N11P PS-N12P PS-N12CP PS-N11CP
Control outputs 1 output 1 output None*1
I/O
External input 1 input None 1 input 1 input None
Response time 500 μs (TURBO)/1 ms (SUPER)/4 ms (ULTRA)/16 ms (MEGA)
Output selection LIGHT-ON/DARK-ON (switch-selectable)
Specifications Dimensions
Timer function Timer OFF/OFF-delay timer/ON-delay timer/One-shot timer, Timer duration selectable: 1 ms to 9999 ms, Maximum error against the setting value: ±10% max.
NPN open collector 30 V, (without expansion) 100 mA max., (with expansion) 20 mA max,
NPN output
Control residual voltage 1 V max. (when the out current is 10 mA or less)/2 V max. (when the output current is 10 to 100 mA)
outputs PNP open collector 30 V, (without expansion) 100 mA max., (with expansion) 20 mA max,
PNP output
residual voltage 1.2 V max. (when the output current is 10 mA or less)/2.2 V max. (when the output current is 10 to 100 mA)
External input Input time 2 ms (ON)/20 ms (OFF) or more*2
Multiple connections to expansion units Up to 17 main units can be connected
Protection circuit Reverse polarity protection, Over-current protection, Surge absorber
Number of interference prevention units 4 for TURBO/SUPER/ULTRA/MEGA (When set to DOUBLE, the number of interference-prevention units will be doubled)
Power voltage 24 VDC (operating voltage 10-30 VDC (with ripple)), ripple (P-P) 10% or less, Class 2 or LPS
Normal: 810 mW or less (at 30V. 28 mA max. at 24 V, 34 mA max. at 12 V)
NPN
Power Eco on mode: 700 mW or less (at 30V. 24 mA max. at 24 V, 27 mA max. at 12 V) Eco Full mode: 490 mW or less (at 30V. 17 mA max. at 24 V, 20 mA max. at 12 V)
consumption Normal: 860 mW or less (at 30V. 30 mA max. at 24 V, 35 mA max. at 12 V)
PNP −
Eco on mode (ALL): 750 mW or less (at 30V. 26 mA max. at 24 V, 28 mA max. at 12 V) Eco Full mode: 540 mW or less (at 30V. 19 mA max. at 24 V, 21 mA max. at 12 V)
Ambient temperature -20°C to +55°C (-4°F to +131°F) (No freezing)*3
Environmental Relative humidity 35 to 85% RH, (No condensation)
resistance Vibration resistance 10 to 55 Hz, double amplitude: 1.5 mm 0.06", 2 hours each in the X, Y and Z axis
Shock resistance 500 m/s2 3 times for each of X,Y and Z axis
Specifications Dimensions
Case Main unit and cover material: Polycarbonate
Material
Cable PVC
Case size H 32.6 mm 1.28"× W 9.8 mm 0.39" × L 78.7 mm 3.1"
Weight Approx. 75 g Approx. 65 g Approx. 20 g Approx. 20 g Approx. 20 g
*1 Counted as one output when added to a NU Series communication unit. *2 Input time is 25 ms (ON)/25 ms (OFF) when the external calibration time is selected.
*3 If more than one unit is used together, the ambient temperature varies with the conditions below. Mount the units on the DIN rail with mounting brackets and check that the output
current is 20 mA or less for a u n i t .
One or two more units connected: -20°C to +55°C (-4°F to +131°F); 3 to 10 more units connected: -20°C to +50°C (-4°F to +122°F); 11 to 16 more units connected: -20°C to +45°C (-4°F to +113°F).
