Professional Documents
Culture Documents
57
www.hilti.com
Company: Page: 1
Address: Specifier:
Phone I Fax: | E-Mail:
Design: Concrete - 3 Mar 2020 Date: 3/3/2020
Fastening Point:
Specifier's comments:
1 Input data
Anchor type and size: HIT-HY 200 + HIT-Z 5/8
Item number: 2018447 HIT-Z 5/8" x 8" (insert) / 2022793 HIT-HY
200-R (mortar)
Effective embedment depth: hef,opti = 95.3 mm (hef,limit = 190.5 mm)
Material: DIN EN ISO 4042
Approval No.: ESR-3187
Issued I Valid: 4/1/2019 | 3/1/2020
Proof: Design Method ACI 318-14 / Chem
Stand-off installation: without clamping (anchor); restraint level (baseplate): 2.00; eb = 30.0 mm; t = 12.7 mm
2
Hilti Grout: CB-G EG, epoxy, fc,Grout = 103.00 N/mm
Baseplate :
R lx x ly x t = 250.0 mm x 250.0 mm x 12.7 mm; (Recommended plate thickness: not calculated)
R
- The anchor calculation is based on a rigid baseplate assumption.
Input data and results must be checked for conformity with the existing conditions and for plausibility!
PROFIS Engineering ( c ) 2003-2019 Hilti AG, FL-9494 Schaan Hilti is a registered Trademark of Hilti AG, Schaan
1
Hilti PROFIS Engineering 3.0.57
www.hilti.com
Company: Page: 2
Address: Specifier:
Phone I Fax: | E-Mail:
Design: Concrete - 3 Mar 2020 Date: 3/3/2020
Fastening Point:
Input data and results must be checked for conformity with the existing conditions and for plausibility!
PROFIS Engineering ( c ) 2003-2019 Hilti AG, FL-9494 Schaan Hilti is a registered Trademark of Hilti AG, Schaan
2
Hilti PROFIS Engineering 3.0.57
www.hilti.com
Company: Page: 3
Address: Specifier:
Phone I Fax: | E-Mail:
Design: Concrete - 3 Mar 2020 Date: 3/3/2020
Fastening Point:
3 Warnings
• Please consider all details and hints/warnings given in the detailed report!
Input data and results must be checked for conformity with the existing conditions and for plausibility!
PROFIS Engineering ( c ) 2003-2019 Hilti AG, FL-9494 Schaan Hilti is a registered Trademark of Hilti AG, Schaan
3
Hilti PROFIS Engineering 3.0.57
www.hilti.com
Company: Page: 4
Address: Specifier:
Phone I Fax: | E-Mail:
Design: Concrete - 3 Mar 2020 Date: 3/3/2020
Fastening Point:
Input data and results must be checked for conformity with the existing conditions and for plausibility!
PROFIS Engineering ( c ) 2003-2019 Hilti AG, FL-9494 Schaan Hilti is a registered Trademark of Hilti AG, Schaan