Professional Documents
Culture Documents
Model
NOTE:
If there is no response to
click on the link above,
please download the PDF
document first and then
click on it.
216B3 Skid Steer Loader CD300001-UP (MACHINE) POWERED BY C2.2 Engine(S... 2/5
Illustration 1 g01053175
1. Use a suitable lifting device, Tooling (B), and Tooling (A) to support piston pump (5).
2. Position piston pump (5). The weight of the piston pump is approximately 61 kg (134 lb).
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis... 2019/10/6
216B3 Skid Steer Loader CD300001-UP (MACHINE) POWERED BY C2.2 Engine(S... 3/5
Illustration 2 g01053307
3. Use Tooling (C) to install bolt (6). Tighten bolts (6) to a torque of 160 ± 30 N·m
(118 ± 22 lb ft).
Note: Refer to Service Magazine, SEPD1272, "A New Bolt Is Used To Fasten The Hystat
Pump To The Engine" for bolt replacement information.
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis... 2019/10/6
216B3 Skid Steer Loader CD300001-UP (MACHINE) POWERED BY C2.2 Engine(S... 4/5
Illustration 3 g01051393
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis... 2019/10/6
216B3 Skid Steer Loader CD300001-UP (MACHINE) POWERED BY C2.2 Engine(S... 5/5
Illustration 4 g01051392
End By:
Copyright 1993 - 2019 Caterpillar Inc. Sun Oct 6 23:30:25 UTC+0800 2019
All Rights Reserved.
Private Network For SIS Licensees.
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis... 2019/10/6
216B3 Skid Steer Loader CD300001-UP (MACHINE) POWERED BY C2.2 Engine(S... 1/6
Shutdown SIS
Previous Screen
i02787466
Removal Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
6V-9508 Face Seal Plug (11/16 - 16 THD) 3
6V-9829 Cap Assembly (11/16 - 16 THD) 3
ZZ
6V-9509 Face Seal Plug (13/16 - 16 THD) 2
6V-9830 Cap Assembly (13/16 - 16 THD) 2
Start By:
a. Release the hydraulic system pressure. Refer to Disassembly and Assembly, "Hydraulic
System Pressure - Release".
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis... 2019/10/6