ic
Certificate of Completion
The Council Training In Academy Recognizes that
Yousef Nader Yousef Qandah
Nationality Jordanian National number 9951047416
Has attended and completed the training requirements for course
Design and Implementation of Mechanical Systems for Facilities
100 Hours
This certificate is awarded number 13/26/7106, Course Duration from 13/7/2019 to 12/10/2019.
Renan Aga ad asl) ya Aa
Ya 7
ahha sept yaslead yDesign and Implementation of Mechanical Systems for
Facilities
Course Report
Trainee Information:
Name:Yousef Nader Yousef Qandah.
Major: Mechanical Engineering.
Course: Design and Implementation of Mechanical Systems for Facilities.
Result: Passed.
Certificate Serial Number: 13/26/706.
Certificate issuance date: 12/10/2019.
Course Duration: 13/7/2019_ 12/10/2019.
Course Hours : 100 hour.
Site Training: Food and Medicine Laboratories 4 floors, 2500m?.each floor
Trainee Attendance: 95%
Rank: 1/10 Repeated
Mark: 76%
“Amman, Queen Rania Street, Malak Trading Complex, Building No.21
P.O.Box 19066, Amman 11196 Jordan
‘Tel: +962 6 533 7754/6 Fax: 4962 65337759 Website: wwwaplusjo.com —R-m:
info@aplusjo.comCourse Description:
Theoretical & Practical Course for designing mechanical systems HVAC, Plumbing and fire
fighting for all construction projects using local and international codes, standards and
software to remove any gabs may be occurs between university study and local or
international markets,
‘This course consists of 100 hours, 80 hours inside our academy for theoretical works,
software and standards using in several projects and another 20 hours will be in many
projects sites to make a clear vision about design and contracting for mechanical systems.
Then, the trainees will be able to make the design of the the following systems :
“HVAC:
Load calculations, Using Software, Unit selection, Duct Design, Pipe Design, Air terminal
Design, HVAC Accessories Design, installation on AutoCAD, Tables and details
* Water Supply
Pipes selection and calculations, pumps calculations, water supply systems, hot water
supply systems, underground water tanks, overhead water tanks, fittings
* Plumbing
Pipes selections and calculations, Plumbing systems, cesspools and local line, rain water
collection
* Swimming Pools
Swimming pools classifications, Mechanical parameters, schematic diagram, pumps,
heating
* Fire Fighting
Systems, pipes, sprinklers software, pumps
* BOQand Drawings
‘Amman, Queen Rania Street, Malak Trading Complex, Building No.21
P.O.Box 19066, Amman 11196 Jordan
‘Tel: +962 6533 7754/6 Fax: +96265337759 Website: wwwaaplusjo.com E-mail: info@aplusjo.comProject:
Trainee was requisted to design building with two floors, Roof and Site
The trainee is required to design the following systems based on an architectural plan
No. Section Yes/No a
| 1 | HVAC load calculations ¥. 8/10
2_ HVAC system selection Y 5
| 3 || Pipe Sizing and fittings ¥. 8/10
| 4 | Pumps Sellection and Pressure drop calculations Y 4/5
| 5 || Duct sizing and accessories y 7/10
| 6 || Fans Selection and External Static Pressure e 4/5
I Calculations
7_ | Water Supply Systems Design Y 15/20
8_ | Pumps Selection and Pressure drop calculations Y¥ 4/5
9 | Drainage System Design Y 15/20
10 || Fire Fighting Systems Design Y 7/10
11 | Quiz Y Pass
Recommendations & Observations:
1. V, Good work as first time
2. V. Good attendance
Trainer CEO
Eng. Fadi Al-Shalabi Eng. Adel Al-Qasas
ing Né
Amman, Queen
.0.Box 19066, Amman 11196 Jordan
‘Tol: +962 6533 7754/6 Fax: +9626 5337759 Website: www.aplusio,com E-mail: info@aplusjo.com