Professional Documents
Culture Documents
Polyurethane
Elastomers (TPU)
Elastollan® – Product Range
Elastollan®
Nomenclature
Elastollan® 11 85 A 10 W 000
U = UV-stabilized
Elastollan®
Portfolio 5
Portfolio
Ether or ester
A 65 A - 55 D Color-fast, non-yellowing, hydrolysis-resistant (ether)
aliphatic
Ether or ester
L 75 A - 80 D Transparent, long-term UV-stability
aliphatic
Very good wet grip, very flexible, very soft in part, highly transparent in
Supersoft Ester or ether 35 A - 65 A
part, ESD grades with very good volume resistivity
See tech. product Excellent adhesive properties, low activation temperature, good solubility
Bondura Ester
information with a broad viscosity range
6 Elastollan®
11 Series
Elastollan® 11 Series
Thermoplastic polyether polyurethane elastomer
For more detailed information, please refer to the product information and processing guidance.
Elastollan®
11 Series 7
45 40 55 50 70 65 60 55
45 45 30 45 25 35 60 65
20 20 25 20 25 35 25
39 40 45 35 45 45 43
20 28 30 30 32 30 30
900 750 700 700 600 650 600
nb nb nb nb nb nb nb
nb nb nb nb nb nb nb
V0 / V2 HB V2 HB V2
Elastollan® 12 Series
Thermoplastic polyether polyurethane elastomer
For more detailed information, please refer to the product information and processing guidance.
Elastollan®
12 Series 9
Highly transparent
Excellent hydrolysis resistance
Cold flexibility
Resistance to microorganisms
Unit of
Property Measurement Test Procedure 1185 A 10 FHF 1190 A 10 FHF 1191 A 10 FHF
Hardness Shore A DIN ISO 7619-1 (3s) 89 90 91
Hardness Shore D DIN ISO 7619-1 (3s) 37
Density g/cm³ DIN EN ISO 1183-1-A 1.23 1.25 1.27
Tensile strength MPa DIN 53504-S2 35 25 25
Elongation at break % DIN 53504-S2 600 550 600
Stress at 20 % elongation MPa DIN 53504-S2 3.5 5 5
Stress at 100 % elongation MPa DIN 53504-S2 8 8 10
Stress at 300 % elongation MPa DIN 53504-S2 13 11 12
Tear strength kN/m DIN ISO 34-1.B(b) 60 60 65
Abrasion mm³ DIN ISO 4649-A 35 30 40
Compression set at 23 °C / 72 hours % DIN ISO 815 25 26
Compression set at 70 °C / 24 hours % DIN ISO 815 45 43
Tensile strength after storage
MPa DIN 53504-S2 20 15
in water at 80 °C for 42 days
Elongation at break after storage
% DIN 53504-S2 600 640
in water at 80 °C for 42 days
Notched impact strength (Charpy) +23 °C kJ/m² nb nb
DIN EN ISO 179-1
Notched impact strength (Charpy) -30 °C kJ/m² 120 46
Burning behavior
UL 94 V0 V0
(depending on wall thickness)
For more detailed information, please refer to the product information and processing guidance.