protection circuit
protection circuit
protection circuit
Overcurrent
Overcurrent
Overcurrent
Sensor main circuit
Short-circuit Short-circuit
current 2 mA or
Black Black less
current 2 mA or
less
(Control output) (Control (Control (Control
output) output) output)
Short-circuit Short-circuit
Pink*1 PLC, etc. current 1 mA or
less Pink*1 PLC, etc. current 1 mA or
less
0V 0V 0V 0V
Blue*1 Blue*1 *1 *1
*1 PS-N11N only *1 PS-N11P only *1 PS-N11CN only *1 PS-N11CP only
57
Sensor head Dimensions
PS-05
With PS-05 slit attached Holder (accessory)
Top view
(option OP-93672) PS-05
6.5 0.26"
ø2 12
14 ø7 ø0.28"
11 8 ø0.08" 11 0.47"
8 0.55"
0.43" 0.32" 0.43" 0.32"
8
0.32"
15 ø6 ø0.24"
13
0.51" 19
8 0.59" 8
0.32"
0.75"
0.32"
M3 mounting screw
40 15
0.59"
1.57"
11 4
0.43"
14 0.16"
0.55" 6
0.24"
2-ø3.2
ø0.13"
6
(Mounting 0.24" 2 0.08"
1
ø1.7 ø0.07", 1-core shielded hole) 0.04"
ø7 3.5
0.28" Cable length: 2 m 6.6', oil-proof 0.14"
Accessory
Screw (M3×14) flat washer,
2 each (to secure head)
spring washer, nut
Screw (M3×10) spring washer 4 each (to secure holder)
PS-45 PS-46
ø0.13"
2-ø3.2 (mounting hole) 11 Mounting bracket (accessory)
0.43" for PS-45 (option OP-0162) 21 0.83" 2.5
8 2.5 7 5.7 0.1" 2.8
2.5 0.1" 0.1" 0.28" 0.22" 0.11"
0.32"
11 0.43" 3.2 0.13" 10 0.39" 14 0.55" 5.7 0.22" 5 0.2"
3.2 0.13"
2-ø2.1 ø0.08" 11 21
21 16 3.2 0.13"
2
0.08"
2-ø2.3 ø0.09" 0.43" 0.83"
0.83" 0.63" 15 *Detail of slot
mounting hole
Spot facing:
0.16" 4 0.59" ø3.8 ø0.15"
22 2-M3 1.4 0.06" (d)
1.5 0.87" 6 2
0.06" 5.5 0.22" ø0.07" 0.24" 0.08"
11 21 ø1.7×2, 1-core shielded
11
6 4.3 0.43" 0.83" 16 Cable length: 2 m, oil-proof 0.43"
0.63" 6.6'
0.24" 8.7 0.17"
ø0.07" 0.34" 9 0.35"
ø1.7×2-1-core shielded 28 1.10"
7 0.28" 5
Cable length: 2 m, oil-proof Accessory
0.2"
6.6' 9.5 0.37" t=1.0 0.04"
Accessory Screws (M2×10), 2 pieces
Screws (M3×12), 2 pieces 3 slots* t=1.0 0.04" Nut, spring washer, flat washer: 2 each
9
0.35"
58
CAD Data Download: www.keyence.com/CADG
Unit : mm inch
Specifications Dimensions
PS-56 PS-58
Receiver 15.5 Transmitter 15.5
0.61" 0.61" ø1.7 ø0.07", 1-core shielded
Cable length: 2 m 6.6', oil-proof
7.2
0.28"
2.5 0.1" 2.5 0.1" 7.2 2.8
0.28"
0.11" ø3.8
5.7 0.22" 5 0.2" 5 0.2" 5.7 0.22"
ø0.15"
20
ø2.1 ø0.08" 11 ø2.1 ø0.08" 0.79"
0.43" 21 11
2-ø2.3 ø0.09" (mounting hole) 21 0.83" 0.43" 2-ø2.3 ø0.09" (mounting hole)
Mounting bracket (accessory) for PS-58
Spot facing: ø3.8 ø0.15"
1.4 0.06" (d)
0.83" Spot facing: ø3.8 ø0.15"
1.4 0.06" (d)
(option for one side only: OP-6350)
ø3.3 ø0.13"
5 0.2" 2 2 5
0.08" 0.08" 0.2" (mounting hole)
10 10
Specifications Dimensions
0.39" 0.39"
9 0.35" 16.2
ø1.7 ø0.07", 1-core shielded ø1.7 ø0.07", 1-core shielded 0.64"
Cable length: 2 m, oil-proof Cable length: 2 m 6.6', oil-proof
6.6' 8.5 Slot*
Accessory 0.33"
4.2 0.17"
Screws (M2×10), 4 pieces
15.5
Nut, spring washer, flat washer: 4 each 0.61" 1 0.04"
Specifications Dimensions
(PFA-sheathed) 4.5
ø0.39" ø10 0.18"
4.5
0.18"
27 27
22.5 4.3 0.17" 1.06" 1.06"
0.89" 4 0.16"
7 0.28"
10.5 0.41" 10.5 0.41"
3.4 0.13"
20 0.79"
(28.2) (1.11") *Detail of slot
10.5 0.41"
10.2 0.4"
t=0.8 0.03" SUS304
59
Amplifier Dimensions CAD Data Download: www.keyence.com/CADG
Unit : mm inch
PS-N11N/N11P Cable type, Main unit PS-N12N/N12P Cable type, Expansion unit
ø3.9 ø0.15", 4-core × Brown/Blue: 0.34 mm², Black/Pink: 0.18 mm² ø2.6 ø0.1", 1-core × Black 0.34 mm²
Cable length: 2 m 6.6' Cable length: 2 m 6.6"
9.8
0.39" 9.8 0.39"
170° max.
