Professional Documents
Culture Documents
CASE STUDY
Benefits: Appearance:
Acrydur® Bridge is a rough singlecoloured bridge covering
Weatherproof & UV resistent
system.
Nonslip finish
Seamless and flexible finish Life Expectancy
Damp proof membrane layer 10 - 20 years.
Very good chemical resistance
Fast installation
Curing down to -30°C
Low maintenance cost. SYSTEM DATASHEET
Application:
For all types of exterior use and extremely heavy loaded industrial floors, in combination with high demands to flexibility.
Acrydur® Bridge offers high wearability, impact and chemical resistant. The very fast curing of Acrydur® Bridge means, that
eventual traffic blocking time is minimized while installing the system.
Application conditions:
Temperature -30ºC to 30ºC, best 15 to 25ºC, max. moisture content in the concrete subfloor 5% by weight.
Temperature Resistance:
Acrydur® Bridge is resistant to temperature cycles up to 80°C. Extended periods at these temperatures and above will make
material susceptible to chemical attack and abrasion wear.
Slip resistance:
Acrydur® Bridge appears slip resistant. The skidresistance might be varied from moderate to pronounced.
Colours:
Limited, ask ULFCAR.
Acrydur® Bridge
3-component acrylic flooring system
EN 13813 SR-B1,5-AR1-IR4
Synthetic resin screed for internal uses
Fast curing Watertight Colour
Fire behavior: Dfl
Release of corrosive substances: SR
Water permeability: NPD
Wear resistance: AR1
Bond strength: B1,5
Impact resistance: IR4
Extremely Withstands Neutral oder and Impact sound insulation: NPD
Sound absorption: NPD
hard-wearing heavy-loads VOC free Heat insulation: NP
Technical data
Properties Value
Fully cured @ 20°C 24 hours
Applied thickness 4 - 6 mm
Hardness SHORE D 80