Elastollan®
FHF / HFFR Series 11
1192 A 10 FHF 1147 D 10 FHF 1154 D 10 FHF 1185 A 10 HFFR SP 3092 A 10 HFFR 1270 D 10 FHF 1280 D 10 FHF
91 94 86 95
48 58 52 69 80
1.25 1.29 1.27 1.42 1.62 1.29 1.32
17 13 30 23 15 27 49
550 400 400 580 400 300 10
7 13 4 8 18
9 19 6 7 20
10 33 8 7 22
55 60 110 55 42 156 96
80 55 30 85 220
30 30
50 45
7 20 12
nb 50
21 3
V0 V2 (0.4 mm)
V0 / V2
(0.43-0.47 mm ALL) V2 (3.0 mm)
12 Elastollan®
C Series
Elastollan® C Series
Thermoplastic polyester polyurethane elastomer
Unit of
Property Measurement Test Procedure C 78 A 10 C 80 A 10 C 85 A 10
Hardness Shore A DIN ISO 7619-1 (3s) 80 82 87
Hardness Shore D DIN ISO 7619-1 (3s) 36
Density g/cm³ DIN EN ISO 1183-1-A 1.18 1.19 1.19
Tensile strength MPa DIN 53504-S2 50 50 50
Elongation at break % DIN 53504-S2 650 650 650
Stress at 20 % elongation MPa DIN 53504-S2 2 3 3
Stress at 100 % elongation MPa DIN 53504-S2 4 5 6
Stress at 300 % elongation MPa DIN 53504-S2 8 9 10
E-modulus from tensile test MPa DIN EN ISO 527
Tear strength kN/m DIN ISO 34-1.B(b) 60 65 70
Abrasion mm³ DIN ISO 4649-A 30 30 30
Compression set at 23 °C / 72 hours % DIN ISO 815 25 25 25
Compression set at 70 °C / 24 hours % DIN ISO 815 35 35 35
Tensile strength after storage
MPa DIN 53504-S2 35 35 38
in water at 80 °C for 21 days
Elongation at break after storage
% DIN 53504-S2 650 650 650
in water at 80 °C for 21 days
Notched impact strength (Charpy) +23 °C kJ/m² nb nb nb
DIN EN ISO 179-1
Notched impact strength (Charpy) -30 °C kJ/m² nb nb nb
Burning behavior
UL 94 HB HB
(depending on wall thickness)
For more detailed information, please refer to the product information and processing guidance.
Elastollan®
C Series 13
C 88 A 10 C 90 A 13 C 95 A 10 C 98 A 10 C 59 D 53 C 60 D 53 C 64 D 53 C 74 D 50
88 93 96
37 42 47 52 57 60 62 73
1.19 1.2 1.21 1.22 1.23 1.23 1.23 1.25
50 45 55 50 50 50 45 45
600 550 550 550 500 450 400 350
3.5 6 8 11 12 16 17 28
6 9 11 14 17 20 24 30
13 15 22 26 30 35 35 35
160 250 330 390 730
75 102 120 130 160 180 200 240
30 38 30 30 30 30 30 20
25 25 30 30 30 40 40 40
40 40 45 50 50 50 55 60
38 40 40 40 43 43 43 45
nb nb nb nb nb nb nb 120
nb nb nb 25 12 8 7 4
HB HB HB HB HB HB HB HB
14 Elastollan®
B Series
Elastollan® B Series
Thermoplastic polyester polyurethane elastomer
For more detailed information, please refer to the product information and processing guidance.
Elastollan®
B Series 15
B 80 A 11 B 85 A 11 B 90 A 15 B 95 A 15 B 98 A 15 B 60 D 15 B 64 D 11
82 83 91 96
42 48 50 60 64
1.19 1.2 1.21 1.22 1.22 1.23 1.24
50 55 55 55 55 55 55
600 600 550 550 500 500 450
2 2 4 7 8 13 17
5 4 7 10 12 16 19
15 15 20 22 30 30 35
140 240 320
85 75 90 100 130 150 180
35 35 30 30 25 25 25
20 25 25 30 35 35 35
30 35 40 40 45 45 50
40 40 40 40 40 40 40
600 600 550 500 500 450 400
nb nb nb nb nb nb nb
nb nb nb 200 18 10 8
16 Elastollan®
S Series
Elastollan® S Series
Thermoplastic polyester polyurethane elastomer
For more detailed information, please refer to the product information and processing guidance.