Maximum 5.2 Maximum 5.2 0.2"
when the 0.2" when the
cover is cover is
opened opened
108.7 4.28" 32.6 108.7 4.28"
1.28" 32.6
1.28"
(37.6) (37.6)
(1.48") (1.48")
(13) (0.51") (13) (0.51")
PS-N11CN/N11CP M8 connector type, Main unit PS-N12CN/N12CP M8 connector type, Expansion unit
9.8 9.8 0.39" ø8.6 ø0.34"
0.39" ø8.6 ø0.34"
M8
27.5 35.4 M8 connector 27.5 35.4 connector
1.08" 1.39" 1.08" 1.39"
78.7 9.5 0.37" 78.7 9.5
3.1" 3.1" 0.37"
M8 connector cable (OP-73864 / 73865 sold separately) M8 connector junction cable (OP-85498 sold separately)
ø3.7 ø0.15" 4-core×0.28 mm² 6.7 ø3.7 ø0.15" 4×0.28 mm² 6.2 0.24"
Cable length L(m) 0.26" ø9.5 ø0.37" ø9 ø0.35"
Maximum
when the 5.2 0.2"
cover is
opened DIN-rail mounting
108.7 4.28"
32.6 25
1.28" 0.98" 20.8
(37.6) (29.5) (22.6) 0.82"
(1.48") (1.16") (0.89")
20.7 35.4
27.5 35.4 0.82" 1.39" 9.2 35.4 1.39"
1.08" 1.39" 69.8 0.36"
78.7 2.75" 53.8 2.12"
3.1" Material: Polycarbonate
Common for all types When the mounting bracket is attached (OP-73880 sold separately)
When several units are connected: No. of units L (mm inch) Cable type Reverse side 2-(4.4×3.4) (0.17"×0.13")
1 9.8 0.39" of mounting Spot facing: ø7.2 ø0.28",
d=3.2 0.13"
2 19.6 0.77" bracket
32.6
3 29.4 1.16" 1.28" 9.8
(40.9) 0.39"
End unit End unit*1 4 39.2 1.54" (1.61")
5 49.0 1.93" (16.3) 15
6 58.8 2.32" (0.64") 0.59"
31 1.22"
7 68.6 2.7"
2-ø3.4 ø0.13" Material: Polycarbonate
8 78.4 3.09" 3.8 29.8 1.17" 6.5 0.26"
0.15" Spot facing: ø6.4 ø0.25",
9 88.2 3.47" 32.6 25.4
1.28" 1" d=2.7 0.11"
10 98.0 3.86"
11 107.8 4.24" M8 connector type
12 117.6 4.63"
13 127.4 5.02"
32.6
14 137.2 5.4" 1.28"
(40.9)
15 147.0 5.79" (1.61")
16 156.8 6.17" (18.8)
(0.74")
6 L 6 17 166.6 6.56"
0.24" 0.24"
*1 End units must be used when several units are connected.(OP-26751) 2-ø3.4 ø0.13"
3.8 29.8 1.17" 6.5 0.26"
0.15" Spot facing: ø6.4 ø0.25",
32.6 25.4
1.28" 1" d=2.7 0.11"
60
Common options for LV-NEO/FS-NEO/PS-NEO
Amplifier securing
bracket OP-73880 [P.23]
(for main unit)
End unit
Specifications Dimensions
(when using OP-26751 [P.23]
expansion units)
2 per set
M8 connector cable
[P.23]
(2 m 6.6'/10 m 32.8')
10 m 32.8' type
Specifications Dimensions
OP-73865
M8 connector junction
cable OP-85498 [P.23]
Used to extend the M8 connector cable.
