Professional Documents
Culture Documents
Grade 10 Computer Final 4th Exam
Grade 10 Computer Final 4th Exam
2.From what location are the 1st computer instructions available on boot up?
1. ROM BIOS
2. CPU
3. boot.ini
4. CONFIG.SYS
Answer: Option 1
1. 15.
2. 9
3. 25
4. 32
Answer: Option 1
1. No-CD installed
2. bad ram
3. slow processor
4. Incorrect CMOS settings
Answer: Option 4
1. There is no difference
2. Machine codes are in binary, mnemonic codes are in shorthand English
3. Machine codes are in shorthand English, mnemonic codes are in binary.
4. Machine codes are in shorthand English, mnemonic codes are a high-level
language.
Answer: Option 2
1.BIOS/CMOS
2.CONFIG.SYS
3.autoexec.bat
4.COMMAND.COM
Answer: Option 1
1. over heat
2. power surges
3. EMI
4. incomplete path for ESD
Answer: Option 1
1. System ROM
2. Power supply
3. System chassis
4. Video controller
Answer: Option 3
1. data bus
2. control bus
3. address bus
4. multiplexed bus
Answer: Option 1
12.When installing PCI NICS you can check the IRQ availability by looking at
1. dip switches
2. CONFIG.SYS
3. jumper settings
4. motherboard BIOS
Answer: Option 4
13. In which mode can two or more applications be stored in memory at the
same time?
1. Segmented Mode
2. Unprotected Mode
3. Real Mode
4. Protected Mode
Answer: Option 4
1. protocol speed
2. a fiber speed
3. megabits per seconds
4. minimum and maximum server speed
Answer: Option 3
17.You suspect a virus has entered your computer. What will not be affected
by the virus?
1. CMOS
2. Boot sector
3. Floppy disks
4. Program files
Answer: Option 1
1. blue or red
2. blue or white
3. red or black
4. white or orange
Answer: Option 4
1. ATX
2. AT
3. BABY AT
4. All of the above
Answer: Option 1
21.A hard disk is divided into tracks which are further subdivided into:
1. clusters
2. sectors
3. vectors
4. heads
Answer: Option 2
1. Surge protector
2. Capacitor
3. Voltmeter
4. Resistor
Answer: Option 4
24.In laser printer technology, what happens during the conditioning stage?
1. data bus
2. timer bus
3. control bus
4. address bus
Answer: Option 2
1. wired I/O
2. I/O mapping
3. dedicated I/O
4. memory-mapped I/O
Answer: Option 4
1. TMC solvent
2. Silicone spray
3. Denatured alcohol
4. All-purpose cleaner
Answer: Option 4
30.To find out how much memory is available, you could type _____
1.EMM
2.MEM
3.CHKDSK
4.MEMMAKER
Answer: Option 2