Professional Documents
Culture Documents
Presostato Diferencial Huba DB605 en
Presostato Diferencial Huba DB605 en
Technical overview Medium Pressure connections
The differential pressure switches of Liquids and neutral gases Hose connector Ø 6.2 mm
type series 605 are specially designed for Orifice installed for damping pulsating
control and monitoring applications in pressure at P2 (option)
gasfired boilers. Pressure range
20 … 400 Pa
Higher pressures on request Installation arrangement
With turn-on point below 30 Pa, diaphragm
vertical or horizontal with electrical connec-
Tolerable overload on one side tions facing downward.
5000 Pa at -30 … +85 °C
1500 Pa at -30 … +110 °C Please indicate installation arrangement
Temperature
The distinct advantages Medium and ambiance -30 … +110 °C
• Fitting of the switch Storage -30 … +110 °C
– Fast mounting with snapping bracket Higher temperature on request
system
• Adjusting security
– Switching point- and switching Service life
difference adjusting screw are secured Mechanical, > 106 switching cycles
after factory adjustment through
covering
– No false manipulation through Electrical connection
mounting or service personel AMP connector 6.3 mm or 4.8 mm
• High contact strength (10 cN typical) according to DIN 46244
– Essentially less susceptibility to
polution of contact
• Roll operation of contact surface Protection standard
– Less sensitive to contact polution Not mounted IP 00
through self cleaning effect With contact safety guard IP 30
• Form of diaphragm and material With cover, without seal IP 54
– Through use of 2-component silicon With cover and seal IP 65
longer long-time stability With DIN EN 175301-803-A connector IP 65
– Through new trapeoid diaphragm
enlargement exact transfer of contact
release and therefore exact switching
points
C – with bracket A
D – with bracket B
A B C D
0 200
0 10 20 30 40 50 0 20 40 60 80 100
Switching difference (Pa) Switching difference (Pa)
Kontaktkraft Simplified representation of the new DPS 605 contact system. The
Pa
high contact pressure results form the optimized length ratios of
Tolerance of switching point LC and LD.
▲ ▲ ▲ ▲ ▲ ▲
+/- 5
Pivot point
+/- 4
Switching
+/- 3 point
Pa
0 50 100 150 220 300 400
LC
LD
I [A]
0.4 0.6
2
0.3
0.4
1
0.2
2 0.2
0.1
0 0.0
Can also be operated with TTL-load
0 40 80 120 160 200 240 0 40 80 120 160 200 240
U [V] U (V) U [V] U (V)
Electrical connections
1 Feeder (COM)
2 NC contact
3 NO contact
Cover with seal Cover without seal Contact safety guard Contact safety guard
and PT screw with PT screw with PT screw with PT screw
100306 100307 Cable exit AMP2 Cable exit AMP1
100309 100308
Accessories
www.hubacontrol.com