(2 m 6.6')
Specifications Dimensions
The LV-NEO / FS-NEO / PS-NEO Series has
different amplifier connectors than the FS-V30, LV,
Expansion Converter and CZ series.
This is an adapter to connect these models. OP-87199 [P.23]
Unit
It supplies power from the main unit to the expansion
unit and prevents interference.
*Communication is not supported.
61
Network Communication Unit
DeviceNetTM Network
Communication unit
NU-DN1
EtherNet/IPTM Network
Communication unit
NU-EP1
EtherCAT Network
Communication unit
NU-EC1
62 * System names and product names mentioned in this document are the trademarks or registered trademarks of their respective owners.
Dramatic reduction in wiring and installation time
Only a single communication cable is required between the PC/PLC ↔ and the NU Series for
wiring. This achieves a dramatic reduction in wiring and saves a significant amount of space.
In addition, wiring work that conventionally requires a great deal of time and effort has been
greatly reduced.
▲▲
No additional wiring required when No need for a terminal block
replacing sensors
No wires
Specifications Dimensions
Multiple sensors can be simultaneously managed
By utilizing the network, multiple sensors that exist on the same line can be simultaneously managed, significantly
increasing convenience and ease-of-use in the field.
The status of the sensors can be monitored and settings for all of the sensors can modified together from a touch panel or
computer.
Specifications Dimensions
it is too troublesome to go and look at need to be adjusted frequently, but it is to reoccur.... I cannot waste time just
each individual sensor.... time consuming to have to adjust each watching and waiting.
individual sensor every time…
Easy monitoring from the Product change with the Troubleshooting made easy!
display! push of a button!
The sensor status can be monitored on The NU allows for settings to be If sensor information (light intensity/
an HMI, PLC, or PC, making it easier to changed externally from an HMI, PLC, setting values/error output) is stored
detect problems before an error occurs. or PC. As a result, changeover time in the log, the cause of minor errors is
can be reduced, even where sensor easily identified.
settings must be changed frequently.
Specifications Dimensions
63
Lineup
e-CON
− NU-EN8N
Input unit
Specifications
Specifications Dimensions
Power during PoE power
Supply voltage: 24 V±10%, supply current: 360 mA or less*7
receiving*6
24 VDC±10%, ripple (p-p) 10% or less (with power supply connector)
Power voltage
48 VDC (Max.57 VDC) (During PoE power receiving)
Power consumption 1500 mW or less (60 mA max. at 24 V)*8
Weight (including connector) Approx. 80 g
Accessory Instruction manual, power connector, 2 end units
* Cannot connect to the following KEYENCE’s PoE power supply devices: [DT-100A], [DT-500], [NE-V08]
*1 When using the power PoE power receiving function, use the STP cable or Category 5 or higher UTP cable. *2 The number of connectable units is not limited when using a switch.
*3 “N-bus” is the name of KEYENCE’s wiring-saving system for sensor amplifiers. *4 Depends on the sensor amplifiers connected. *5 Value for the current which can be supplied to this
unit or to a sensor amplifier unit connected to this unit. *6 Power which can be supplied to the sensor amplifier when using the PoE power receiving function. *7 Varies according to the working
ambient temperature. (-20 to 45°C (-4 to 113°F): 360 mA or less, 45 to 50°C(113 to 122°F): 260 mA or less, 50 to 55°C(122 to 131°F): 140 mA or less) *8 Current to be supplied to the connected
sensor amplifier is not included.
