Professional Documents
Culture Documents
Dated: 17-01-2020
Bid Document
Bid Details
Bid End Date/Time 27-01-2020 15:00:00
Bid Life Cycle (From Publish Date) 90 (Days)
Bid Offer Validity (From End Date) 30 (Days)
Ministry/State Name Ministry Of Human Resource Development
Department Name Department Of Higher Education
Organisation Name Central Universities Ministry Of Human Resource
Development
Office Name Central University Of Karnataka
Total Quantity 81
Item Category Wireless Access Point ( PAC Only )
Bidder Turnover (Last 3 Years) 8 Lakh (s)
OEM Average Turnover (Last 3 Years) 66 Lakh (s)
MSE Exemption For Years Of Experience No
And Turnover
Startup Exemption For Years Of Experience No
And Turnover
Document required from seller Bidder Turnover,Certificate (Requested in ATC),OEM
Authorization Certificate,OEM Annual Turnover
*In case any bidder is seeking exemption from
Experience / Turnover Criteria, the supporting
documents to prove his eligibility for exemption must
be uploaded for evaluation by the buyer
Bid to RA enabled Yes
EMD Detail
Required No
ePBG Detail
1/6
Beneficiary:
Section Officer
Central University Of Karnataka, Department of Higher Education, Central Universities Ministry of
Human Resource Development, Ministry of Human Resource Development
(Vikramadithya Ambarao)
Splitting
Bid splitting not applied.
1. OEM Turn Over Criteria: The minimum average annual financial turnover of the OEM of the
offered product during the last three years, ending on 31st March of the previous financial year,
should be as indicated in the bid document. Documentary evidence in the form of certified Audited
Balance Sheets of relevant periods or a certificate from the Chartered Accountant / Cost Accountant
indicating the turnover details for the relevant period shall be uploaded with the bid. In case the
date of constitution / incorporation of the OEM is less than 3 year old, the average turnover in
respect of the completed financial years after the date of constitution shall be taken into account for
this criteria.
Make cambiumnetworks
Model cambiumcnpilote410
Technical Specifications
2/6
Wireless Speed Up 867 867
to (Mbps)
Max Wireless Signal 30 30
Range im Mts
Channel Width (MHz) 80 *
Maximum Data Rate 867 *
MBps
Supported WEP, WPA-PSK, WPA- WEP, WPA-PSK, WPA-
Encryption TKIP, WPA2 AES, TKIP, WPA2 AES,
802.11i, EAP-TLS.,WEP, 802.11i, EAP-TLS., WEP,
WPA-PSK,WPA-TKIP,802 WPA-PSK, WPA-TKIP,
.11,EAP-TLS,WPA AES 802.11, EAP-TLS, WPA
AES
Dedicated Console Port Not Available *
Receiver Sensitivity in 100 *
db
Transmit power 24 *
(tx)(dBm)
Radio Resource Not Available *
Management such for
power
channel,coverage hole
detection and
performance
optimization
Support for Load Available *
Balancing between 2-4
Ghz and 5 Ghz
Support for Not Available *
Configurable Carrier
Threshold
Device Management Web-based *
Configuration Interface
(GUI)
Support for Mesh Available *
Networking
Support for QoS for Available *
Voice over Wireless
Support for MU-MIMO Available *
Number of MIMO 2 x 2 :2 *
supported & Spatial
Streams
Number of WLAN 16 *
(SSID) per AP
Maximum clients Nos 256 *
Support for Available *
Autonomous access-
point option
3/6
USB Ports Not Available *
Number of 1 *
10/100/1000 port
mGig support Not Available *
Fiber port (in case of Not Available *
outdoor AP)
Support for Bluetooth Not Available *
Low Energy (BLE)
support on AP
Support for Beam Available *
forming
Operate as a sensor for Not Available *
wireless IPS
Support for QoS and Not Available *
Video Call Admission
Control capabilities
Support for Rogue Available *
access point detection
Support for Wireless Not Available *
Intrusion Protection
System
WPC certified Yes *
Wi-Fi CERTIFIED Yes *
Support non-Wi-Fi Not Available *
detection for off-
channel rogues and
Containment for both
radio while serving the
client simaltaniously
Powering options (Such AC/DC With With Power *
as AC/DC, 802/3af PoE, Addopter,802.3af
802/3at PoE+), specify PoE,802.3at
PoE+,802.3bt UPoEF
Power POE (Watt) 13 *
Environmental Yes *
Standard : plenum-
rated (UL2043) for
Indoor and IP67 for
Outdoor
Operating Temperature 0 to 50 *
Range (Degree C)
Operating Humidity 95 *
(%RH)
Dimension (mm x mm 17.0 x 17.0 x 4.1 cm *
x mm)
Weight (grams) 384 *
4/6
On Site OEM 3 3, 5 Or higher
Warranty (Years)
* Specifications highlighted in bold are the Golden Parameters.
* Bidders may note that In respect of non-golden Parameters, the specifications 'Values' chosen by
Buyer will generally be preferred over 'Bid requirement ( allowed Values) by the Buyer.
5/6
of the defects / service requirement during warranty period, Seller has to complete the
required Service / Rectification within 5 days time limit. If the Seller fails to complete service
/ rectification with defined time limit, a penalty of 0.5% of Unit Price of the product shall be
charged as penalty for each week of delay from the seller. Seller can deposit the penalty
with the Buyer directly else the Buyer shall have a right to recover all such penalty amount
from the Performance Security (PBG).Cumulative Penalty cannot exceed more than 10% of
the total contract value after which the Buyer shall have the right to get the service /
rectification done from alternate sources at the risk and cost of the Seller besides forfeiture
of PBG. Seller shall be liable to re-imberse the cost of such service / rectification to the
Buyer.
---Thank You---
6/6