Professional Documents
Culture Documents
50
Bill of Material
Qty Description
Building Notes Hinging Recommended Power System 1 0.032 Music wire for control arms
1 0.062 Music wire (just smaller than the landing gear CF tube ID)
- Cut on the solid lines. Dashed lines are for reference for cuts on the opposite side. Use your judgment 1. Before gluing anything, hinge the top of the moving parts with Qty Description
before cutting. the fxied counterpart, at maximum deflection. 4 Dubro Mini E/Z connectors (#845)
3 -4 Micro servo with 15oz-in of torque or more (like the Hitec HS-55) 4 Dubro Control Horn Micro (#848)
- Do not cut all the way through for the wing spar, the landing gear carbon fibre (CF) rod and the eleva- Hinge tape (if you use 4 servos, mount the aileron servos on the top of the wing) 1 Dubro Micro Lite Wheels 2’’ (#200ML)
tor stiffener. Respect the spar thickness. Fixed 1 Dubro Micro Tail-Skid (#853)
1 28mm x 30mm outrunner with ~1000kV (like the Hacker A20-20L)
M
- A high-speed rotary tool like a Dremel is your friend. Use it to cut the CF and to make the grooves in the If using the 3-servo setup
ov
in
foam for the spars. 1 11.1V 3s lithium polymer battery ~1300mAh (like the Flight Power v2 Lite 2 Dubro Micro Ball link 0.032 (#928) if using the 3 servo setup
g
- If you are not sure about someting, ask an experienced builder for advice. 1 Medium foam safe CA glue
1 Foam safe CA accelerator
1 30min epoxy
1 Spray adhesive for plan transfer to Depron
1 Hot glue gun to hold the servos in place Copyright 2008 Marc-Olivier Duceppe.
All rights reserved.
1 Metal yardstick
Revision 1.02
1 #11 X-Acto knife with alot of blades