NO ACTIVITY POTENTIAL HAZARD TYPE OF PPE STANDARD REMARKS
1 General activity Flash fire Protective clothing Long-sleeved fire-retardant coveralls (c/w reflective stripes) Red color Specified Fabric Weight 4.5 oz/ yd HSE Personnel NFPA 2112 certified Flammable resistant cloth (FRC) Scot lite reflective m-3M NFPA 2112 certified Offshore / Oil Flammable resistant cloth (FRC) and Gas Scot lite reflective m-3M Or, as per client requirement Japan drill material Navy blue color Scotch lite reflective Cotton 100%, Japan drill material Orange color Scotch lite reflective Safety Shoe ANSI Z41.1 or ASTM 2413 Dual density polyurethane outsole Complete with midsole and toe cap Chemical-resistant ANSI Z41.1 or ASTM 2413 boots with Neoprene or other polymer boots in a polymer safety toe resistant to the chemicals present. Safety helmet ANSI Z89.1-2009 Type 1, Class E & G Safety glasses clear (for ANSI Z87.1 AS/NZS 1337 night) Clear or mirror clear lens color UV385 Safety glasses smoke ANSI Z87.1 AS/NZS 1337 (for day) Smoke or mirror smoke lens color UV385 Prescription Lens safety ANSI Z87.1 AS/NZS 1337 glasses with side shields Dust mask OSHA 29 CFR 1910.134 NIOSH – N95 2 Near water activity Life Jacket BS EN 396 F28 USG Approved Type III International orange color Minimal two adjustable belts and chest strap Reflective strap Work Vest USCG Approved type V List of PPE Requirements - PT PP EPC
NO ACTIVITY POTENTIAL HAZARD TYPE OF PPE STANDARD REMARKS
International orange color Two encircling belts with snag resistant buckles 3 Chemical handling Chemical gloves EN 374-3 100% Nitrile compound material Sol-Vex Safety glasses ANSI Z87.1 CE (EN 166) Respirator with specific TPR Material cartridge ANSI Z88.2 or AS/NZS 1715:2009
4 Working at Height Full Body Harness ANSI Z359.1 and F2413
double lanyard Gloves Cotton material with one side PVC dots 5 Noise area Hearing lost Ear plugs AS/NZS1270:1999 Ultra-Fit (in carrying case) Ear muff OSHA 29 CFR 1926.52 or ANZI S3.19-1974 NRR value minimum 24 dB 6 Welding electric arc, gas cutting, Welding Shield ANSI Z87.1 2003 torch brazing, torch soldering Lens thickness requirements must be at least 3.0 mm thick Welding gloves Thermal protection OSHA 3151-12R 2003 EN407 7 Manual handling Gloves Cotton material with one side PVC dots
Cut resistant gloves EN388 Impact Cut
Biohazard gloves EN374-2 Thermal hazard Heat resistant gloves EN407 Cold hazard Cold resistant gloves EN511 ionizing radiation Radioactive gloves EN421 including contamination and direct exposure to radiation 8 Rigging Activity Heavy duty/ high EN 388: 2004 impact gloves ANSI/ISEA Level 1 9 Electrical rubber gloves ASTM D 120-87 Rubber material List of PPE Requirements - PT PP EPC
NO ACTIVITY POTENTIAL HAZARD TYPE OF PPE STANDARD REMARKS
EN60903 10 Grinding (both handheld or Safety glasses ANSI Z87.1 bench type grass cutting) CE (EN 166) Polycarbonate lenses Dust mask OSHA 29 CFR 1910.134 NIOSH – N95 11 Confined space SCBA ANSI Z88.2 BS EN 12021:1999, BS 529:2005 (supersedes BS 4275-1997), COSHH Regulation