Professional Documents
Culture Documents
Scope
1. Submit concrete mix designs for each type and strength of concrete required at
least thirty 30 days before placing concrete. New mix designs shall be verified by an
approved independent testing laboratory and shall be coordinated with design
requirements and Contract Documents.
Cement
Aggregates
3. Recent independent test results confirming compliance with the specified
requirements and referenced standards along with full details of the proposed sources
of aggregates.
Water
Admixtures
Submittal
6. Submit complete mix design data for each separate mix to be used on the
Project in a single submittal with at least the following information:-
a. Type of cement.
Appendix – A1 Page 1 of 2
g. Type of admixture(s).
i. Initial and final concrete setting time for each mix design as per ASTM C403.
k. Air content.
l. Target temperature.
m. Bleeding, if specified.
p. Hardened density.
7. Data should be from the same production facility that will be used for the Project.
8. Mix Design data shall include but not be limited to the following:-
c. Submit strength test records, mix design materials, conditions, and proportions
for concrete used for record of tests and determination of required average
compressive strength.
Appendix – A1 Page 2 of 2