Determine the impulse response h[n] expressed as a
First Semester Term 2019-2020 sequence for -3≤n≤3 for the following an FIR filters Problem Set 5 using windowed-sinc method with a window w[n]=0.54+0.46cos(2πn/(N-1). Let Fs=8KHz. Names: __________________________________ (a) Lowpass filter with fc=1.5KHz and peak gain=5 (b) Bandstop filter with fcl=1KHz, fch=3KHz, and _______________________________________________________________ peak gain=5 \ _______________________________________________________________ 5. An ideal FIR bandpass filter has cut-off frequencies 2KHz and 2.5KHz if Fs=8KHz. It is implemented _______________________________________________________________ with an ideal FIR lowpass filter in cascade with an ideal FIR highpass filter such that Class Schedule: ____________________________ Hbp(Ω)=Hlp(Ω)Hhp(Ω) and hbp[n]=hlp[n]*hhp[n]. Instructions: 1. Show complete and orderly solutions. Use Determine hbp[n] expressed as a sequence for intermediate pad paper and write on one side only. -3≤n≤3. 2. Enclose all required final answers in rectangles. 6. Determine the difference equation of the following 3. Use this questionnaire as cover page for your 2nd- order Butterworth filters. Let Fs=8KHz. solutions. (a) Lowpass filter with fc=1.5KHz and peak gain=5 Problems: (b) Highpass filter with fc=3.5KHz and peak gain=5 (c) Bandpass filter with fcl=2KHz, fch=2.5KHz, and 1. A digital filter is defined by y[n]=2x[n]-0.8y[n-1]. peak gain=5 Determine the output y(t) if the input is (d) Bandstop filter with fcl=1KHz, fch=3KHz, and x(t)=2+3sin(1000πt)+sin(4000πt) volts. The ADC peak gain=5 and DAC have Fs=Fs'=8KHz. 2. Determine the type of frequency response, peak gain, and cut-off frequencies in Hz for the following filters. (a) h[n]={1, 1, 1} ▲ (b) h[n]={-1, 1, -1} ▲ (c) h[n]={-1,0,2,0,-1} ▲ (d) y[n]=2x[n]-0.8y[n-1] (e) y[n]=2x[n]+0.8y[n-2] 3. Determine the impulse response h[n] as a function of the unit impulse and sinc function for the following ideal FIR filters. Let Fs=8KHz. (a) Highpass filter with fc=3.5KHz and peak gain=5 (b) Bandpass filter with fcl=2KHz, fch=2.5KHz, and peak gain=5 (c) Multiband filter with magnitude response as shown