Elastollan®
S Series 17
S 70 A 12 S 80 A 10 S 85 A 10 S 90 A 55 S 95 A 55 S 98 A 53 S 60 D 53 D 64 D 53
70 81 85 93 96
41 48 55 60 64
1.22 1.22 1.23 1.24 1.24 1.25 1.25 1.26
34 50 55 55 50 45 45 45
720 750 650 600 550 500 500 450
1 2 2 6 8 13 15 22
3 4 5 9 11 16 18 23
5 8 8 13 20 23 34 38
200 250 410
55 60 70 95 120 150 170 200
42 40 35 30 30 25 25 25
25 25 25 25 30 40 45
35 35 45 45 45 50 55
nb nb nb nb nb nb nb nb
nb nb nb nb 14 13 4 4
18 Elastollan®
500 Series
Unit of
Property Measurement Test Procedure 585 A 11 590 A 53 598 A 53 598 A 10 560 D 53 560 D 59
Hardness Shore A DIN ISO 7619-1 (3s) 85 94
Hardness Shore D DIN ISO 7619-1 (3s) 41 53 51 61 60
Density g/cm³ DIN EN ISO 1183-1-A 1.25 1.25 1.26 1.26 1.28 1.26
Tensile strength MPa DIN 53504-S2 40 50 50 50 45 55
Elongation at break % DIN 53504-S2 600 600 500 500 450 510
Stress at 20 %
MPa DIN 53504-S2 3 5 9 15
elongation
Stress at 100 %
MPa DIN 53504-S2 6 8 12 18.5
elongation
Stress at 300 %
MPa DIN 53504-S2 10 13 16 23
elongation
Tear strength kN/m DIN ISO 34-1.B(b) 95 100 150 130 180 170
Abrasion mm³ DIN ISO 4649-A 35 35 30 40 30 30
Compression set at
% DIN ISO 815 17 24 26 24
23 °C / 72 hours
Compression set at
% DIN ISO 815 35 36 40 46
70 °C / 24 hours
For more detailed information, please refer to the product information and processing guidance.
Elastollan®
800 Series 19
Unit of
Property Measurement Test Procedure 880 A 13 N 890 A 10
Hardness Shore A DIN ISO 7619-1 (3s) 77 93
Hardness Shore D DIN ISO 7619-1 (3s)
Density g/cm³ DIN EN ISO 1183-1-A 1.2 1.22
Tensile strength MPa DIN 53504-S2 40 45
Elongation at break % DIN 53504-S2 700 480
Stress at 20 % elongation MPa DIN 53504-S2 1.8 6
Stress at 100 % elongation MPa DIN 53504-S2 4.2 10
Stress at 300 % elongation MPa DIN 53504-S2 7.6 23
Tear strength kN/m DIN ISO 34-1.B(b) 60 110
Abrasion mm³ DIN ISO 4649-A 35 45
Compression set at 23 °C / 72 hours % DIN ISO 815 32 32
Compression set at 70 °C / 24 hours % DIN ISO 815 54 43
For more detailed information, please refer to the product information and processing guidance.
20 Elastollan®
A Series
Elastollan® A Series
Thermoplastic aliphatic polyether/-ester polyurethane elastomer
Color-fast
Non-yellowing
Hydrolysis resistant (ether)
For more detailed information, please refer to the product information and processing guidance.
Elastollan®
L Series 21
Elastollan® L Series
Thermoplastic aliphatic polyether/-ester polyurethane elastomer
Superior transparency
Long-term UV-stability
For more detailed information, please refer to the product information and processing guidance
22 Elastollan®
Soft Products
For more detailed information, please refer to the product information and processing guidance.
Elastollan®
Soft Products 23
Soft 35 A 12 P Soft 45 A 12 P Soft 45 A 12 ESD 565 A 12 P 560 A 13 P TSG 565 A 12 ESDM B 60 A 12 ESD
37 46 47 66 60 63 63
1.18 1.18 1.18 1.22 1.22 1.22 1.17
12 25 30 30 24 30 30
1150 950 900 850 850 850 800
0.5 0.6 0.5 1.1 1.0 1.0 1.0
1.0 1.5 1.2 2.7 2.5 2.4 2.5
2.5 3.0 2.7 6.5 6.0 5.2 6.5
27 42 35 65 50 60 50
165 39 60 55 90 60 60
30 34 36 22 29 20
70 53 49 37 45 30
nb nb nb
nb nb nb
5*107 8*107 5*107
24 Elastollan®
HPM Series (aliphatic)
For more detailed information, please refer to the product information and processing guidance.
