CERTIFICATION
VP-30
BATCH# _7070 E14
Se eee ee
[_VP30 [Visible Fenetrant_ [2 EC NANA err J
‘We here by certify that this batch of inspection material meets the requirements of:
1 - AMS-2644F and is listed onthe Qualified Products List QPL AMS-2644 (test reference AFWALIMLS 86-88).
2-Is approved by the U.S. Air Force Mitrials Laboratory, including toxicity requirements for qualification to AMS-2644F.
3-Is free of mercury contamination and was not ade in any mercury bearing equipment
44-Is fre of ll known Ozone depleting substances
5 Does not contain Polychlorinated Biphenyl (PCB's)
6-Is approved for use under ASTM E-16S/E 165-12 and ASTM E-1417/M-13.,and ASTM E-1418-10
7 - Meas the requirements of ASME Boller & Pressure Vessel Code 2010, Section V, Article 6, appendix T-641& 1-642,
8 - Meets the requirements of NAVSEA 250-1300-1§ 12.1.1, Rev 17
9 Moos the requirements of MilStd 21329 7.13.
10 Meets the requirements of RCC-M edition 2000, Section V-F,sub-sct
11 - Meets the requirements of Velan PS-008, Rev. 10.
12- Mos the requirements of ISO/FDIS 3452-2:2006, EN 571-3*
13 Meets the requirements of Framatome ANP Seimens AG; NFQS DC 103 Rev B 2008 § MC 4200.
PRODUCT
512393.
14- Moos the requirements of Flowserve
15-10 CFR part 2 applies.
Warranty shelf life is 5 years from date of batch approval. Po#
‘QUALITY ASSURANCE TESTS JREQUIREMENTS BATCH |
RESULTS
[Appearances 150 2152-33006) § 71 carro liquid, no sediment
Densiy: ISO 3452-2:200608) $7.3, so pik 838 gL @ 21. C7OF) 313 gi
Viscosity: ASTM D-445, AMS 26447 933.4, 190 3452220008) $74 p.1-2.6mmis @ 37.7 MOOR) 25 mm's|
Performance: ISO 3482-2:2006(E) 97.2 PL 2=(100% 50.>75% 50y)@ TOOL PASS]
Performance: NFQS DC 1003 Rev B 2004. § MC 4200 PL 2=(100% 50, >75% 304) 12250 PASS]
[Fash Poin: 190 3452-2:2006(E) $7 5: ASTM D-56, beircaa-r °C
[Washabiliy-MLC ISO 3452-2:2006(E) 97.5, Equal io MLC Standard PASS
[Water Tolerance AMS-2644F $ 3.35855, 150 5452-2.30065)97.10 fase 3.0%
[Sulfur Content: per ASTM E-165/E165M-129 9.1 2(D-1552 or DI29E5I0) [= 200 ppm (002) 160 ppm
[Chloride Content: ASTM E-16S/E165M-I2§9.1.2(0-808 or Annex 4) [= 200 pom (0.02) 10 ppm]
[rol Halogen Content: ASTM E-165/B165M-12 §9.12(D-808 or Annex _—= 20 ppm
Met-L-Chek Quality Assurance
er ere
(eeu Vase, Mey biiy-
ae mate
wn
Met-L-Chek Company, 1639 Euclid Street, Santa Monica, California 90404, U.S.A
Phone: 310-450-1111 Fax: 310-452-4046 Email: info@met-l-chek.com