You are on page 1of 1

Specific Absorption Rate (SAR)

It’s a measure of the rate that body tissue absorbs radiation during cell phone use. Holding
a phone away from the body or using a wired earpiece lowers the amount of
radiation absorbed, and text messaging rather than talking, further lowers that amount.

What is the frequency of 2g 3g and 4g?


2G and 3G have had fixed frequencies, but 4G doesn't follow such rules. 2G is
usually run on 900Mhz or 1800Mhz worldwide, except America where 2G is on
800Mhz/850Mhz/1900Mhz. 3G is usually run on 900Mhz or 2100 Mhz, again, except
America where 3G is on 850Mhz/1700Mhz/1900Mhz.

The main difference between the two mobile telephone systems (1G and 2G), is that the
radio signals used by 1G network are analog, while 2G networks are digital . ... The max
speed of 2G with General Packet Radio Service ( GPRS ) is 50 Kbps or 1 Mbps with
Enhanced Data Rates for GSM Evolution ( EDGE )

Radio waves are non-ionising


5G waves are ultra high frequency and ultra high intensity. Whereas
1G, 2G, 3G and 4G use between 1 and 5 gigahertz frequency, 5G uses between 24 and 90
gigahertz frequency. Radio frequency radiation dissipates with distance, obeying the
inverse-square law.

Although 5G may improve our day to day lives, some consumers have voiced concern about
potential health hazards. Many of these concerns are over 5G's use of the higher energy
millimeter-wave radiation. ... It's ionizing radiation that is dangerous because it can break
chemical bonds

Safeguards
Envirochip neutralizes the harmful effect of radiation emanating from Mobile Phones, Laptops,
Tablets, PC’s & Wi-Fi Routers.

You might also like