Elastollan®
HPM Series (aliphatic) 25
Color-fast
Soft touch
Aliphatic HPM
70 90
26 Elastollan®
HPM Series (aromatic)
Vicat softening temperature at 10 N and 120 °C/h (Proc. A 120) °C DIN EN ISO 306
For more detailed information, please refer to the product information and processing guidance.
Elastollan®
HPM Series (aromatic) 27
Aromatic HPM
C 60 A 15 C 65 A 15 C 70 A 15 C 75 A 15 C 85 A 15 C 90 A 15 C 95 A 15 785 A 10 754 D 15
HPM HPM HPM HPM HPM HPM HPM HPM HPM
63 67 71 75 85 91 96 85
54
1.17 1.18 1.18 1.18 1.2 1.21 1.23 1.18 1.23
35 37 40 42 45 45 50 45 35
1000 950 900 900 750 600 550 700 440
0.9 1.5 1.5 2 3.5 4 8.4 3.5 13
1.5 2 2.5 3.5 6 8 12 6 17
2 4 5 6 11 13 16 11 19
40 44 45 50 70 80 110 70 150
55 55 50 50 40 45 21 40 25
25 25 25 25 20 20 25 20 25
43 37 35 35 35 30 35 30 36
60 55 50 35 50 45 50 50 42
20 35 30 35 35 38 46 40 55
1100 900 850 800 800 740 650 750 550
nb nb nb nb nb nb nb nb nb
nb nb nb nb nb nb nb nb nb
Elastollan® R Series
Glass fiber-reinforced thermoplastic polyurethane elastomer
For more detailed information, please refer to the product information and processing guidance.
Elastollan®
R Series 29
Glass fiber-reinforced
Very high rigidity
Low thermal expansion coefficient
Low shrinkage
Very good impact strength
Unit of
Property Measurement Test Procedure 1170 A 10 FC 1180 A 10 FC
Hardness Shore A DIN ISO 7619-1 (3s) 71 80
Hardness Shore D DIN ISO 7619-1 (3s)
Density g/cm³ DIN EN ISO 1183-1-A 1.08 1.11
Tensile strength MPa DIN 53504-S2 30 45
Elongation at break % DIN 53504-S2 850 650
Stress at 20 % elongation MPa DIN 53504-S2 1.5 2
Stress at 100 % elongation MPa DIN 53504-S2 3.5 4.5
Stress at 300 % elongation MPa DIN 53504-S2 6.3 8
Tear strength kN/m DIN ISO 34-1.B(b) 45 55
Abrasion mm³ DIN ISO 4649-A 45 30
Compression set at 23 °C / 72 hours % DIN ISO 815 20 25
Compression set at 70 °C / 24 hours % DIN ISO 815 39 45
Tensile strength after storage in water
MPa DIN 53504-S2 20 30
at 80 °C for 42 days
Elongation at break after storage in water
% DIN 53504-S2 900 700
at 80 °C for 42 days
Notched impact strength (Charpy) +23 °C kJ/m² nb nb
DIN EN ISO 179-1
Notched impact strength (Charpy) -30 °C kJ/m² nb nb
Unit of
Property Measurement Test Procedure B 80 A 11 FC B 85 A 11 FC
Hardness Shore A DIN ISO 7619-1 (3s) 82 83
Hardness Shore D DIN ISO 7619-1 (3s)
Density g/cm³ DIN EN ISO 1183-1-A 1.19 1.2
Tensile strength MPa DIN 53504-S2 50 45
Elongation at break % DIN 53504-S2 60 600
Stress at 20 % elongation MPa DIN 53504-S2 2.4
Stress at 100 % elongation MPa DIN 53504-S2 4.6
Stress at 300 % elongation MPa DIN 53504-S2 11.6
Tear strength kN/m DIN ISO 34-1.B(b) 85 75
Abrasion mm³ DIN ISO 4649-A 35 35
Compression set at 23 °C / 72 hours % DIN ISO 815 17
Compression set at 70 °C / 24 hours % DIN ISO 815 39
Tensile strength after storage in water
MPa DIN 53504-S2
at 80 °C for 42 days
Elongation at break after storage in water
% DIN 53504-S2
at 80 °C for 42 days
Notched impact strength (Charpy) +23 °C kJ/m²
DIN EN ISO 179-1
Notched impact strength (Charpy) -30 °C kJ/m²
For more detailed information, please refer to the product information and processing guidance.
