Professional Documents
Culture Documents
Select all
options you can set on the MikroTik wireless interface
a. mode=ap-bridge
d. mode=bridge
2. When viewing the routes in Winbox, some routes will show "DAC" in the first column.
These flags mean:
Select one:
a. Direct,Available,Connected
b. Dynamic,Available,Created
c. Dynamic,Active,Connected
d. Dynamic,Active,Console
3. Which of the following would prevent unknown clients from connecting to your AP?
Choose the BEST answer
Select one:
a. Check the "Do not permit unknown client" box in the wireless configuration
b. Uncheck "Default Authenticate" in the wireless card configuration, and add each known
client's MAC address to your connect-list configuration
d. Uncheck "Default Authenticate" in the wireless card configuration, and add each known
client's MAC address to your access-list configuration ensuring that you enable
"authenticate" in the entry
e. Add each known client's MAC address to your access-list configuration is the only step
needed
The correct answer is: Uncheck "Default Authenticate" in the wireless card configuration,
and add each known client's MAC address to your access-list configuration ensuring that
you enable "authenticate" in the entry
a. EoIP
b. IPIP
c. MLPPP
d. PPTP
e. Nstreme
Select one:
The correct answer is: Yes, Nstreme can be used for both SSIDs
Select one:
a. IP:192.168.2.2/24 gateway:202.168.125.45
b. IP:192.168.0.1/24 gateway:192.168.2.1
c. IP:192.168.1.223/24 gateway:248.115.148.136
e. IP:192.168.2.253/24 gateway:202.168.0.1
7. It it possible to use the MikroTik Nstreme protocol with Windows wireless clients, if they
install a special driver that can be downloaded from the MikroTik webpage?
Select one:
True
False
a. D = Drop
9. Is it possible to limit how many clients are able to connect to an access point?
Select one:
a. Yes
10. You start a scan for wireless networks on you access point. What will happen?
Select one:
Select one:
a. 5500,5700
b. 5500 - 5700
c. 5500-5700
d. 5500/5700
e. 5500 5700
Select one:
True
False
Select one:
a. situation where the packet is routed through the same sequence of routers until the TTL
expires
b. situation where the packet is routed through the same router twice
The correct answer is: situation where the packet is routed through the same sequence of
routers until the TTL expires
14. What letters appear next to a route, which is automatically created by RouterOS when
user adds a valid address to an active interface?
a. A
b. C
c. D
d. S
e. I
Select one:
a. 255
b. 1
c. 30
d. 10
Select one:
The correct answer is: Handles a list of Client's MAC Address to permit/deny connection to
AP
17. In which order are the entries in Access List and Connect List processed?
Select one:
a. By interface name
b. In a random order
c. In sequence order
b. The only way to prevent wireless clients connections - disable wireless interface
The correct answer is: Wireless access-list could allow and deny access to your AP
19. Making use of a narrower channel width such as 10MHz or 5MHz will increase your
wireless link speed.
Select one:
True
False
20. To connect your MikroTik router to a wireless access point, you have to:
The correct answer is: Use the same Band (5 GHz, 2.4 GHz, ...), Use the same SSID as on
accesspoint
21. In order to use dynamic keys in your security profile for an AP, you MUST set up the dhcp
server to provide the dynamic keys
Select one:
True
False
The correct answer is 'False'.
22. The following image shows a RouterOS Wireless Access List configuration
Wireless interface "Default Authenticate" is unchecked. What will happen with clients
connecting to this AP?
b. 00:0C:42:31:38:A2 will connect to wlan1 when the signal strength is greater than -60
Client 00:0C:42:31:38:A2 dapat terhubung ke AP karena rule #0 dan rule #1, sedangkan
00:0C:42:61:6C:90 tidak dapat terhubung ke AP karena tertahan di rule #2, sehingga rule
#3 tidak berlaku.
The correct answer is: 00:0C:42:31:38:A2 will connect to wlan1 when the signal strength is
greater than -60, Client with mac-address 00:0C:42:31:38:A2 will connect to wlan1