Professional Documents
Culture Documents
Tolerences PDF
Tolerences PDF
TOLERANCES
**MAXIMUM OR
MAXIMUM OR
TOLERANCE
TOLERANCE
SHAPE
SHAPE DIMENSION
DIMENSION MINIMUM
MINIMUM
%
% of Nominal
Nominal
TOLERANCES
TOLERANCES
ANGLES
ANGLES
±0.010" min.
tt== thickness
thickness ± 10%
±0.26mm min.
b = flange
±0.094" max.
flange width
width ± 5%
±2.4mm max.
± 0.094" max.
d = depth
depth ± 5%
±2.4mm max.
CHANNELS
CHANNELS
±0.010" min.
t = thickness
thickness ± 10%
±0.26mm min.
±0.094" max.
b = flange
flange width
width ± 5%
±2.4mm max.
±0.094" max.
d = depth
depth ± 5%
±2.4mm max.
BEAMS
BEAMS
±0.010" min.
t = thickness
thickness ± 10%
±0.26mm min.
±0.094" max.
b = flange
flange width
width ± 5%
±2.4mm max.
±0.094" max.
d = depth
depth ± 5%
±2.4mm max.
FLATSHEET
FLAT SHEET
±0.040" max.
thickness
t = thickness ± 10%
±1.02mm max.
+0.094” max.
b=
b=width
width
-0.187” min.
± 3%
+2.4mm max.
-4.8mm min.
min.
*ENGLISH
METRIC
OUTSIDE
OUTSIDE
SHAPE
SHAPE DIMENSION
DIMENSION DIMENSION TOLERANCES
TOLERANCES
CONDITION
CONDITION
ROUND &&SQUARE
ROUND SQUARE Under 1"
±20%
TUBE
TUBE t = thickness
thickness Under 25.4mm
1" and up 25.4mm
±15 %
and up
Under 1" ±0.020"
od = outside
outside Under 25.4mm ±0.5mm
dimension
dimension 1" and up 25.4mm ±0.040"
and up ±1.0mm
ROUND ROD
ROUND ROD &
SQUARE BAR
SQUARE BAR
od = outside
outside Up to 3" ±0.010"
dimension
dimension Up to 76.2mm ±0.26mm
FLATNESS
Flatness is measured in the center with the weight of the profile minimizing the deviation
by contact with a flat surface.
STRUCTURAL SHAPES
STRUCTURAL SHAPES Allowable deviation
Allowable deviation from flat
flat
RODS, BARS, & FLAT
BARS, &
SHEET
SHEET Width All Thickness
All Thickness
Up to 1" 0.008”
Up to 25.4mm .21mm
Straightness is measured in the center with the weight of the pultrustion minimizing the
deviation by contact with a flat surface.
ANGLE, BEAM
BEAM Allowable deviation
Allowable deviation from
from straight
AND CHANNEL
AND CHANNEL
0.050”/ft.
All widths
4.2mm/m
Diameter/Depth
Per Meter
Up to 1" 0.020”
Up to 25.4mm 1.7mm
ROUND, SQUARE,
ROUND, SQUARE, AND Allowable deviation from
Allowable deviation from straight
RECTANGULAR
RECTANGULAR TUBE
Per Foot
Diameter/Depth
Per Meter
Up to 2" 0.020”
Up to 50.8mm 1.7mm
FLATSHEET
FLAT SHEET AND PLATE Allowable
Allowable deviation from
from straight
straight
*ENGLISH
METRIC
Twist is measured with the weight of the pultrusion minimizing the twist.
ALL PROFILES
ALL PROFILES
Allowable twist
Allowable twist
ANGULARITY
Allowable
Allowable deviation from
deviation from specific
specific angleangle
ALL
ALLPROFILES
PRO FILES Thickness up
up to
tan 1 1/2O x width of
Thickness to3/4”
3/4" flange in inches
Thickness up to 19mm
Thickness up to 19mm tan 1 1/2O x width of
flange in
flange in mm
mm
ALL PROFILES
ALL PROFILES Allowable
Allowable deviation from
deviation from specific
specific length
length
SQUARENESS OF ENDCUT
Allowable
Allowable deviation from
deviation from square
square
ALL
ALLPROFILES
PROFILES tan 1O x width in inches
All thicknesses
tan 1° x width in millimeters
*ENGLISH
METRIC