Elastollan®
Food Contact Series 31
32 35 37 35 35 35 35
nb nb nb nb nb nb nb
nb nb nb 190 18 12 5
nb nb
nb 200
32 Elastollan®
Special Products
Applications
For more detailed information, please refer to the product information and processing guidance.
Elastollan®
Special Products 33
alternative ether base with ether base ester base ether base, high ester base ester base ester base
ether base extremely high for opaque for opaque water-vapor i.a. for films i.a. for i.a. for
with very good water-vapor films films permeable TPU blends toothed belts
mechanics permeability
87 85 87 85 81 85 88 92
1.15 1.21 1.12 1.19 1.17 1.2 1.2 1.21
35 35 45 42 40 40 30 40
700 850 550 630 700 650 570 570
5 3 3 2 3 5
7 5 6 5 5 8
17 12 105 10 15
55 45 60 72 40 85 78 100
50 70 30 40 40 59 45
22 26 26 22
34 46 43 37
nb nb nb nb
nb nb nb nb
34 Elastollan®
Special Products Infinergy ®
For more detailed information, please refer to the product information and processing guidance.
Elastollan®
Special Products Infinergy ® 35
25 40 50 40 55 70
65 95 115 100 130 160
180 230 290 200 275 350
General Grades
Unit of
Physical Property Measurement AS-626SH AS-626H AS-626 AS-626L
Viscosity range SC%: 15 % in MEK cps/25 °C 3600 ~ 4200 2600 ~ 3200 1600 ~ 2200 800 ~ 1200
Hydrolysis-Resistant Grades
Unit of
Physical Property Measurement AS-632H AS-632 AS-632L AS-632A
Viscosity range SC%: 15 % in MEK cps/25 °C 2600 ~ 3200 1600 ~ 2200 800 ~ 1200 1600 ~ 2200
For more detailed information, please refer to the product information and processing guidance.
Elastollan®
Bondura Series 37
For more detailed information, please refer to the product information and processing guidance.
Elastollan®
Hotbond Series 39
AH-571 AH-571E AH-573 AH-576 AH-579 AH-580 AH-582 AH-583 AH-588 AH-591
80 ± 2 80 ± 2 78 ± 2 79 ± 2 80 ± 2 75 ± 2 79 ± 2 80 ± 2 85 ± 2 90 ± 2
110 ± 10 110 ± 10 140 ± 10 119 ± 10 110 ± 10 90 ± 10 119 ± 10 118 ± 10 115 ± 10 110 ± 10
20 ± 5 7±2 10 ± 5 7±2 3±1
4±2 4±2 5±2 20 ± 5 30 ± 10
(190 °C) (177 °C) (177 °C) (177 °C) (190 °C)
8±3 8±3 2±1 8±3 3±1 15 ± 5 8±3 2±1 2±1 6±2
10 ± 5 10 ± 5 10 ± 3 10 ± 5 40 ± 10 10 ± 5
Note
The data contained in this publication are based on our current knowledge and
(September 2016)
Please also visit our website: If you have any technical questions
PMEI 1607 RE