Specifications Dimensions
Ethernet Transmission media Category 5e or higher STP cable
specifications Distance between
100 m 328.1'
nodes
Communication port RJ-45 × 2
EtherCAT communication Process data object communication (cyclic communication)
Compatible functions
specifications Mailbox communication (message communication) CoE compatible
Connectable sensors Sensor amplifiers with N-bus support*1
Number of
connectable sensor Up to 16 units*2
Sensor connection units
specifications
Power supply Power is supplied from the unit via a wiring-saving connector
Allowable passing
Total 1200 mA max.
current*3
Power voltage 24 VDC±10%, ripple (p-p) 10% or less
Power consumption 1700 mW or less (70 mA max. at 24 V)*4
Weight (including connector) Approx. 80 g
Accessory Instruction manual, power connector, 2 end units
Specifications Dimensions
*1 “N-bus” is the name of KEYENCE’s wiring-saving system for sensor amplifiers. *2 Depends on the sensor amplifiers connected.
*3 Value for the current which can be supplied to this product or a sensor amplifier unit connected to this product. *4 Current to be supplied to the connected sensor amplifier is not included.
*1 To connect the NU-EN8N to a communication unit, connect it after the sensor amplifier. Sensor amplifier connected after this unit will not be recognized by the communication unit.
*2 Power to the NU-EN8N is supplied from the connected communication unit.
65
Communication/Input Unit Dimensions CAD Data Download: www.keyence.com/CADG
Unit : mm inch
NU-CL1 NU-DN1
0.38"0.49" 1.95"
1.95" 0.38" 49.5
9.6 12.5 49.5 1.4" 0.21" 1.4"
9.6 125° 35.5
125° 35.5 5.4
0.09" max. 0.09" max.
2.4 2.4
Maximum Maximum
when the cover 56.4 when the cover (42.2)
is opened (42.2) 2.22" is opened 56.4 2.22"
(1.66")
58.3 (1.66") 20.3 0.8" 58.3 37.7
2.3" 37.7 2.3" 1.48"
1.48" 15.3 0.6"
NU-EP1 1.01"
NU-EC1 0.87"
25.6 0.62" 15.8 22.2
170° Maximum
0.07"
1.9 max. when the cover
is opened
73.6
(38.5) 0.8" 34.1 2.9"
(1.52")
20.3
1.34" 20.3 0.59"
(42.5) (38.5) 0.8"
(1.68") 15 0.59" (1.52") 15
(0.2)
(0.2) (0.01")
(0.01") 43.5 35.4
43.5 35.4
1.71" 1.39" 1.71" 1.39"
94.5 3.72" 17.6 0.69" 94.5 3.72" 17.6 0.69"
NU-EN8N 0.08"
2
1.75
When the tag (supplied with NU-EN8N) is attached.
1.18" 30
0.07" 1.0"
25.5 1.54"
39
4.1 0.37"
0.16" 9.5
(0.52") 0.26" 1.79"
(13.15) (P6.5×7=45.5) 7 0.28"
(6.5)(0.26")
3.08" 78.2
(44.9)
(1.77") (42) 1.94" 49.3
(1.65")
37.5
1.48"
21.7 35.4
0.85" 1.39"
72.8 2.87"
66
< Considerations when using the NEO Series>
Specifications Dimensions
LV-H65
LV-H67
LV-H100 LV-NH100
Thrubeam type LV-H110 LV-NH110 −
LV-H300 LV-NH300
* All sensor head LV-Sxx can be used with the LV-N Series amplifiers.
Specifications Dimensions
For infrared
Main unit LV-11A − 2 1 1 0
LV-H41
Specifications Dimensions
LV-N
Others 1
be aware that the number of connectable units is
FS-N13x/N14x 2
dependent upon the number of control outputs for each FS-N
Others 1
amplifier.
PS-N All models 1
(This depends on the Series with the smallest number of units, when LV-N, FS-N, and PS-N are mixed in a system.)
*1 Can be switched to DOUBLE mode by the amplifier mode setting. When DOUBLE mode is used, all connected amplifiers must be in DOUBLE mode.
*2 The number of units is 4 in normal mode and 8 in DOUBLE mode when connected to the LV-S31.
67
www.keyence.com
E-mail: keyence@keyence.com
E-mail: keyencecanada@keyence.com
E-mail: keyencemexico@keyence.com
Copyright (c) 2011 KEYENCE CORPORATION. All rights reserved. LVNeo-KA-GC-US 1025-7 611516